Yes, Nate. It will prefer the 36GB drive over the 144GB drive. OnTap has a sense for how big a drive is and selects the closest sized drive for spares. ;)
Thanks, John.
-----Original Message----- From: Nathan Patwardhan [mailto:nvp@akamai.com] Sent: Wednesday, April 05, 2006 10:50 PM To: Tim McCarthy Cc: toasters@mathworks.com Subject: Re: OnTap 6.x, mixed shelves, and spares.
On Wed, Apr 05, 2006 at 09:56:32PM -0400, Tim McCarthy wrote: : ontap will only ever use a disk that is at lest as big as the failed : disk. In other words, ontap may: : grab a 144 to replace a 36
Alrighty. But if I load the FC9s with an ample number of 36g drives, would OnTap more likely than not pull from the FC9 before the DS14?
: Also, since you have FC9 shelves, you may have 36GB Zoned checksum : disks. If they are, then you can replace them with either zoned or block : checksum disks. However, at the 36GB capacity, zoned disks are 34.5G
I think ours show as 34g.
Thanks for your response!
-- Nathan Patwardhan, UNIX System[s] Administrator, Sr. Akamai Technologies, 839B/8CC x 83035 npatward@akamai.com AIM: notoriousnvp71