about linux iscsi prb, sorry, i didn't took the correct archive (!) i make another try with the good one from cisco, the one from intel seems deprecated
cisco -> linux-iscsi-3.3.0.1 intel -> IntelLabs-v18-011603
bye
Stephane Bentebba wrote:
with the simulator, it works great <smile> from windows, but from linux, i get errors as the following :
telnet on filer : << nac5> Thu Jul 3 18:13:21 MEST [nac5: iscsi.notice:notice]: ISCSI: iswta, New session from initiator iqn.1986-03.com.intel:ajay1 at IP addr 192.9.200.200 Thu Jul 3 18:13:22 MEST [nac5: iscsi.notice:notice]: ISCSI: iswta, New session from initiator iqn.1986-03.com.intel:ajay1 at IP addr 192.9.200.200 Thu Jul 3 18:13:22 MEST [nac5: iscsi.protocol.violation:warning]: ISCSI: iswta, iSCSI protocol violation, 'SCSI_CMD with F=0, but unsolicited DATA_OUTs n ot supported'
my unix module (driver) log info in /var/log/messages as follow (sorry for the long log, i cropped a little to make smaller) : << ..... plenty of similar messages as bellow (4 try overall) Jul 3 18:13:08 genghis kernel: * MaxCmdSN: 63 * Jul 3 18:13:08 genghis kernel: * ExpStatSN: 1 * Jul 3 18:13:08 genghis kernel:
Jul 3 18:13:08 genghis kernel: pid 2372:initiator.c:rx_worker_proc_i:1335: ***ERROR*** rx_worker[0]: unexpected iSCSI op 0x32 Jul 3 18:13:13 genghis kernel: pid 2368:driver.c:iscsi_abort_handler:518: ***ERROR*** aborting SCSI cmd 0xc9a24a00 (op 0x12, tid 0, lun 0) Jul 3 18:13:13 genghis kernel: pid 2368:initiator.c:initiator_abort:775: ***ERROR*** aborting iSCSI cmd 0xc80d89a0 (type 1, isid 0) Jul 3 18:13:13 genghis kernel: pid 2368:driver.c:iscsi_done:276: ***ERROR*** SCSI cmd 0x12 failed at iSCSI level (ignoring) Jul 3 18:13:13 genghis kernel: pid 2368:initiator.c:initiator_abort:809: ***ERROR*** successfully aborted iSCSI cmd 0xc80d89a0 (type 1, isid 0) Jul 3 18:13:13 genghis kernel: pid 2368:driver.c:iscsi_abort_handler:574: ***ERROR*** aborting outside interrupt (gracefully ending Tx and Rx) Jul 3 18:13:13 genghis kernel: pid 2368:driver.c:iscsi_abort_handler:591: ***ERROR*** successfully aborted SCSI cmd 0xc9a24a00 (op 0x12, tid 0, lun 0) Jul 3 18:13:13 genghis kernel:
Jul 3 18:13:13 genghis kernel: * PARAMETERS NEGOTIATED * Jul 3 18:13:13 genghis kernel: * * Jul 3 18:13:13 genghis kernel: * InitiatorName: iqn.1986-03.com.int * Jul 3 18:13:13 genghis kernel: * InitiatorAlias: Intel * Jul 3 18:13:13 genghis kernel: * SessionType: Normal * Jul 3 18:13:13 genghis kernel: * TargetName: iqn.1992-08.com.net * Jul 3 18:13:13 genghis kernel:
Jul 3 18:13:13 genghis kernel:
Jul 3 18:13:13 genghis kernel: * PARAMETERS NEGOTIATED * Jul 3 18:13:13 genghis kernel: * * Jul 3 18:13:13 genghis kernel: * MaxRecvDataSegmentLength: 8192 * Jul 3 18:13:13 genghis kernel: * MaxConnections: 1 * Jul 3 18:13:13 genghis kernel: * InitialR2T: Yes * Jul 3 18:13:13 genghis kernel: * ImmediateData: Yes * Jul 3 18:13:13 genghis kernel: * HeaderDigest: None * Jul 3 18:13:13 genghis kernel: * DataDigest: None * Jul 3 18:13:13 genghis kernel: * MaxBurstLength: 262144 * Jul 3 18:13:13 genghis kernel: * FirstBurstLength: 65536 * Jul 3 18:13:13 genghis kernel: * DefaultTime2Wait: 0 * Jul 3 18:13:13 genghis kernel: * DefaultTime2Retain: 0 * Jul 3 18:13:13 genghis kernel: * MaxOutstandingR2T: 1 * Jul 3 18:13:13 genghis kernel: * DataPDUInOrder: Yes * Jul 3 18:13:13 genghis kernel: * DataSequenceInOrder: Yes * Jul 3 18:13:13 genghis kernel: * ErrorRecoveryLevel: 0 * Jul 3 18:13:13 genghis kernel:
Jul 3 18:13:13 genghis kernel:
Jul 3 18:13:13 genghis kernel: * LOGIN SUCCESSFUL * Jul 3 18:13:13 genghis kernel: * * Jul 3 18:13:13 genghis kernel: * CID: 0 * Jul 3 18:13:13 genghis kernel: * ISID: 0 * Jul 3 18:13:13 genghis kernel: * TSIH: 303 * Jul 3 18:13:13 genghis kernel: * CmdSN: 0 * Jul 3 18:13:13 genghis kernel: * MaxCmdSN: 63 * Jul 3 18:13:13 genghis kernel: * ExpStatSN: 1 * Jul 3 18:13:13 genghis kernel:
Jul 3 18:13:13 genghis kernel: pid 2374:initiator.c:rx_worker_proc_i:1335: ***ERROR*** rx_worker[0]: unexpected iSCSI op 0x32 Jul 3 18:13:23 genghis kernel: pid 2368:driver.c:iscsi_abort_handler:518: ***ERROR*** aborting SCSI cmd 0xc9a24a00 (op 0x0, tid 0, lun 0) Jul 3 18:13:23 genghis kernel: pid 2368:initiator.c:initiator_abort:775: ***ERROR*** aborting iSCSI cmd 0xc80d89a0 (type 1, isid 0) Jul 3 18:13:23 genghis kernel: pid 2368:driver.c:iscsi_done:276: ***ERROR*** SCSI cmd 0x0 failed at iSCSI level (ignoring) Jul 3 18:13:23 genghis kernel: pid 2368:initiator.c:initiator_abort:809: ***ERROR*** successfully aborted iSCSI cmd 0xc80d89a0 (type 1, isid 0) Jul 3 18:13:23 genghis kernel: pid 2368:driver.c:iscsi_abort_handler:574: ***ERROR*** aborting outside interrupt (gracefully ending Tx and Rx) Jul 3 18:13:23 genghis kernel: pid 2368:driver.c:iscsi_abort_handler:591: ***ERROR*** successfully aborted SCSI cmd 0xc9a24a00 (op 0x0, tid 0, lun 0) Jul 3 18:13:23 genghis kernel: pid 2368:driver.c:iscsi_device_reset_handler:596: ***ERROR***
Jul 3 18:13:23 genghis kernel: pid 2368:driver.c:iscsi_device_reset_handler:597: ***ERROR*** *** DEVICE 0 RESET *** Jul 3 18:13:23 genghis kernel: pid 2368:driver.c:iscsi_device_reset_handler:598: ***ERROR***
Jul 3 18:13:23 genghis kernel:
Jul 3 18:13:23 genghis kernel: * PARAMETERS NEGOTIATED * ... ... ... Jul 3 18:13:24 genghis kernel:
Jul 3 18:13:24 genghis kernel: pid 2376:initiator.c:rx_worker_proc_i:1335: ***ERROR*** rx_worker[0]: unexpected iSCSI op 0x32 Jul 3 18:13:33 genghis kernel: pid 2368:driver.c:iscsi_abort_handler:518: ***ERROR*** aborting SCSI cmd 0xc9a24a00 (op 0x0, tid 0, lun 0) Jul 3 18:13:33 genghis kernel: pid 2368:initiator.c:initiator_abort:775: ***ERROR*** aborting iSCSI cmd 0xc80d89a0 (type 1, isid 0) Jul 3 18:13:33 genghis kernel: pid 2368:driver.c:iscsi_done:276: ***ERROR*** SCSI cmd 0x0 failed at iSCSI level (ignoring) Jul 3 18:13:33 genghis kernel: pid 2368:initiator.c:initiator_abort:809: ***ERROR*** successfully aborted iSCSI cmd 0xc80d89a0 (type 1, isid 0) Jul 3 18:13:33 genghis kernel: pid 2368:driver.c:iscsi_abort_handler:574: ***ERROR*** aborting outside interrupt (gracefully ending Tx and Rx) Jul 3 18:13:33 genghis kernel: pid 2368:driver.c:iscsi_abort_handler:591: ***ERROR*** successfully aborted SCSI cmd 0xc9a24a00 (op 0x0, tid 0, lun 0) Jul 3 18:13:33 genghis kernel: pid 2368:driver.c:iscsi_bus_reset_handler:604: ***ERROR***
Jul 3 18:13:33 genghis kernel: pid 2368:driver.c:iscsi_bus_reset_handler:605: ***ERROR*** *** BUS 0 RESET
Jul 3 18:13:33 genghis kernel: pid 2368:driver.c:iscsi_bus_reset_handler:606: ***ERROR***
Jul 3 18:13:38 genghis kernel:
Jul 3 18:13:38 genghis kernel: * PARAMETERS NEGOTIATED * ... ... ... Jul 3 18:13:38 genghis kernel:
Jul 3 18:13:39 genghis kernel: pid 2378:initiator.c:rx_worker_proc_i:1335: ***ERROR*** rx_worker[0]: unexpected iSCSI op 0x32 Jul 3 18:13:48 genghis kernel: pid 2368:driver.c:iscsi_abort_handler:518: ***ERROR*** aborting SCSI cmd 0xc9a24a00 (op 0x0, tid 0, lun 0) Jul 3 18:13:48 genghis kernel: pid 2368:initiator.c:initiator_abort:775: ***ERROR*** aborting iSCSI cmd 0xc80d89a0 (type 1, isid 0) Jul 3 18:13:48 genghis kernel: pid 2368:driver.c:iscsi_done:276: ***ERROR*** SCSI cmd 0x0 failed at iSCSI level (ignoring) Jul 3 18:13:48 genghis kernel: pid 2368:initiator.c:initiator_abort:809: ***ERROR*** successfully aborted iSCSI cmd 0xc80d89a0 (type 1, isid 0) Jul 3 18:13:48 genghis kernel: pid 2368:driver.c:iscsi_abort_handler:574: ***ERROR*** aborting outside interrupt (gracefully ending Tx and Rx) Jul 3 18:13:48 genghis kernel: pid 2368:driver.c:iscsi_abort_handler:591: ***ERROR*** successfully aborted SCSI cmd 0xc9a24a00 (op 0x0, tid 0, lun 0) Jul 3 18:13:48 genghis kernel: scsi: device set offline - not ready or command retry failed after bus reset: host 0 channel 0 id 0 lun 0
Anybody know about a known issue related to this ?
my conf : netapp sim ver : NetApp Release 6.4R1 linux sim: Thu Mar 13 23:56:30 PST 2003
<L>
my linux box : genghis:/win7/Program Files/Kazaa/My Shared Folder# uname -a Linux genghis 2.4.16 #5 lun mai 5 17:32:59 CEST 2003 i686 Pentium III (Coppermine) GenuineIntel GNU/Linux
last iscsi drivers from intel : IntelLabs-v18-011603
note i correctly add the initiator in the filer iscsi group, i don't think i made a configuration mistake (i make it run under windoz) but perhaps ... <smile>
fanku much in advance. bye
Steve Evans wrote:
Okay. I guess it's time to fire up the simulator.
Steve Evans SDSU Foundation (619) 594-0653
-----Original Message----- From: Reinoud Reynders [mailto:Reinoud.Reynders@uz.kuleuven.ac.be] Sent: Thursday, July 03, 2003 12:18 PM To: Steve Evans; toasters@mathworks.com Subject: RE: iSCSI on Windows
For the microsoft initiator, you need 6.4.1 on the filers.
Reinoud
-----Oorspronkelijk bericht----- Van: Steve Evans [mailto:sevans@foundation.sdsu.edu] Verzonden: do 7/3/2003 7:16 PM Aan: toasters@mathworks.com CC: Onderwerp: iSCSI on Windows
I'm trying to set up an iSCSI connection between a Windows 2000 Server box and my NetApp Filer. I have the document Microsoft iSCSI Software Initiator HOWTO.
I'm on step 4.3 - Adding a target
When I try to add the Filer as a Target Portal on the Windows box it returns the error "Unsupported Version." Similar message on the Filer console.
Any ideas anyone? I was going to call NetApp but I'm not feeling well today and would prefer to stay off the phone.
Steve Evans SDSU Foundation (619) 594-0653