toasters

toasters@lists.teaparty.net

13531 discussions

Force directory mode, uid, gid, & mask
by Jeff Mery 25 Aug '09

25 Aug '09

Hi All, First the basics - this is on a 3040A running 7.3.1.1P2. We also have a dev environment that is a 940C running 7.3.1.1P2 (not that the hardware should matter). Anyway... With ONTAP, is there a way to force the directory mode, uid, gid and mask of files? Here's our use-case: We currently have numerous Solaris systems that have been running Samba for years. As part of an upgrade, we're looking to move this Samba-shared data from the local Solaris systems to our 3040A. The Solaris boxes would mount things up via NFS and users would hit the data via CIFS from our filers. Most of the existing Samba shares are very vanilla. However, we have more than a handful that are setup with the aforementioned options. An example Samba config would be as follows: - Force User Creation = foo - Force Group = bar - Create Mask = 644 - Force Directory Mode = 775 Is there any way to accomplish this on a filer? I'm working through the historical business reasons for all of these scenarios. It may be possible to change/update them, but I figured I'd check here first. There is the anon= option for the NFS exports, but that's not really applicable here. We need the data dropped off via CIFS to have the forced options above when accessed via NFS. I haven't been able to find anything at NOW or in the documentation. TIA, Jeff Mery - MCSE, MCP National Instruments --------------------- sunrise > sunset ---------------------

1 1

unix UID change on NTFS file systems
by Tim Thomas 25 Aug '09

25 Aug '09

Has anyone run into the situation where you have a mixed environment (NIS/NFS for UNIX access; AD/CIFS for NTFS access) and in the process of changing a UNIX UID for a user it does not properly show the change for NTFS files when viewed via NFS from a UNIX box? If you run fsecurity on the ntfs file you can see that it does imbed the UNIX UID in the NTFS file itself. For unix files, it's no problem, you just chown the file to the new UID, however there does not appear to be any solution for NTFS files. I had a case open with NetApp and they say it is "merely cosmetic" and doesn't actually impact the file access or security of the file, which is all true. However if you do an LS from a unix box and see a bogus UID for a user that no longer exists, you might think the file doesn't need to be around, which is a false assumption in this case. It is merely cosmetic, however it can be horribly misleading. Why store the UID in the first place if you can't correct it when it changes. Anyway, any insights would be appreciated. Thanks! Tim Thomas Lockheed Martin

1 0

Re: 7.2.6.1 P2-P8?
by David N. Blank-Edelman 25 Aug '09

25 Aug '09

On Aug 25, 2009, at 10:04 AM, John Stoffel wrote: > How has > 7.3.x been for people? Any gotchas? It doesn't support the DS14mk1 shelves (which is why it isn't an option for us at the moment). -- dNb

2 1

RE: 2050 with high CPU Usage during weekly asup
by Halton, Robert 24 Aug '09

24 Aug '09

Lets say for argument sake that the system is a brand new install with nothing on it apart from the root vols. And that I have 3 of them.. And they all do the same thing. Was just looking for feedback from the world at large before opening my ticket. From: Jeff Mohler [mailto:speedtoys.racing@gmail.com] Sent: Monday, August 17, 2009 8:06 AM To: Borders, Rich Cc: Halton, Robert; toasters(a)mathworks.com Subject: Re: 2050 with high CPU Usage during weekly asup Or it could be nothing at all. High CPU doesnt equal high latencies or slow user performance by itself. Backups will bump up CPU, on slower systems more than faster ones..capture more data. On Mon, Aug 17, 2009 at 7:44 AM, Borders, Rich <Rich.Borders(a)netapp.com> wrote: Well, the asup is a list of commands that generate a lot of file responses that are then later sent off to the asup tool NetApp uses. It could be that it puts stress on vol0 (or root vol) and that is generating the load. (unless you can verify that DFM is erroneous) Rich From: Halton, Robert [mailto:rhalton@tpg.com] Sent: Monday, August 17, 2009 10:30 AM To: toasters(a)mathworks.com Subject: 2050 with high CPU Usage during weekly asup Has anyone else seen this? A 2050 Cluster when it sends the weekly ASUP will max out CPU, or at least DFM tells me so.. *** Event details follow.*** General Information ------------------- DataFabric Manager Serial Number: 1-50-008777 Alarm Identifier: 4 Event Fields ------------- Event Identifier: 2327284 Event Name: CPU Too Busy Event Description: CPU utilization on an appliance Event Severity: Warning Event Timestamp: 16 Aug 03:21 Source of Event --------------- Source Identifier: 4111 Source Name: RCNETAPP2 Type: Active/Active Controller Source Status: Warning Event Arguments --------------- cpuTooBusyThreshold: 95 cpuUtilization: 97.6871 --NetApp DataFabric Manager This message is intended only for the person(s) to which it is addressed and may contain privileged, confidential and/or insider information. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Any disclosure, copying, distribution, or the taking of any action concerning the contents of this message and any attachment(s) by anyone other than the named recipient(s) is strictly prohibited. -- No Signature Required Save The Bits, Save The World! This message is intended only for the person(s) to which it is addressed and may contain privileged, confidential and/or insider information. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Any disclosure, copying, distribution, or the taking of any action concerning the contents of this message and any attachment(s) by anyone other than the named recipient(s) is strictly prohibited.

