I was interested in this as well, we want to run a scheduled snmp check which will verify our system is working. I would like to write some sort of RSH job to generate a generic trap which we could run weekly. Pulling out a fan is actually how we checked this, but it is not a preferable regular testing procedure. Any Ideas? Drew
-----Original Message----- From: Eisler, Alex [mailto:alex.eisler@intel.com] Sent: Wednesday, July 10, 2002 8:21 AM To: 'Mark Allen'; toasters@mathworks.com Subject: RE: How can I test or simulate an SNMP trap?
Unscrew one of the fans, pull it out, wait for the light to turn orange, push it back in. That should fire 4 snmp traps: 1. FanFail 2. Status critical 3. FanRepaired 4. Status normal
Alex.
-----Original Message----- From: Mark Allen [mailto:markallen@micron.com] Sent: Tuesday, July 09, 2002 19:29 To: toasters@mathworks.com Subject: How can I test or simulate an SNMP trap?
All:
I set up some snmp traps via filer view and I would like to simulate or test the traps to make sure they works. I set up traps for a failed disk, failed pdu,
failed fan, and cluster failover notification. The filer is in production and I would like to find a way to test this out without actually failing the hardware myself. Any ideas?
-Mark