Trouble is, you can't enable ALUA, if you haven't enabled HA. (according to the documentation...) He can't enable HA, since it's a single controller... :-( @Pete: Did you try? Did you get an error message?
Sebastian
On 23.04.2013 11:16, Clark, Andre wrote:
Regardless of single controller or not, since you have two physical cable connected you still need to enable ALUA on the igroup. Enable ALUA and your issue should go away.
*Regards,*
*André M. Clark **| Sr. Consulting Engineer, Team Lead | Insight Integrated Systems http://www.insightintegrated.com/ | 917.388.8236*
*/Tell me I will forget... Show me I may remember... Involve me I WILL UNDERSTAND!!!/*
*/Start by doing what's necessary, then what's possible, and suddenly you are doing the impossible!!!/*
*From:*toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] *On Behalf Of *Peter Kain *Sent:* Monday, April 22, 2013 16:59 *To:* Toasters@teaparty.net *Subject:* FA2240 & Solaris (Sparc) Multipathing not working.
For the past 2 years I've been accessing LUNs on our FAS3240 from a Solaris Sparc host (Solaris 10 Update 9) using FCP. There are two QLA2340 cards on the Solaris host. Each is cabled to a separate brocade switches, creating 4 paths to the same LUN.
Solaris multipathing was enabled when the Solaris host was created (stmsboot -e)
I created the igroup on the FAS3240 with ALUA enabled.
FAS3240B> version NetApp Release 8.0.2P6 7-Mode: Fri Jan 27 14:48:08 PST 2012
This all worked creating for lack of a better term, a single virtual path to represent the 4 physical paths on the Solaris system.
Example:
/dev/rdsk/c13t60A98000646762364634634B7847616Cd0s2 -> ../../devices/scsi_vhci/ssd@g60a98000646762364634634b7847616c:c,raw mailto:../../devices/scsi_vhci/ssd@g60a98000646762364634634b7847616c:c,raw
We recently purchased a FAS2240 with a single PCM for additional space with the optional mezzanine card with dual FC ports. Since it's a single controller when I create an igroup it's without ALUA.
The problem. When I create a LUN on the FAS2240, the Solaris host is showing two separate paths to the same LUN rather than a single path. There are in fact two separate physical paths but I expect multipathing to create a single virtual path.
fas2240> version NetApp Release 8.1.2P2 7-Mode: Wed Feb 20 19:58:27 PST 2013
- two paths to the same LUN ... not what we want
lrwxrwxrwx 1 root root 71 Apr 18 16:50 c0t500A098281975936d11s2 -> ../../devices/pci@1c,600000/QLGC,qlc@1/fp@0,0/ssd@w500a098281975936,b:c mailto:../../devices/pci@1c,600000/QLGC,qlc@1/fp@0,0/ssd@w500a098281975936,b:c
lrwxrwxrwx 1 root root 71 Apr 18 16:51 c5t500A098181975936d11s2 -> ../../devices/pci@1d,700000/QLGC,qlc@1/fp@0,0/ssd@w500a098181975936,b:c mailto:../../devices/pci@1d,700000/QLGC,qlc@1/fp@0,0/ssd@w500a098181975936,b:c
Any suggestions? I've got a call open with EMC(Solaris) and will open one with NetApp Support as well.
Thanks,
-- Pete Kain 310-506-4475
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters