Hi Peter,
How's everything down Wollongong way?
Thanswer to your question is yes, bearing in mind that the F720 won't [officially] support as much storage as an F740. They both run alphas so you don't even need to reload OnTap. You must halt the filer properly to make sure NVRAM is flushed. Then power down, swap the heads and boot it up.
To go to in Intel based filer head (800 series) you would need to run through the regular OnTap upgrade procedure, including the "download" console instruction, with an Intel version of OnTap first. Then simply halt, power down and swap the heads just as you would normally.
regards,
Alan.
-----Original Message----- From: Peter D. Gray [mailto:pdg@uow.edu.au] Sent: Wednesday, 5 March 2003 9:14 AM To: toasters@mathworks.com Subject: swapping heads
Does anybody know if it safe to simply swap heads between a F720 and a F740 filer?
Since the OS and configuration is on the disks I assume this will work ok as long as the OS and/or configuration is not specific to either of these 2 models?
Regards, pdg
--
See mail headers for contact information.
**** ASI Solutions Disclaimer **** The material transmitted may contain confidential and/or privileged material and is intended only for the addressee. If you receive this in error, please notify the sender and destroy any copies of the material immediately. ASI will protect your Privacy according to the 10 Privacy Principles outlined under the new Privacy Act, Dec 2001.
This email is also subject to copyright. Any use of or reliance upon this material by persons or entities other than the addressee is prohibited.
E-mails may be interfered with, may contain computer viruses or other defects. Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments. **** END OF MESSAGE ****