This is not a memory error on and F630. For an F630, an MCHK 98 means "Processor Hard Error". It is a SW problem associated with SNMP. Access NOW and check out bug 11610.
David Bulfer -----Original Message----- From: G D Geen [mailto:geen@msp.sc.ti.com] Sent: Wednesday, March 03, 1999 1:46 PM To: 'toasters@mathworks.com' Cc: Peter Pross; Mike Ball Subject: Re: UNCORR PROC MCHK 98
We were told that this was a memory issue as well. This was not so in our case. Ours occurred when a network device discovery was run from the Spectrum server. This did not affect the system running version below 5.1.1.
If you are running some sort of network monitoring tools such as Cabletron's Spectrum server, the SNMP call made by the discovery may be causing your problem as it did ours. NetApp took ownership of this issue and created a patch to fix our problem. Though this problem had been reported by other vendors, Cabletron does not consider it a bug in *their* code.
-gdg
Peter Pross wrote:
Hi,
I believe this may be memory errors. I think you aloud 1 in a blue moon, if more replace mem. Check with netapps.
Cheers,
Peter
__^__ ( ___)---------------------------------------------------------------------------
| / | Peter Pross Title: Unix SystemsAdministrator | / | Nortel Networks Montreal Email: pross@nortel.ca | / | 16 Place du Commerce Voice: 514-765-7973 | / | Nun's Island, Quebec, Fax : 514-761-8710
| / | Canada H3E 1H6 ESN : 852-7973 |___|(_____)---------------------------------------------------------------------
-----Original Message----- From: Mike Ball [SMTP:mball@rtp.opensystems.com] Sent: March 3, 1999 2:06 PM To: 'toasters@mathworks.com' Subject: UNCORR PROC MCHK 98
Does anyone have an idea of what the below error is pointing to on my F630 running 5.21?
"Wed Mar 3 09:26:49 EST [rc]: relog syslog UNCORR PROC MCHK 98 pc:fffffc0000482260 cia:0 mm:4090 eia:1820f550 fs:ff00 eis:945000000 isr: 0 pci0:3010106 pci1:4000"
I discovered my system was locked up this morning when I came in. After rebooting i discovered the following error in my messages file.