Yes, it's called 'pktt'. The command is hidden, but you don't need to change the priv level, it will work from admin mode. The output from pktt is tcpdump format.
-- Adam Fox adamfox@netapp.com
________________________________
From: Pazder, Steve B [mailto:Steve.B.Pazder@dynegy.com] Sent: Tuesday, April 24, 2007 12:38 PM To: toasters@mathworks.com Subject: network troubleshooting
Hello World!
Our Network admin has been working with Cisco to troubleshoot some issues (limited to 1 switch on 1 particular floor). While our Filers are not involved in this issue, fingers are generally pointed in that direction just because they exist....on the network. Our network admin is looking for information from the Filers that would be akin to a TCP dump. Ifstat, netstat and statit output are not providing the information being looked for (handshake info, etc). I haven't run across this particular issue before and don't recall ever seeing it presented to Toasters. Does anyone know of a way to get the actual communication dumps (again, a TCP dump) from a Filer?
Thanks!
Steve