Hi,
when i get this right you are moving data within on volume.
e.g.
/vol/project/data1/data2copy
to
/vol/project/data2/destination
When this is on the same filer a move should proceed within seconds, as you are used to have it on a local hard disk. You can just use "Drag-and-Drop" when connected to the share with sufficient rights.
Just give it a try with a testvol.
Regards
Jochen
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Knut Kristan Weber Sent: Friday, February 29, 2008 10:20 AM To: toasters@mathworks.com Cc: winserver-team@science-computing.de Subject: move data within CIFS
Hello *,
we have a NetApp working as a CIFS-Filer. A collegue wants to move about 6 TB of data in the directory scruture one level up within the same volume.
Using the filer with a LUN as a block device would work like this. A normal windows Server also can move data in between the same drive letter without copying it - just in a scond.
But the NetApp has no solution I know so far to make a move when it works itwself as a CIFS filer. And even worse it does not only cost disk space because it copies and deletes afterwards, but also all the 6 TB data move over the LAN.
Is there something like a move in advanced mode or any undocumented ways? Or to use NDMP copy in such a way?
thanks a lot in advance
------------------------------------------------------------
with kind regards ______________________________________creating IT solutions
Dipl.-Chem. Knut Kristan Weber
Senior Solutions Engineer CAx Professional Services
science + computing ag Hagellocher Weg 73 phone +49 7071 94 57 473 72070 Tübingen, Germany fax +49 7071 94 57 411 http://www.science-computing.de