What does df -g -s show?
That will show you actual size - not just the de-duped size...
________________________________
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Page, Jeremy Sent: Wednesday, October 22, 2008 7:49 AM To: toasters@mathworks.com Subject: Quick question about ASIS
So here's what my filer looks like:
gvr-array02*> sis status
Path State Status Progress
/vol/nfs2 Enabled Active 2318 GB Searched
/vol/nfs3 Enabled Active 3648 GB Searched
/vol/nfs4 Enabled Idle Idle for 143:01:40
/vol/nfs6 Enabled Idle Idle for 05:27:23
/vol/nfs7 Enabled Active 28 GB (11%) Done
/vol/shares Enabled Idle Idle for 82:53:20
/vol/vmware Enabled Idle Idle for 47:04:42
The weird thing is none of my NFS volumes are more then a TB in size, is it looking through the whole aggr? If so, why does the job run on a per volume level?
Please be advised that this email may be a confidential communication and may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by e-mail by replying to the sender and by telephone (call us collect at 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance.
In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement; provided, that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email.