2 1

2050 with high CPU Usage during weekly asup
by Halton, Robert 17 Aug '09

17 Aug '09

Has anyone else seen this? A 2050 Cluster when it sends the weekly ASUP will max out CPU, or at least DFM tells me so.. *** Event details follow.*** General Information ------------------- DataFabric Manager Serial Number: 1-50-008777 Alarm Identifier: 4 Event Fields ------------- Event Identifier: 2327284 Event Name: CPU Too Busy Event Description: CPU utilization on an appliance Event Severity: Warning Event Timestamp: 16 Aug 03:21 Source of Event --------------- Source Identifier: 4111 Source Name: RCNETAPP2 Type: Active/Active Controller Source Status: Warning Event Arguments --------------- cpuTooBusyThreshold: 95 cpuUtilization: 97.6871 --NetApp DataFabric Manager This message is intended only for the person(s) to which it is addressed and may contain privileged, confidential and/or insider information. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Any disclosure, copying, distribution, or the taking of any action concerning the contents of this message and any attachment(s) by anyone other than the named recipient(s) is strictly prohibited.

2 1

7.2.6.1 P2-P8?
by David N. Blank-Edelman 13 Aug '09

13 Aug '09

Hi- We recently had a crash due to bug #327361 (quotas not play nice with CIFS alternate streams). This is apparently fixed by P2. A quick check on now.netapp.com shows they are now up to P8 with what looks like a number of less than great bugs fixed in the releases later than P2 as well. Netapp support recommends we go to P2 because that is all we strictly need but suggests there would likely be no problem going all the way to P8 if we want. Has anyone had any experiences with either P2 or P8 (or any number in between) that would suggest we should pick one over the other? Thanks! -- dNb

2 1

CIFS volume deduplication
by Davies,Matt 10 Aug '09

10 Aug '09

Hi everyone, We have a NetApp Filer 3040 running 7.2.6.1. We have configured Dedupe on a few volumes with ESX VM's and have saved about 15-25% disk space. Last week, we ran it on our CIFS Volume (Homedir, Shared Drives, etc), which is 950Gigs, but we only saved about 700 megs. These are the following commands we used to start the deduplication... sis on VOL sis start -s VOL It took about 8 hours to scan the volume. Afterwards, "df -s" showed that it saved 0%. Netapp suggested that I wait for the old snapshots to delete, but it still didn't help. Does anyone have any ideas about this ? Thanks Matt ____________________________ Matt Davies Director of International IT Operations General Atlantic 83 Pall Mall London SW1Y 5ES Tel: +44 207 484 3203 Fax: +44 207 484 2803 Mobile: +44 777 559 4265 ____________________________ ________________________________ _____________________________________________________________ This e-mail (including all attachments) is confidential and may be privileged. It is for the exclusive use of the addressee only. If you are not the addressee, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please erase all copies of the message and its attachments and notify us immediately at help(a)generalatlantic.com . Thank You.

4 3

User based Quotas - Why don't they show up correctly when mapped?
by Langdon, Laughlin T. (Lock) 07 Aug '09

07 Aug '09

More fun with user based quotas. When a user has a mapped CIFS share to their home drive the size of the entire volume shows up when they map the drive. I thought user quotas used to just show the "quotaed" space for that user. I.E. I have a 11TB volume. I create a user quota of 500MB and apply it to a user (say xyz99). When XYZ99's home share is mapped they see 11TB available to them, not 500MB. A tree based quota with a hard limit works just fine in showing only 500MB available. I've worked with Netapp support and did get an obscure bug (88541 <http://now.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=88541> ) that has no information and a reply that there isn't much information on this issue. (Maybe the functionality just isn't there? I could swear we used to have that function.) Does anyone use user quotas and have this same problem? Are there better ways to do user home share type CIFS shares? Thanks lock p.s. (Also posted on the NetApp Support Community if you want "points" for answering) J https://forums.netapp.com/thread/2900

4 7

Re: User based Quotas - Why don't they show up correctly when mapped?
by Langdon, Laughlin T. (Lock) 05 Aug '09

05 Aug '09

Yep we use na_ntfschown as well. I will setup some test shares to test your setup. Thaks Lock -----Original Message----- From: Bill Holland Sent: Aug 05, 2009 4:17 PM To: "Tim Thomas" <timothy.b.thomas(a)lmco.com>, "Langdon, Laughlin T. (Lock)" <Langdon.Lock(a)mayo.edu> Cc: "toasters(a)mathworks.com" <toasters(a)mathworks.com> Subject: Re: User based Quotas - Why don't they show up correctly when mapped? There is a tool in the Toolchest on the NOW site called na_chstuff. Within it is one called na_chmod.exe I have a script that I run at 3am every day that uses this to change the ownership of each folder based on the users' login name. We have our user shares saved as filername:/vol/users/username and shared as \\filername\users. They are using NTFS security style and no QTrees. Authenticated Users has List on the first level subfolders with Administrators, System, and Creator Owner having Full Control of everything. The script is something like (I'm at home and doing this off the top of my head): for /d %f in (\\filername\users\*.*) do na_ntfschown /r domain\%f The exact syntax may be off a bit, but you get the idea. Hope this helps. ----- Original Message ----- From: "Tim Thomas" <timothy.b.thomas(a)lmco.com> To: "Langdon, Laughlin T. (Lock)" <Langdon.Lock(a)mayo.edu> Cc: "Bill Holland" <hollandwl(a)gmail.com>; <toasters(a)mathworks.com> Sent: Wednesday, August 05, 2009 5:28 PM Subject: Re: User based Quotas - Why don't they show up correctly when mapped? > We also are using user level quotas and it shows up just fine when mapped. > are you using usermap.cfg to definite your qtrees as homedir qtrees, so > the mapping is \\filer\userid? > do all your users infact "own" their own files. if using unix security > style for your qtrees this is usually easy to check. > If using ntfs security style this is more difficult to check and set, but > you have to make sure that the "owner" of the files and the directories is > the individual user. (we use unix security style, it makes things much > easier to script up) > the only exception we have run into is if the user is in the > administrators group, if this is the case you must set > wafl.nt_admin_priv_map_to_root to off for the quota to appear properly for > those users in the local administrators group. if you set that option to > off, then the quotas show up correctly, even for the admins. > > Tim Thomas > > Langdon, Laughlin T. (Lock) wrote: >> >> I’m running 7.2.5.1p6 (upgrading to 7.2.6.1 this weekend) >> >> They are enabled, and active (can’t put more data than the quota is set >> to). I’ve even created a monitoring tree based quota per the >> documentation from netapp. >> >> Here’s a modified version of my quotas for homeshares >> >> #USER HOME SHARES BEGIN >> >> * user@/vol/VOLUME/QTREE04 - - - 1048576K - >> >> * user@/vol/ VOLUME/QTREE09 - - - 104857600K - >> >> * user@/vol/ VOLUME/QTREE02 - - - 102400K - >> >> * user@/vol/ VOLUME/QTREE06 - - - 10485760K - >> >> * user@/vol/ VOLUME/QTREE10 - - - 209715200K - >> >> * user@/vol/ VOLUME/QTREE01 - - - 20480K - >> >> * user@/vol/ VOLUME/QTREE07 - - - 26214400K - >> >> * user@/vol/ VOLUME/QTREE03 - - - 512000K - >> >> * user@/vol/ VOLUME/QTREE08 - - - 52428800K - >> >> * user@/vol/ VOLUME/QTREE05 - - - 5242880K - >> >> * user@/vol/ VOLUME/QTREE11 - - - 20480K - >> >> #USER HOME SHARES END >> >> Here’s a direct quote from Netapp Support re: my issue of USER quotas not >> properly showing when mapped >> >> “I wanted to find you some documentation for this condition but found >> little. However, I did confirm your suspicion that this is by design” >> >> To me that says what you have currently should not work. Sigh… round and >> round we go J >> >> Thanks for the info, It will give me more firepower to figure out what >> the issue really is. >> >> *From:* Bill Holland [mailto:hollandwl@gmail.com] >> *Sent:* Wednesday, August 05, 2009 9:00 AM >> *To:* Langdon, Laughlin T. (Lock) >> *Cc:* toasters(a)mathworks.com >> *Subject:* Re: User based Quotas - Why don't they show up correctly when >> mapped? >> >> We are using user quotas for our users and it shows the capacity based on >> their quota, not the entire volume. We are using 7.2.6.1. Perhaps your >> quotas aren't enabled or haven't completed a resize operation? >> >> On Wed, Aug 5, 2009 at 11:47 AM, Langdon, Laughlin T. (Lock) >> <Langdon.Lock(a)mayo.edu <mailto:Langdon.Lock@mayo.edu>> wrote: >> >> More fun with user based quotas. When a user has a mapped CIFS share to >> their home drive the size of the entire volume shows up when they map the >> drive. I thought user quotas used to just show the "quotaed" space for >> that user. >> >> I.E. I have a 11TB volume. I create a user quota of 500MB and apply it to >> a user (say xyz99). When XYZ99's home share is mapped they see 11TB >> available to them, not 500MB. A tree based quota with a hard limit works >> just fine in showing only 500MB available. >> >> I've worked with Netapp support and did get an obscure bug (88541 >> <http://now.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=88541>) that >> has no information and a reply that there isn’t much information on this >> issue. (Maybe the functionality just isn’t there? I could swear we used >> to have that function.) >> >> Does anyone use user quotas and have this same problem? >> >> Are there better ways to do user home share type CIFS shares? >> >> Thanks >> lock >> >> p.s. (Also posted on the NetApp Support Community if you want “points” >> for answering) J >> >> https://forums.netapp.com/thread/2900 >>

1 0

Re: Hanging NDMP backup sessions?
by John Stoffel 17 Jul '09

17 Jul '09

Patrick> There is a known bug regarding hanging NDMP sessions and this Patrick> ontap version. Upgrade to the P2 version and your issue Patrick> should be resolved Thanks for the info, though in my case I'm not sure if that's completely the issue, since it looks like the NDMP session(s) tend to go away properly, but the backup sessions don't terminate properly, which leads to NDMP failures when they can't allocate new backup sessions. In any case, I'll login to NOW and see what I can find in terms of the changes between 7.2.6.1 and 7.2.6.1P2 that relate to NDMP. Thanks! John

1 1

Hanging NDMP backup sessions?
by John Stoffel 17 Jul '09

17 Jul '09

Hi all, Is anyone else seeing hanging backup sessions under 7.2.6.1 when doing NDMP backups to a directly attached FC LTO4 tape drives, using CommVault 7.0.0 Update 76 Version #### software? For example: > ndmpd status ndmpd ON. Session: 79 Active version: 4 Operating on behalf of primary host. tape device: not open mover state: Idle data state: Idle data operation: None > backup status ID State Type Device Start Date Level Path -- ----------- ---- ------ ------------ ----- --------------- 0 RESERVED NDMP 1 RESERVED NDMP 2 RESERVED NDMP 3 RESERVED NDMP 4 RESERVED NDMP 5 RESERVED NDMP 6 RESERVED NDMP 7 RESERVED NDMP 8 RESERVED NDMP 9 RESERVED NDMP 10 RESERVED NDMP 11 RESERVED NDMP 12 RESERVED NDMP 13 RESERVED NDMP 14 RESERVED NDMP 15 RESERVED NDMP 16 RESERVED NDMP 17 RESERVED NDMP 18 RESERVED NDMP 19 RESERVED NDMP 20 RESERVED NDMP 21 RESERVED NDMP 22 RESERVED NDMP 23 RESERVED NDMP 24 RESERVED NDMP 25 RESERVED NDMP 26 RESERVED NDMP 27 RESERVED NDMP Now I know I can just do: > backup terminate # to cleanup these sessions, but I'm wondering why I'm seeing them in the first place, esp since my other sites running the same software and OSes aren't seing these issues, or at least not to as great a degree. It could be that I've mis-configured CommVault somehow... Thanks, John John Stoffel - Senior Staff Systems Administrator - System LSI Group Toshiba America Electronic Components, Inc. - http://www.toshiba.com/taec john.stoffel(a)taec.toshiba.com - 508-486-1087

1 0

cant delete a snapshot
by Chaim Rieger 17 Jul '09

17 Jul '09

we have a snapshot of a lun taken by snapmanager v6.x no clones however snapshot states as busy,lun have a case open with netapp, but am getting nowhere. anybody have any clues ?

3 4

disable root account
by John Sfetsoris 16 Jul '09

16 Jul '09

hello this is a fas250 masine with 7.2.4 ontap installed We need to disable root access to storage from cmd and http as well, or prevent login from this account. We cannot upgrade to 7.3 for now can somoean help on this? thnks in advance john -- View this message in context: http://www.nabble.com/disable-root-account-tp24514680p24514680.html Sent from the Network Appliance - Toasters mailing list archive at Nabble.com.

2 1

Mounting VMware Volume Snapshot on Windows Host
by Skip Norman 10 Jul '09

10 Jul '09

I have a windows 2003 server with Snapdrive 4.2.1 and I was wondering how I can mount a snapshot of a volume that holds vmware luns. Is this possible? I was told that this is feasible with VCB framework installed; however, I currently receive an error: "unable to connect disk. Failure in connecting to the virtual disk. Error: A timeout of 600 secs elapsed while waiting for the volume arrival notification from the operating system". I have verified that I can mount exchange volume snapshots for SMBR recovery on this machine. Also, what are others here doing for image level backups of their VM's? Are there better/cheaper alternatives to VCB and SMVI? How is SMVI working out for those of you out there using it? Thanks.

4 4

Strange data loss on a Netapp NFS volume
by Straub Ciaran 07 Jul '09

07 Jul '09

Hi Tosters, Has any one ever encountered a strange data loss on a Netapp NFS volume? Last Sunday there was an incident Production of my customer was down as 2 Oracle database was gone form the volume. The Netapp was not serving the database to the application server. There should never be a Full volume or Full aggr, but things happen we all know Mr. Murphy law. The volume did reach maximum size at some point, and there was a hanging snapmirror. Met vriendelijke groet / Kind regards / مع تحياتي / 简ﾌｶﾅ, Ciaran Straub Technical Service Specialist Infrastructure Services FUJITSU SERVICES Het Kwadrant 1 Postbus 1067, 3600 BB Maarssen, The Netherlands Tel: +31 346 59 8112 Email: :Ciaran.Straub@nl.Fujitsu.com <mailto::Bas.Rapmund@nl.fujitsu.com> Web: nl.fujitsu.com <http://nl.fujitsu.com/> Fujitsu Services B.V., Registered in the Netherlands no 30078286 ______________________________________________________________________ The information in this e-mail (and its attachments) is confidential and intended solely for the addressee(s). If this message is not addressed to you, please be aware that you have no authorisation to read this e-mail, to copy it or to forward it to any person other than the addressee(s). Should you have received this e-mail by mistake, please bring this to the attention of the sender, after which you are kindly requested to destroy the original message and delete any copies held in your system. Fujitsu Services and its affiliated companies cannot be held responsible or liable in any way whatsoever for and/or in connection with any consequences and/or damage resulting from the contents of this e-mail and its proper and complete dispatch and receipt. Fujitsu Services does not guarantee that this e-mail has not been intercepted and amended, nor that it is virus-free. _____________________________________________________________________

