Hi Bazza
You also need to make a new SnapMirror relationship for that reverse direction first:
Something like Snapmirror create -source-path <cluster2 vol> -destination-path <cluster1 vol>
But yes correct no full transfer required just the latest common snapshot
Graham
On 13 Aug 2016, at 5:59 AM, BERNTSEN Basil basil.berntsen-ext@socgen.com wrote:
Hi folks,
If I have volume A on cluster 1 snapmirrored to volume B on cluster 2 and I do the following:
· Break the snapmirror relationship · Resync the snapmirror from cluster 1 using the -source-path of cluster 2 volume B (backward from what I just broke)
What should happen is that volume B on cluster 2 is now RW, volume A on cluster 1 is DP (read only), and no full sync is done over the replication network, right? That's how it worked in 7-mode, but I haven't done this in CDOT yet.
Thanks!
Basil
This message and any attachments (the "message") are confidential, intended solely for the addressee(s), and may contain legally privileged information. Any unauthorized use or dissemination is prohibited. E-mails are susceptible to alteration. Neither SOCIETE GENERALE nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified. Please visit http://sgasdisclosure.com for important information regarding SG Americas Securities, LLC (“SGAS”). Please visit http://swapdisclosure.sgcib.com for important information regarding swap transactions with SOCIETE GENERALE.
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters