Hi Jeff,
it's unsupported, but with some precautions you could minimize the risks of panic:
* evacuate (provided you have enough spares) the shelf using o disk replace start[-f] [-m] <disk_name> <spare_disk_name> * check that all (relevant) disks have 2 paths o storage show disk -p * -> none of the disks should be in use now, all should be spares o you could now: disk remove <disk_name> o spins them down and let's ONTAP know you're about to remove them... * bypass the shelf on the one path (e.g. the upper ESH) o wait a few minutes (~5) to stabilize the ONTAP MP-config o don't know if that is necessary, but better safe than sorry... * bypass the shelf on the other path (e.g. the lower ESH)
Of course if you have SyncMirror, it's a lot easier, but even there you should offline the affected plex(es), just to be nice... (e.g. aggr offline MyAggr/plex03)
Hope that helps, tell us how it went...
Sebastian
On 12.02.2013 22:13, Jeff Cleverley wrote:
Greetings,
Is there a way to remove DS14 MK4 shelves from a running cluster? I need to look into isolating some drives and removing some shelves and would like to do it without having to halt the cluster. This is a 7.3.5.1 Ontap cluster on FAS6080s.
Thanks,
Jeff