1 0

Snapdrive problem
by David.Ashton＠rullion.co.uk 06 Jul '09

06 Jul '09

Hi Toasters Last week we attempted to extend a disk - a lun mounted in windows 2003 server using snapdrive (ver 6.0.1) - something we do fairly often. The event viewer on the server reported: Failed to expand the LUN by 51200 MB. Failure in expanding NTFS file system on the disk. LUN Name = bondv8_database.lun Storage Path = /vol/vol_bondv8/ Protocol Type = LUN Storage System Name = RULWAFAS01 Error code : The parameter is incorrect. However, the filer actually did expand the lun, and from the filer everything looked kosher. Windows however, did not reflect the change. We disconnected/reconnected etc and it wouldn't change. Netapp told us to either a) rewrite the MBR on the disk manually using a windows support tool (beyond our expertise and a bit scary) or b) copy all the data off, destroy the volume, recreate, and copy back. We did (b) and the copying of the data to a new volume took 7 hours, and once we destroyed/recreated a new volume, the copy back took 2 hours. This was all over the Fibre channel, and the speed difference I cant account for, I can expand the new lun/volume using snapdrive with no problems now, but have to admit my confidence in snapdrive is shaken. It's taken all weekend to sort this out (following an aborted copy on saturday) and am worried that such a fundamental facility of the SAN is being compromised by the Snapdrive software. Has anyone got any ideas as to why windows would do this? Its not happened before, and its a stable server, all upto date. Ontap is 7.2.5.1, filers, FC switches, drivers etc were updated late last year and we've been very stable. thanks Dave Ashton ********************************************************************** The information contained in this e-mail and any attachments are intended for the named recipient(s) only. It may also be privileged and confidential. If you are not an intended recipient, you must take no action as a result of receiving it, including, but not limited to copying, distributing and amending it. If this communication has been sent to you in error, please contact us immediately and do not show the communication to any other party. Rullion shall have no liability whatsoever in respect of the content of the communication and makes no warranty as to accuracy. Any views or opinions presented are solely those of the author. Viruses:- Although we have taken steps to ensure that this e-mail and attachments are free from viruses, we advise that in keeping with good computing practice, the recipient should ensure they are actually virus free. ********************************************************************** ________________________________________________________________________ This e-mail has been scanned for all viruses by Star. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk ________________________________________________________________________

3 2

Snapdrive for AIX
by Richard Distrajo 06 Jul '09

06 Jul '09

Hi Toasters, Need help regarding Snapdrive AIX, it fails everytime I create disk using Snapdrive for AIX. But If I am doing the lun create and mapping the lun manually to the AIX host it works fine. The AIX host can dicover and use the LUN I have created manually from the storage. Here is the error I am getting; gsb-t-mgt-01 # snapdrive storage create -lun 10.1.100.80:/vol/voltest/lun2 -lunsize 10g LUN 10.1.100.80:/vol/voltest/lun2 ... created mapping new lun(s) ... done discovering new lun(s) ... *failed* Cleaning up ... - LUN 10.1.100.80:/vol/voltest/lun2 ... deleted 0001-476 Admin error: Unable to discover the device associated with 10.1.100.80:/vol/voltest/lun2. If multipathing in use, there may be a possible multipathing configuration error. Please verify the configuration and then retry. default-transport is fcpmultipathing-type is nativempio Thanks in advance.... New Email names for you! Get the Email name you've always wanted on the new @ymail and @rocketmail. Hurry before someone else does! http://mail.promotions.yahoo.com/newdomains/aa/

1 0

yxiao2004 is inviting you to play Evony!
by yxiao2004＠gmail.com 05 Jul '09

05 Jul '09

Hello, Your friend, yxiao2004(a)gmail.com, has invited you to play EVONY, a free online Web Browser MMOG Game that allows you to build your own empire, launch fights and trade properties. Sign up today for totally FREE! Click on the following link to sign up: http://yxiao2004.evony.com/ Have fun! Evony Team.

1 0

throughput/performance numbers
by Babar Haq 05 Jul '09

05 Jul '09

Hi all, IHAC who wants us to provide them rough throughput (in GB/s) per 100TB of storage on NFS using POSIX and MPIO separately. The hardware/software design depends on us since the customer pays per TB. Any idea how we can furnish their requests. Thanks in advance. Regards, Babar -- Be Yourself @ mail.com! Choose From 200+ Email Addresses Get a Free Account at www.mail.com

2 1

Netapp SDK -- HTTP Port 1023
by Willeke, Jochen 02 Jul '09

02 Jul '09

Hi toasters, we are in the need to use the netapp SDK through a firewall. While trying this we found out, that the SDK uses TCP Port 1023 as the source port. Sadly our firewall defines HTTP source-ports from 1024-upward and therefore denies the transit :( Has anybody came across this issue and has an idea if this behavior can be changed? Best Regards and thanks in advance Jochen Willeke -- WINCOR NIXDORF International GmbH Sitz der Gesellschaft: Paderborn Registergericht Paderborn HRB 3507 Gesch�ftsf�hrer: Eckard Heidloff (Vorsitzender), Stefan Auerbach, Dr. J�rgen Wunram Vorsitzender des Aufsichtsrats: Karl-Heinz Stiller Steuernummer: 339/5884/0020 - Ust-ID Nr.: DE812927716 - WEEE-Reg.-Nr. DE44477193 Diese E-Mail enth�lt vertrauliche Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrt�mlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese E-Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser E-Mail ist nicht gestattet. This e-mail may contain confidential information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.

2 3

Used NetApp equipment [Non-technical]
by LOhit 01 Jul '09

01 Jul '09

Hello All, I am sorry for posting a non-technical question, but I couldn't think of any other place. I am planning to buy a used FAS940 which already has licenses for NFS & CIFS. However, I remember reading a post on this forum that I'll have to purchase these licenses once again from NetApp since the licenses are not transferable. Has anyone tried doing this before? if yes, could you please share with me the figures (cost of licenses).? I only need NFS and CIFS. Thanks, LOhit

1 0

LIST
by Jeffries, Mark 23 Jun '09

23 Jun '09

LIST Mark Jeffries IT Infrastructure - Data Storage Management Commerzbank AG 30 Gresham Street London EC2P 2XY Direct: +44(0)20 74752219 Mobile: +44(0)7590 758255 Email: mark.jeffries(a)dkib.com Commerzbank AG This e-mail is confidential and the information contained in it may be privileged. It should not be read, copied or used by anyone other than the intended recipient. If you have received it in error, please contact the sender immediately by telephoning (+44 (0)20 7623 8000) or by return email, and delete the e-mail and do not disclose its contents to any person. We believe, but do not warrant, that this e-mail and any attachments are virus free, but you must take full responsibility for virus checking. Please refer to http://www.dresdnerkleinwort.com/disc/email/ and read our e-mail disclaimer statement and monitoring policy. Dresdner Kleinwort is a brand and trading name of the Commerzbank group and operates through Commerzbank AG, Dresdner Kleinwort Limited and their affiliated or associated companies. Commerzbank AG is a company incorporated in Germany with limited liability and registered in England (registered no. FC008139, place of business 60 Gracechurch Street, London EC3V 0HR) and is authorised by Bundesanstalt fuer Finanzdienstleistungsaufsicht (BaFin) and authorised and subject to limited regulation by the Financial Services Authority (FSA). Dresdner Kleinwort Limited is a company incorporated in England with limited liability (registered no. 551334, registered office 30 Gresham Street, London EC2V 7PG) and is authorised and regulated by the FSA. Details about the extent of our authorisations and regulation are available on request.

1 0

Re: SQL luns
by Jody Martin 23 Jun '09

23 Jun '09

Thanks guys! Found an article in the knowledgebase as well ( https://now.netapp.com/Knowledgebase/solutionarea.asp?id=kb36108) On Mon, Jun 22, 2009 at 6:24 PM, Klise, Steve <klises(a)pamf.org> wrote: > If you are using snapdrive, the luns are properly aligned. > > > > You can read this TR about lun alignment. > > > > http://media.netapp.com/documents/tr-3747.pdf > > > > > > *From:* owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] > *On Behalf Of *Jody Martin > *Sent:* Monday, June 22, 2009 8:12 AM > *To:* toasters(a)mathworks.com > *Subject:* SQL luns > > > > Hey all, > > Anyone have the Netapp document on block alignment for SQL 2005? > > jody >

1 0

Errors every second in my audit log after starting to monitor with Catcti/SDK
by Page, Jeremy 22 Jun '09

22 Jun '09

We've recently started using Cacti and the Ontap SDK to monitor our filer's performance but something is not working properly, I see the following line 2-3 times a second in the Audit Log: Mon Jun 22 12:25:51 EDT [array02: HTTPPool04:debug]: root:AUTH:error:Login failed for user root from IP 10.1.17.8. reason "User not authenticated" Currently it's configured to use the root account, once we figure out what's wrong we'll create a service acount before moving the monitoring to production. Any suggestions on what's going wrong? Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email.

1 0

SQL luns
by Jody Martin 22 Jun '09

22 Jun '09

Hey all, Anyone have the Netapp document on block alignment for SQL 2005? jody

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters