You do not say whether this is 7-Mode or C-Mode, but you mention SVM, in which case I assume it is C-Mode. For C-Mode that is not possible. MCC must be setup on clean system without ant data or configuration.
For 7-Mode it is possible but certainly not online. For a start, you will need to move second controller in second chassis so no failback will be possible until you install FC-VI in both controllers. Also you need to change some chassis/controller settings in maintenance boot and they must be the same on both chassis/controllers.
--- Sent from my Fujitsu LIFEBOOK S937 With best regards Andrei Borzenkov Senior System Engineer FJ EMEIA PR FOCP RU SM FSO [cid:image004.gif@01CEE08A.195DCF10] FUJITSU Zemlyanoy val 9, 105064 Moscow, Russia Tel.: +7 (495) 730 6220 ext. 2247 Mob.: +7 (916) 678 7208 E-mail: Andrei.Borzenkov@fujitsu.com Web: ts.fujitsu.comhttp://ts.fujitsu.com/ Company details: OOO Fujitsu Technology Solutions / ts.fujitsu.com/imprinthttp://ts.fujitsu.com/imprint.html This communication contains information that is confidential, proprietary in nature and/or privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) or the person responsible for delivering it to the intended recipient(s), please note that any form of dissemination, distribution or copying of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender and delete the original communication. Thank you for your cooperation. Please be advised that neither Fujitsu, its affiliates, its employees or agents accept liability for any errors, omissions or damages caused by delays of receipt or by any virus infection in this message or its attachments, or which may otherwise arise as a result of this e-mail transmission.
From: Toasters toasters-bounces@teaparty.net On Behalf Of Heino Walther Sent: Thursday, November 19, 2020 12:23 PM To: toasters@teaparty.net Subject: Converting HA into MC ?
Hi there
Can anyone please tell me if it is possible to convert a normal AFF8080HA into an AFF8080SMC? (there is only one disk shelf attached)
I can imagine I would need the following: - 2 x FCVI Cards - 1 x Empty AFF8080 chassis - 4 x QSFP to LC cables - 1 x disk shelf identical to current shelf
First job is to install the FCVI cards, which can be done with a few failovers. Then we need to do a failover and pull out the downed controller and install it into the new chassis, and attach the two systems. We then need to change the chassis setup from the maint.-console. Configure the FCVI cards and do a giveback. .. … As you maybe can tell, this is just of the top of my head 😉 Has anyone tried this? The plan was to convert a running system without any downtime… then mirror up the aggregates, move the SVMs, and then convert back to a normal HA setup again…
But won’t start this if there is a gotcha somewhere… and there is a somewhat high risk of that? 😊
/Heino
