It takes a little time for that free space to show up. Additionally, depending on your release of ONTAP, a better tool for checking space is 'aggr show_space'
-----Original Message----- From: Kevin Parker [mailto:KParker@nwnit.com] Sent: Friday, February 15, 2008 8:24 AM To: toasters@mathworks.com Subject: Lun destroy does not free up vol free space
Toasters: Vol size is 1024GB. It had 4 vmware type luns of 240gb each taking the vol to 100% used.
Now need to SIS the volumes so can't do 100% used. Lun offline/destroy 1 lun (didnt need it) and expected to see free space in volume show up. However after 2 minutes it DID go to 70%, but now back to 100% used still. No vol or aggr snapshots exist. Sis enabled still but failing due to being full. May try to turn it off to see if it will unjar the free block space.
Any ideas why lun destroy wouldn't provide more free space from a df? I'm sure I'm missing something amazingly simple. 3020C@7.2.3 TIA! **Sent using wireless handheld... please excuse any typo's or brevity** Kevin Parker - NWN Corporation kparker@nwnit.com (m) 919.830.5819 (o) 919.653.4489
Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately.