13 Sep
2001
13 Sep
'01
7:44 a.m.
first you have to enable access to the binaries:
priv set diag Warning: These diagnostic commands are for use by Network Appliance personnel only. !dont play around with the commands in produktive systems!
there you will find the spares_zero .... this will zero your unzeroed spares
Be Careful: dont CRTL+C this command, or u will get an panic and the filer reboots.
Uros Lampret wrote:
I have some hot spare disks that were part of volume I destroyed. When I add disk to new wolume zeroing is started and it takes some time. I would like to zero disks on my time, but can't find the command.
Uros
--
-------------------------------------------------------------------
Hannes Herret IT-Service / Storage
phone : +43 (1) 60 126-34 Bacher Systems EDV GmbH
fax : +43 (1) 60 126-555 Wienerbergstr. 11B
mailto:hh@bacher.at A-1101 Wien, Austria
www : http://www.bacher.at/ Europe