Apologies, you’re correct :) I was in advanced, not diag!
~Mark
mark.flint@sanger.ac.uk Principal Systems Administrator IMT Storage & Backups
On 1 Jul 2015, at 11:30, Sebastian Goetze spgoetze@gmail.com wrote:
Well, in 'diag' (and 8.3RC1) it works: c83-PC::> set dia Warning: These diagnostic commands are for use by NetApp personnel only. Do you want to continue? {y|n}: y c83-PC::*> stat set mod ? (statistics settings modify) [[-display-rates] {true|false}] *Display Rates [ -client-stats {enabled|disabled} ] *Collect Per-Client Statistics [ -max-clients-to-view {1..10240} ] *Specify the Max Number of Clients to View [ -max-clients-to-collect {1..10240} ] *Specify the Max Number of Clients to Collect [ -counter-display {Counter Display full|non-zero|none|all} ] *Counter Display Value [ -counter-display-units {Counter Units B|KB|MB|GB} ] *Counter Display Units [ -display-count-exponent {0..10} ] *Display Count Exponent
Sebastian
On 7/1/2015 12:25 PM, Mark Flint wrote:
cluster1::*> statistics settings modify -client-stats enabled
Error: invalid argument "-client-stats"
cluster1::*> statistics settings modify ? [-display-rates] {true|false} Display Rates
Yes, thanks Sebastian :)
~Mark
mark.flint@sanger.ac.uk Principal Systems Administrator IMT Storage & Backups
On 1 Jul 2015, at 11:23, Sebastian Goetze spgoetze@gmail.com wrote:
Hi Mark,
did you notice the star at the prompt? "cluster::*> statistics settings modify -client-stats enabled"
That means, he was in "advanced" or "diag" mode, when he typed the command... (As far as I can tell, he doesn't mention which one, but he changes the priviledge level in previous chapters, e.g. when discussing 'secd') I don't have a 8.2P6 system at hand to verify, but I'm pretty sure the command will work if you go to advanced or diag mode...
HTH
Sebastian
On 7/1/2015 12:04 PM, Mark Flint wrote:
Think this may be a version specific issue, but I’m trying to get client stats out of an 8.2P6 CDOT system, preferably sorted so that I can see the top few clients. I’ve found the above TR by Justin (thanks :) ) but one of the useful commands seems not to work. I’m using “statistics settings modify -client-stats enabled”
and it returns a not found, only reference is that the statistics setting modify command can only change the counter display rate :( Must be a way to do this, or do I have to try and write something?
Got a bit of help from Douglas’ comments here yesterday, but still struggling….
~Mark
mark.flint@sanger.ac.uk
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters