Can someone tell me how to remove an address from this mailing list. One of our contractors has subscribed and we want to remove him.
Thanks
-----Original Message----- From: Michael J. Carter [mailto:mcarter@lanl.gov] Sent: 26 February 2003 15:09 To: Chris Blackmor Cc: Stephane Bentebba; Geoff Hardin; toasters@mathworks.com Subject: Re: F720 firmware issue
Also make sure the floppy isn't in the drive when you boot the filer. The firmware floppy isn't a bootable image.
mjc
On Wed, 2003-02-26 at 07:12, Chris Blackmor wrote:
Geoff, I had a similar problem when I created the floppy from a unix system. Did you create it on a PC formatted floppy. If not, it won't work. C-
On Wed, Feb 26, 2003 at 01:07:27PM +0100, Stephane Bentebba wrote:
Geoff Hardin wrote:
I have an F720 that was running OnTAP 5.2.x and I upgraded it to OnTAP 6.1. Unfortunately (and there are a couple of these), I forgot to
update
the motherboard firmware first. Normally not a big deal, except this
F720
happens to be in the Phillipines and I'm in Dallas, a 14 hour time difference.
Luckily enough, the F720 boots up, but it complains that the firmware
is
too old and that I should upgrade to 2.3. The latest firmware
available
is 2.8, but when we tried to update the firmware, we got an error after the program started running: The attempt to load a boot image failed.
It
then drops back to the ok prompt and the firmware is not updated.
Does anyone know if I have to first update the firmware to 2.3 and then
to
2.8? It's been a long time since I have had to do this operation, and
I
don't think it ever covered such a span of versions.
Thanks,
Geoff Hardin geoff.hardin@dalsemi.com This space is for rent in order to increase company revenue.
i guess the data on your floppy was not cleanly written . either your floppy is defectuous, either the image you downloaded was corrupted
try to download the firmware again and use another floppy . and touch some wood