If you need the vFilers to be on different networks then you'll need to create both VLAN tags and separate IPSpaces. If there isn't a needed for a separate network, then you can just use IP aliases.
Regards, André M. Clark | Sr. Consulting Engineer, Team Lead | Insight Integrated Systems | 917.388.8236 Tell me I will forget... Show me I may remember... Involve me I WILL UNDERSTAND!!! Start by doing what's necessary, then what's possible, and suddenly you are doing the impossible!!!
-----Original Message----- From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Paul Letta Sent: Thursday, October 25, 2012 16:13 To: toasters Subject: vFiler with vlan tagging?
Hello,
I'm trying to deploy multiple vFilers on a single filer. The vFilers need to be on different vlans. I want to use the same VIF (made up of 2 interfaces) for this. Am I wrong in my thinking that I can use vlan tagging with these multiple vfilers while using the same vif?
I think I should be able to use the default IPspace on the vif.
I've had our network people trunk 2 vlans to the ports that make up the VIF. I then create 2 vFilers, each specifying its own IP address/subnet mask. (The IPs and masks are different for each vfiler).
But what I'm missing is the connection between vfiler and vlan.
With ESX, we trunk dozens of vlans to the nics that the esx server is using for the vswitch. We then configure the vm's to be on which ever vlan we need it to be. Of course that's ESX's virtual switch doing the work for me.
How does this picture map into vfiler / physical filer space?
Thanks, Paul
_______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters