Have you tried backup using standard backup methods (over NFS)?
On 6/19/07, Page, Jeremy jeremy.page@gilbarco.com wrote:
We are backing up a 270c nightly with Netbackup via NDMP to a dual drive LTO3 machine (only one drive is used for to backup the filer). There are 2.25 TB on one head and 1.1TB on the other. For a full backup it takes about 10 hours to write to tape, which I don't think is too bad (larger volumes hit 31200 KB/sec reported by Netbackup), but the differentials take 5 hours to run,even though the delta on our data is very small.
I suspect this is more of a Netbackup issue then a filer based one but wanted to throw it out there incase there was something I should look at on the host side. This is over a normal gigE switched network connection with the default settings on the filer, network-wise. We are not using virtual interfaces, both heads have a single 1 gig connection to the LAN. Any suggestions or inventive flames are welcome.
This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately.