Cloud volumes ontap Physical disk
:)
Looking to see if any MB/sec on writes to sata physical disk backends have been touched.
Hearing that there may be (in some clouds) a write throughout barrier that CVO may run into.
On Fri, Aug 5, 2022 at 13:46 Scott Miller scott.miller@dreamworks.com wrote:
CVO == Cloud Volumes Ontap, the software version of OnTap that you can run in the various CSP's (Cloud Service Providers) aka GCP, AWS, Azure
https://cloud.netapp.com/ontap-cloud https://urldefense.com/v3/__https://cloud.netapp.com/ontap-cloud__;!!Op6eflyXZCqGR5I!Alqj9mIGNgheNL-OIGe0v4vw5faKBaoHGvf6rlLhXJ3GxqKvAiqlPhxgDV21YF6zaUnJeOh-AVk1Pg94z79Mp8b1lw$
PD == Persistent Disk, what GCP (Google Compute Platform) calls its, uh, persistent disks.
https://cloud.google.com/compute/docs/disks https://urldefense.com/v3/__https://cloud.google.com/compute/docs/disks__;!!Op6eflyXZCqGR5I!Alqj9mIGNgheNL-OIGe0v4vw5faKBaoHGvf6rlLhXJ3GxqKvAiqlPhxgDV21YF6zaUnJeOh-AVk1Pg94z790Xq9hyA$
And to answer Jeffs question, we've not done any CVO testing in GCP, so I can't answer the throughput questions.
We have found that, in general, the VM Instance type that hosts the CVO instances matters, since the Instance type also determines networking connectivity.
Disk type (in this case GCP PDs) matters, too; I'd test with Local SSD to see where that gets you.
Lastly, Throughput is dependent on workload, which determines the IO pattern. Maybe create an FIO config that generates traffic close to what you expect, and use that to drive various CVO configurations.
https://github.com/axboe/fio https://urldefense.com/v3/__https://github.com/axboe/fio__;!!Op6eflyXZCqGR5I!Alqj9mIGNgheNL-OIGe0v4vw5faKBaoHGvf6rlLhXJ3GxqKvAiqlPhxgDV21YF6zaUnJeOh-AVk1Pg94z7_9oTAI2Q$
-Skottie
On Fri, Aug 5, 2022 at 1:26 PM John Stoffel john@stoffel.org wrote:
> "Jeff" == Jeff Mohler via Toasters toasters@teaparty.net writes:
Jeff> From: Jeff Mohler jmohler@yahooinc.com Jeff> To: Toasters toasters@teaparty.net Jeff> Date: Fri, 5 Aug 2022 10:15:13 -0700 Jeff> Subject: CVO on Standard/SATA PD
Jeff> Does anyone here have experience on a standard PD layer using CVO?
Jeff, I know you're deep in the weeds, but for those of us who aren't... can you spell out those acronyms please?
PD = Purple Dinosaur? CVO = Cheery Victory Orange?
*grin*
Jeff> If so, I am looking for -throughput- maximus, limitations, Jeff> lessons learned, on per volume write workloads.
Jeff> We are in a mode where we believe we were told there are Jeff> 100-200MB/sec write "edges" of throughput to CVO on standard PD Jeff> storage...just we're not quite in shape here to test that yet Jeff> ourselves.
Yeah, you need to translate this section as well please. Or at least give a little more context so people have a hope of understanding. Or better yet, learning from your experiences!
Cheers, John
Toasters mailing list Toasters@teaparty.net https://www.teaparty.net/mailman/listinfo/toasters https://urldefense.com/v3/__https://www.teaparty.net/mailman/listinfo/toasters__;!!Op6eflyXZCqGR5I!Alqj9mIGNgheNL-OIGe0v4vw5faKBaoHGvf6rlLhXJ3GxqKvAiqlPhxgDV21YF6zaUnJeOh-AVk1Pg94z79DFGd7dw$
--
If it were me flying, Goose would be alive today.