toasters

toasters@lists.teaparty.net

2 participants
13522 discussions

RE: Qtree Utilization Alerts
by Joe Luchtenberg 13 Jun '01

13 Jun '01

On second read it sounds like I'm trying to sell you this utility. Sorry - hope it wasn't received as such. This utility is a free download on the NOW site. Joe -----Original Message----- From: Joe Luchtenberg Sent: Wednesday, June 13, 2001 8:30 AM To: 'Dale Wolf'; toasters(a)mathworks.com Subject: RE: Qtree Utilization Alerts Check out NOW. In the software downloads section there is a page for tools and utilities downloads where you can find one called Filer Quota Notifier (disk_usage), which has the following description: "This Perl script looks at user disk quotas and automatically sends email to users (or to the administrator) when their quotas are within some threshold of being exceeded. Use with Solaris and perhaps other versions of Unix." I'm not a filer admin, just an interested reseller, so I can't vouch for this utility personally. Perhaps one of the other folks on this list can tell you from their own experience. Officially it's recommended by NetApp but not supported by them. Joe Joe Luchtenberg Dataline, Inc. 757-858-0600 757-285-1223 (mobile) 757-858-0606 (fax) joe.luchtenberg(a)data-line.com www.data-line.com -----Original Message----- From: Dale Wolf [mailto:wolfd@agcs.com] Sent: Tuesday, June 12, 2001 7:29 PM To: toasters(a)mathworks.com Subject: Qtree Utilization Alerts I am looking for a tool to send alerts in the form of email or NT alerts when a Qtree reaches some threshold or percentage (say 80%) of it's quota. I want to be able to extract or construct the alert only for certain Qtrees. Our Qtree naming standard makes it simple to identify an NTFS Qtree. I've thought about automatically generating the Qtree report and writing a tool to parse the information out of the report and generate any alerts needed. Any tools or suggestions are welcome. Thanks.

1 0

RE: Qtree Utilization Alerts
by Joe Luchtenberg 13 Jun '01

13 Jun '01

Check out NOW. In the software downloads section there is a page for tools and utilities downloads where you can find one called Filer Quota Notifier (disk_usage), which has the following description: "This Perl script looks at user disk quotas and automatically sends email to users (or to the administrator) when their quotas are within some threshold of being exceeded. Use with Solaris and perhaps other versions of Unix." I'm not a filer admin, just an interested reseller, so I can't vouch for this utility personally. Perhaps one of the other folks on this list can tell you from their own experience. Officially it's recommended by NetApp but not supported by them. Joe Joe Luchtenberg Dataline, Inc. 757-858-0600 757-285-1223 (mobile) 757-858-0606 (fax) joe.luchtenberg(a)data-line.com www.data-line.com -----Original Message----- From: Dale Wolf [mailto:wolfd@agcs.com] Sent: Tuesday, June 12, 2001 7:29 PM To: toasters(a)mathworks.com Subject: Qtree Utilization Alerts I am looking for a tool to send alerts in the form of email or NT alerts when a Qtree reaches some threshold or percentage (say 80%) of it's quota. I want to be able to extract or construct the alert only for certain Qtrees. Our Qtree naming standard makes it simple to identify an NTFS Qtree. I've thought about automatically generating the Qtree report and writing a tool to parse the information out of the report and generate any alerts needed. Any tools or suggestions are welcome. Thanks.

1 0

cifs prefdc for 6.0.1R3 ??
by Hannes Herret 12 Jun '01

12 Jun '01

hi folks, is there someone, who knows a hidden option to set a preferance-list for DC connections for 6.0.1R3?? cause somtimes the filer connects to a dc over wan, and the latency isn´t that good to run oracle on the filer. in 6.1 its integrated and i think - maybe this option is also in older ontap-releases. any suggestions?? thx hannes

1 0

Re: Qtree Utilization Alerts
by Steven Boyer 12 Jun '01

12 Jun '01

Dale I wrote a script, on a Unix client, that looks at each tree in the /etc/quotas file. If the tree is within 90% of the three it then sends an email the user who is responsible for the tree, our helpdesk, and senior admins. The file that I email also includes the sub directories of that tree so the user can get an idea of were he might be able to cleanup data. My scripts run once an hour mon-fri. ---------- Original Message ---------------------------------- From: "Dale Wolf" <wolfd(a)agcs.com> Date: Tue, 12 Jun 2001 16:29:20 -0700 >I am looking for a tool to send alerts in the form of email or NT alerts >when a Qtree reaches some threshold or percentage (say 80%) of it's >quota. I want to be able to extract or construct the alert only for >certain Qtrees. Our Qtree naming standard makes it simple to identify >an NTFS Qtree. > >I've thought about automatically generating the Qtree report and writing >a tool to parse the information out of the report and generate any >alerts needed. > >Any tools or suggestions are welcome. > >Thanks. > > -- Steven N. Boyer UNIX/NT/NetApp Support HQUSCENTCOM General Dynamics --

