When I try to boot it panics and says it has no root volume.
Chris Chandler 919-274-7684
On Aug 19, 2018, at 18:34, Timothy Naple <tnaple@BERKCOM.commailto:tnaple@BERKCOM.com> wrote:
Chris,
It may have shutdown due to raid timeout if you did not replace the disks.
Just boot it back up and reassign the spares.
Tim
From: chris@dhinnovations.commailto:chris@dhinnovations.com Sent: August 19, 2018 3:27 PM To: tnaple@BERKCOM.commailto:tnaple@BERKCOM.com Cc: tmacmd@gmail.commailto:tmacmd@gmail.com; toasters@teaparty.netmailto:toasters@teaparty.net Subject: Re: Failed Aggregate 0
The partner has six spares but the cluster is offline and the unit is sitting at the CFE prompt.
Chris Chandler 919-274-7684
On Aug 19, 2018, at 18:31, Timothy Naple <tnaple@BERKCOM.commailto:tnaple@BERKCOM.com> wrote:
Christoper,
aggr0 is still online just double degraded. Looks like you just need to put some spares in there and let it rebuild.
Does the partner have any spares? (Run 'aggr status -s' on the partner)
Or perhaps do you have any spares around or unassigned disks?
Tim
From: chris@dhinnovations.commailto:chris@dhinnovations.com Sent: August 19, 2018 3:23 PM To: tmacmd@gmail.commailto:tmacmd@gmail.com Cc: toasters@teaparty.netmailto:toasters@teaparty.net Subject: Re: Failed Aggregate 0
Aggr State Status Options aggr0 online raid_dp, aggr root, diskroot, nosnap=off, raidtype=raid_dp, degraded raidsize=16, raid_lost_write=on, 64-bit ignore_inconsistent=off, snapmirrored=off, rlw_on resyncsnaptime=60, fs_size_fixed=off, lost_write_protect=on, no_delete_log=off, ha_policy=cfo, hybrid_enabled=off, percent_snapshot_space=0%, free_space_realloc=off, raid_cv=on, thorough_scrub=off Volumes: dcs_ds_01, dcs_iso, vol0 Plex /aggr0/plex0: online, normal, active RAID group /aggr0/plex0/rg0: double degraded, block checksums RAID group /aggr0/plex0/rg1: double degraded, block checksums RAID group /aggr0/plex0/rg2: normal, block checksums
________________________________ From: tmac <tmacmd@gmail.commailto:tmacmd@gmail.com> Sent: Sunday, August 19, 2018 6:23:54 PM To: Christopher D. Chandler Cc: Toasters Subject: Re: Failed Aggregate 0
You did not include many details. RAID 4 or RAID-DP? Sounds like you are using RAID4 if you have a double disk failure and you lost an aggregate. --tmac
Tim McCarthy, Principal Consultant
Proud Member of the #NetAppATeamhttps://twitter.com/NetAppATeam
I Blog at TMACsRackhttps://tmacsrack.wordpress.com/
On Sun, Aug 19, 2018 at 6:21 PM dhichandler <chris@dhinnovations.commailto:chris@dhinnovations.com> wrote: I have a FAS3140 running OnTap 8.2.5 and I have had a double partity disk failure in one of our raid groups and looking for help recovering. The unit is out of warranty and support. Any help is appreciated.
----- Christopher Chandler CEO DH Innovations, LLC -- Sent from: http://network-appliance-toasters.10978.n7.nabble.com/ _______________________________________________ Toasters mailing list Toasters@teaparty.netmailto:Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters