Thanks. I'm on 6.3.1 so it's probably likely that it is the bug, right?
#-----Original Message----- #From: owner-toasters@mathworks.com #[mailto:owner-toasters@mathworks.com] On Behalf Of Illa, Randolph #Sent: Tuesday, January 13, 2004 1:31 PM #To: deanan; toasters@mathworks.com #Cc: Illa, Randolph #Subject: RE: f800 batteries # #Deanan, #'nv' output confirms that the battery is ok. This is #probably burt 91910... # #===== Short_Fields #==================================================== ##dbver 44 #id 91910 #title "NVRAM battery in the chassis is #*worsening*" when battery is OK # # #This is fixed in several Ontap releases including; 6.3.2P1, #6.3.2P2, 6.3.3P2, 6.4.1P1, 6.4.2P1... # #HTH # #-randy # #-----Original Message----- #From: deanan [mailto:list@delusion.com] #Sent: Tuesday, January 13, 2004 11:52 AM #To: toasters@mathworks.com #Subject: f800 batteries # # # #Hi, # #I have an older f840 no longer on support that's getting a #low battery warning. #Although nv says it's ok, I'd like to replace the battery: #filer3*> nv #NVRAM3 size: 134217728 (board max = 256MB) #Battery status: OK #EEPROM Signed: YES #Battery voltage: 6720mV #LM81 Multiplier: 56 #EEPROM Version: 2 # #Is there someone that sells these batteries or knows specifically what #battery to get? (I can't open the filer because it's in a #remote location) # #Thanks, # #Deanan # # # #-----Original Message----- # #From: owner-toasters@mathworks.com # #[mailto:owner-toasters@mathworks.com] On Behalf Of Bui, Marcus # #Sent: Tuesday, January 13, 2004 7:23 AM # #To: 'Jon Michael Gimpel'; 'toasters@mathworks.com' # #Subject: RE: cifs audit # # # #It seems the server running the rsh script was not in the # #Filer's host.equiv. After host.equiv updated, the script # #worked. Should of double check :-) # # # #Thanks for the response. # # # #Marcus # # # # -----Original Message----- # # From: owner-toasters@mathworks.com # #[mailto:owner-toasters@mathworks.com] On Behalf Of Jon #Michael Gimpel # # Sent: Tuesday, January 13, 2004 1:47 AM # # To: toasters@mathworks.com # # Subject: Re: cifs audit # # # # # # What are you attempting to audit? Is it the CIFS file # #system .. such as read's, delete's, permission changes etc? # #If so, CIFS still needs to be set to audit like that of the # #native NTFS structure. You will need to do this via explorer by: # # # # - right clicking the directory or file # # - security tab # # - advanced # # - auditing # # - adding a common group or suspected user # # - selecting what you are attempting to audit # # # # -Jon # # # # # # # # "Bui, Marcus" Marcus.Bui@aiminvestments.com wrote in # #message news:0D1B378426DB3B4DB200AF4738F3E9E7090FD101@USHOUXML04... # # # # I have F820 running DOT 6.4.2P6 with CIFS only. # # I noticed the cifs audit log does not log all events. The # #audit log is dump and saved every night at midnight via a rsh # #script. Looking through several log file, there are only a # #few entries in each of the file. All of the entries are # #within 16 minutes after midnight when the audit file is dump. # # These are the settings. I compare it with two other Filers, # #F880c DOT 6.4.2P12, with the same settings the audit log #worked fine. # # # # # # cifs.audit.enable on # # cifs.audit.file_access_events.enable on # # cifs.audit.logon_events.enable on # # cifs.audit.logsize 204800000 # # cifs.audit.saveas /etc/log/adtlog.evt # # # # Any ideas? # # # # # # thanks, # # # # Marcus Bui # # # # # # # #________________________________ # # # # # # # # # # Confidentiality Note: The information contained # #in this message, and any attachments, may contain # #confidential and/or privileged material. It is intended # #solely for the person or entity to which it is addressed. Any # #review, retransmission, dissemination, or taking of any # #action in reliance upon this information by persons or # #entities other than the intended recipient is prohibited. If # #you received this in error, please contact the sender and # #delete the material from any computer. # # # #________________________________ # # # #Confidentiality Note: The information contained in this # #message, and any attachments, may contain confidential and/or # #privileged material. It is intended solely for the person or # #entity to which it is addressed. Any review, retransmission, # #dissemination, or taking of any action in reliance upon this # #information by persons or entities other than the intended # #recipient is prohibited. If you received this in error, # #please contact the sender and delete the material from any computer. # # # # #