1 0

RE: Sudden CIFS performance degradation
by Traitel, Eyal 12 Jun '01

12 Jun '01

Diana, Since this might be of many many reasons, some on filer side, some on client side, I suggest you to open a case. Eyal. ----------------------------------------------------------------- eTraitel - I'm the new eBuzzword around !!! Filer Escalation Engineer CNA, MCSE, CSA, LCA, NetApp CA Network Appliance BV Hoofddorp, The Netherlands Office: +31 23 567 9685 Cellular: +31 6 5497 2568 Get answers NOW! - NetApp On the Web - http://now.netapp.com ----------------------------------------------------------------- -----Original Message----- From: Dianna Mullet [mailto:drmullet@link.com] Sent: Thu, June 07, 2001 17:01 To: toasters(a)mathworks.com Subject: Sudden CIFS performance degradation We're running OnTap 5.3.6 on an F760, serving both NFS and CIFS. It ran fine since we upgraded to 5.3.6 around 10 months ago, until early this week, when we began experiencing severely degraded CIFS performance. In some cases, CIFS times out and the client experiences data loss. What should I be looking for? We had a similar problem with our other filer a few months ago, but never determined the cause; we ended up solving the problem by upgrading to OnTap 6. This time, I would like to determine the cause _before_ we upgrade, but time is of the essence. Help/tips appreciated. Thanks, Dianna

2 1

RE: showmount?
by Mohler, Jeff 12 Jun '01

12 Jun '01

The command 'exportfs' on the filer itself, will also display the currently exported volumes. -----Original Message----- From: Lance A. Brown [mailto:brown9@niehs.nih.gov] Sent: Tuesday, June 12, 2001 10:17 AM To: toasters(a)mathworks.com Subject: Re: showmount? Greetings, Paul Lupa <paul.lupa(a)motorola.com> kindly reminded that showmount -a filername from a UNIX host will display the information I am after. --[Lance]

3 3

Client Software
by John F. McLaughlin 12 Jun '01

12 Jun '01

We're running Netbackup 3.4 we're looking for client side software for the following OS's. SunOs 4.1.4 Solaris 2.3 & 2.4. Is there any where where we can download it from.

1 0

showmount?
by Lance A. Brown 12 Jun '01

12 Jun '01

Greetings, Is there any equivelant to the unix showmount command in OnTAP 5.3.X? I can't seem to find anything. --[Lance]

2 2

RE: showmount?
by Fox, Adam 12 Jun '01

12 Jun '01

> > Is there any equivelant to the unix showmount command in OnTAP 5.3.X? > I can't seem to find anything. > Not that I'm aware of, but you can look in /etc/rmtab on the filer for that same info. Or you can run showmount from a client and give the server name, such as UNIX# showmount -a filer BUT PLEASE NOTE THIS CAVEAT: There is no reliable way to tell who all your clients are at any given time. NFS is stateless. Clients can come and go and they don't always leave nicely and do a clean umount so the entries tend to stay in /etc/rmtab for much longer than they should. If you want to see who the top 5 or so clients are, you can always use the option nfs.per_client_stats and then nfsstat -l and you'll get an idea of who your busiest clients are and presumably they are still mounted. The only showmount option that I have found to be truly reliable is the -e options which shows you what is exported from a particular box. Hope this helps. -- Adam Fox NetApp Professional Services, NC adamfox(a)netapp.com

1 0

Seeing a bunch of these: Should I worry?
by Jaye Mathisen 11 Jun '01

11 Jun '01

Mon Jun 11 16:02:30 PDT [isp_main]: Disk 8b.6(0xfffffc0000bc6730): op 0x2a:003bf220:0010 sector 3928608 aborted command - Parity/CRC error (b 47, 0) Mon Jun 11 16:41:57 PDT [isp_main]: Disk 8b.1(0xfffffc0000bc94b0): op 0x2a:004ec9f8:0008 sector 5163512 aborted command - Parity/CRC error (b 47, 0) Mon Jun 11 16:57:57 PDT [isp_main]: Disk 8b.1(0xfffffc0000bc4030): op 0x2a:0057cce8:0008 sector 5754088 aborted command - Parity/CRC error (b 47, 0) Mon Jun 11 17:01:51 PDT [isp_main]: Disk 8b.4(0xfffffc0000bc34d0): op 0x2a:005a2980:0008 sector 5908864 aborted command - Parity/CRC error (b 47, 0) The constant (b 47, 0)...

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters