toasters

toasters@lists.teaparty.net

13515 discussions

software distribution with NDMPcopy/SnapMirror over WANs?
by Thaller Horst (MDCA Villach) 22 May '00

22 May '00

Who has experiences with software distribution/syncronisation over WANs with NDMPcopy or SnapMirror? We have a software pool at our master site, where we maintain our software (~ 500 GB) and then we distribute the changes to our client sites. Our actual rcp/ssh-based solution has several drawbacks: * No automatic syncronisation * Transfer of whole sw-packages only * Only Unix-packages supported (no NT packages) My idea is to do this job with NDMPcopy or SnapMirror, but I have a lot of questions: Can I export (ro) the mirrored volumes? (NDMP, SnapMirror) It´s possible to tunnel NDMP/SnapMirror with ssh? Can I mirror more than one site with SnapMirror? Cascaded distribution? Is there a commercial product? best regards, Horst Thaller Infineon Technologies Microelectronic Design Centers Austria GmbH Design Center Villach Siemensstrasse 2, A-9500 Villach Tel. ++43 4242 305-6212 Fax ++43 4242 305-6389 email: Horst.Thaller(a)infineon.com internet: www.infineon.com/ezmvi

1 0

RE: Problem in Saving CDE Settings
by jeff.mohler＠netapp.com 19 May '00

19 May '00

You sure..its in the copy of the manual I have handy here under "Introducing the /etc/exports/file" If its not in your version of the manual, I will open a documentation bug. -----Original Message----- From: Michael Galloway [mailto:mgx@ornl.gov] Sent: Friday, May 19, 2000 10:10 AM To: Jim Harm Cc: toasters(a)mathworks.com Subject: Re: Problem in Saving CDE Settings would be nice if netapp documented this somewhere. it's not in the man pages that came with my new 760/OT5.3.5R2. what is the syntax for configuring root access using subnets? is it the same as rw access: /home -rw=123.456.789.0/24,root=123.456.789.0/24 -- michael Hi Jim! On Fri, 19 May 2000, Jim Harm wrote: > Months ago, NetApp added a capability to use subnets > to define root access(I think it was even in version 4.3.4R3). > Not as flexible as netgroup, but an acceptable alternative that they > informed us has much better performance. > The netgroups can be scanned for mount priviledge, but writes could be slowed > down by that kind of scan every time. The subnet check was quicker. >

3 2

Wiping and setting up a system.
by Shaun Erickson 19 May '00

19 May '00

I would like to destroy all volumes on an F330 (with four shelves, fully populated with 4Gb disks), and then create a single new root volume and install 5.3.5R2 (which *does* run on an F330). I'm sure I can destroy the existing volumes (I'm good at destroying things), but it's not clear to me how to then install Ontap onto bare metal (I've only ever upgraded a filer before). Is there a simple recipe for doing this? TIA, -ste -- Desk: (908) 582-7629 Pager: (800) 756-1133 Cell: (908) 672-6456

3 2

Re: Wiping and setting up a system. (fwd)
by Stephen C. Woods 19 May '00

19 May '00

> > > Is there a simple recipe for doing this? > > Just pop in a floppy and boot from it, then refer to the menu. > Just so you're ready, if your drives don't support zeroing via a SCSI/FCAL command this can take a quite while <grin>. But actually it's quite painless. ----- Stephen C. Woods; UCLA SEASnet; 2567 Boelter hall; LA CA 90095; (310)-825-8614 Finger for public key scw(a)cirrus.seas.ucla.edu,Internet mail:scw@SEAS.UCLA.EDU

1 0

RE: Wiping and setting up a system.
by jeff.mohler＠netapp.com 19 May '00

19 May '00

Neato quickie way. Get to an OK prompt (via halt or Ctrl_C in RAM count) Enter: setenv floppy-boot? true reboot It will as if you want to floppy boot when it locates drives..enter a y or an n..if you dont..it'll just sit there forever.*** You get your 5 item menu, enter on re-init drives choice. At completion, it will walk thru a full setup session like new. Now halt filer. Enter: unsetenv floppy-boot?*** (dont forget..or reboots will sit forever if you dont catch it) reboot All done. Save you what feels like ages in booting from floppy. (This only works if you have good boot images on disks to begin with) -----Original Message----- From: Bruce Sterling Woodcock [mailto:sirbruce@ix.netcom.com] Sent: Friday, May 19, 2000 1:18 PM To: ste(a)research.bell-labs.com; toasters(a)mathworks.com Subject: Re: Wiping and setting up a system. > Is there a simple recipe for doing this? Just pop in a floppy and boot from it, then refer to the menu. Bruce

1 0

Pushing the limits
by Jeff Stampes 19 May '00

19 May '00

So we use a F760 for compiling our software....it's a demanding environment, and up until now, NetApp systems have been adequate for us As I've been refining our build process though, I've continuing optimizing it to the point the 760 may become our bottleneck. It seems to be running at about 50-60% of CPU most of the time, with peaks like: CPU NFS CIFS HTTP Net kB/s Disk kB/s Tape kB/s Cache in out read write read write age 98% 4243 6 0 6365 7367 10648 15352 0 0 3 74% 4515 1 0 11902 8348 3592 44 0 0 3 100% 4644 2 0 9472 11021 7763 8088 0 0 3 88% 4307 0 0 9223 9463 7023 10938 0 0 3 100% 5606 0 0 8870 9185 6048 11368 0 0 3 75% 4884 4 0 8622 13913 4032 2432 0 0 3 100% 5717 6 0 6777 10372 6700 11488 0 0 3 I don't knwo when I need to worry....so I have two questions: What stats will cue me into a problem related to overload? What are the limits of CPU/Net/Disk use I should stay under? Provided I find a way to drive an F760 into the ground, any suggestions for a next step? -- Jeff Stampes -- Xilinx, Inc. -- Boulder, CO -- jeff.stampes(a)xilinx.com

4 4

Re: Problem in Saving CDE Settings
by Graydon Dodson 19 May '00

19 May '00

>Does anyone else get the impression that NetApp are a bit stuck in the >past in the area of export specifications? The subnets are a welcome >addition, but current versions of Solaris (for example) support much >more. Including, incidentally, use of netgroups in -root. I have been asking netapp to suport netgroups on both -rw & -ro options on the same export for years now. Thanks. Graydon Dodson grdodson(a)lexmark.com Lexmark International Inc.

1 0

RE: Problem in Saving CDE Settings
by Thaller Horst (MDCA Villach) 19 May '00

19 May '00

The "root"-option is more secure, but this setting has one big drawback: You cannot use netgroup names with the -root option and you can specify only 256 host names! If you have only few machines, the -root option is the better choice. In large server farms with more than 256 machines that are running CDE+dtlogin (XDMCP) the -root option will not work. Horst -----Original Message----- From: Bruce Sterling Woodcock [mailto:sirbruce@ix.netcom.com] Sent: Freitag, 19. Mai 2000 16:00 To: Thaller Horst (MDCA Villach); bhaskar.g(a)philips.com; toasters(a)mathworks.com Subject: Re: Problem in Saving CDE Settings > I think it´s a problem with the permissions on your home directory. The > dtlogin process (CDE) reads and writes configuration files in the > homedirectory (~/.dtlogin/..). The owner of the process is root --> But root > has not permissions on mounted directories! > > Try out to export your homedirecties with the "anon=0"-flag in /etc/exports > -or- > you should open your homedirectories for everybody (chmod 777 homedir) :-(( > to avoid this problem. Yikes! Both are very insecure choices for a solution!!! The correct answer is to simply export the home directories with root access for those machines that are running CDE that they are logging in through. Bruce

6 5

SQL Server 7 with data files on toaster?
by Colm Buckley 19 May '00

19 May '00

Hi - Another request for success or horror stories; does anyone on the list have experience with running MS SQL Server 7 using a toaster to store the data (as described in http://www.netapp.com/tech_library/3042.html and http://www.netapp.com/tech_library/3044.html)? One possibility being looked at here is to run a database from something like a Dell PowerEdge 8450 with the data files on an F720 or F740. I'm aware of the advantages the toaster will bring in relation to backup, snapshots etc, but I'm interested in how the performance of such a setup would compare to, say, attaching a big LVD or Fibre RAID5 directly to the server. Any comments? Colm -- Colm Buckley BA BF | NewWorld Commerce, 44 Westland Row, Dublin 2, Ireland colm(a)tuatha.org (personal) | colm.buckley(a)nwcgroup.com (business) +353 87 2469146 | whois cb3765 | http://www.tuatha.org/~colm/ No, my powers can only be used for good.

1 0

RE: Problem in Saving CDE Settings
by Thaller Horst (MDCA Villach) 19 May '00

19 May '00

Hello *, I think it´s a problem with the permissions on your home directory. The dtlogin process (CDE) reads and writes configuration files in the homedirectory (~/.dtlogin/..). The owner of the process is root --> But root has not permissions on mounted directories! Try out to export your homedirecties with the "anon=0"-flag in /etc/exports -or- you should open your homedirectories for everybody (chmod 777 homedir) :-(( to avoid this problem. Regards, Horst Thaller Infineon Technologies Microelectronic Design Centers Austria GmbH Design Center Villach Siemensstrasse 2, A-9500 Villach Tel. ++43 4242 305-6212 Fax ++43 4242 305-6389 email: Horst.Thaller(a)infineon.com internet: www.infineon.com/ezmvi -----Original Message----- From: bhaskar.g(a)philips.com [mailto:bhaskar.g@philips.com] Sent: Freitag, 19. Mai 2000 05:54 To: toasters(a)mathworks.com Subject: Problem in Saving CDE Settings Hi, Recently we have moved the home directories of the Users' on to the filer. We started facing problem of saving the CDE Settings. If any user changes his desktop settings and logouts and logs in the previous settings will not be saved. This never happened when the users' home directories were on an HPUX Server. kind regards Bhaskar G Philips Semiconductors, #3, Sterling Square,Madras Bank Road, Off St Mark's Road,BANGALORE-560 001. Voice : +91 80 222 9200 Ext 5060 Fax: +91 80 2229700

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters