toasters

toasters@lists.teaparty.net

1 participants
13516 discussions

RE: terminating the console telnet connection
by Ehrhart, Rick 21 Oct '02

21 Oct '02

Sorry, I made a mistake. The logout telnet command is available in ONTAP 6.2 or later. I apologize for the mis-information. - Rick - > -----Original Message----- > From: Ehrhart, Rick [mailto:Rick.Ehrhart@netapp.com] > Sent: Monday, October 21, 2002 11:25 AM > To: 'Farid Hamjavar'; toasters(a)mathworks.com > Subject: RE: terminating the console telnet connection > > > Yes there is: > > logout telnet > > > - Rick - > > > -----Original Message----- > > From: Farid Hamjavar [mailto:hamjavar@unm.edu] > > Sent: Monday, October 21, 2002 10:32 AM > > To: toasters(a)mathworks.com > > Subject: terminating the console telnet connection > > > > > > > > Hello > > > > ontap 6.1.3R1 > > > > as there can only obe ne login session by > > root via console to the filer .... > > > > is there a way to terminate the connection > > remotely ...? > > > > > > thanks, > > farid > > > > >

1 0

RE: terminating the console telnet connection
by Ehrhart, Rick 21 Oct '02

21 Oct '02

Yes there is: logout telnet - Rick - > -----Original Message----- > From: Farid Hamjavar [mailto:hamjavar@unm.edu] > Sent: Monday, October 21, 2002 10:32 AM > To: toasters(a)mathworks.com > Subject: terminating the console telnet connection > > > > Hello > > ontap 6.1.3R1 > > as there can only obe ne login session by > root via console to the filer .... > > is there a way to terminate the connection > remotely ...? > > > thanks, > farid > >

1 0

terminating the console telnet connection
by Farid Hamjavar 21 Oct '02

21 Oct '02

Hello ontap 6.1.3R1 as there can only obe ne login session by root via console to the filer .... is there a way to terminate the connection remotely ...? thanks, farid

1 0

IT IS IMPORTANT I GET YOUR RESPONSE.
by JACKSON MOYO 21 Oct '02

21 Oct '02

FROM: JACKSON MOYO. FAX: +31-619-104-918. TEL: +31-629-238-054. Please reply to:E-mail:jmoyo@37.com Complements of the day.Grace, Peace and love to you. I hope my letter does not cause you too much embarrassment as I write to you in good faith. Please excuse my intrusion into you business life. My name is Jackson Moyo, the elder son of Mr.Dennnis Moyo from the Republic of Zimbabwe. During the current war against the farmers in Zimbabwe from the supporters of President Robert Mugabe,in his effort to chase all the white farmers out of the country, he ordered all the white farmers to surrender their farms to his party members and his Followers. My father was one of the most successful farmer in my country, but he did not support the idea of dispossessing the white farmers of their land. Because of this, his farm was invaded and burnt by government supporters. In the course of the attack, my father was killed, and the invaders made away with a lot of items from my Father?s farm. And our family house was utterly destroyed. My mother died too out of heart attack. Before the death of my father, he drew my attention to the sum of US$10MILLION, Which he deposited with a Security Company in Amsterdam when the crisis was coming up. My sister and I decided to move out of Zimbabwe for our own security, because our lives were in danger. We decided to move to the Amsterdam, The Netherlands where my father deposited this money. Till date, the security company is not aware of the content of the consignment because my father used his diplomatic immunity as at that time to deposit the consignment as important personal valuables.I decided to have contact with overseas person/firm who will assist me to move the money out of Amsterdam. This becomes necessary because as political asylum seekers, we are not allowed to own or operate a bank account. If you accept this proposal, you shall receive 20% of the entire amount for assisting us to move this money out, 75% of this amount shall be for us, and the remaining 5% shall be mapped out for expenses incurred in the course of the transaction. I want you to immediately confirm your interest in the project via my fax number, as soon as I get your response, I will give you more details on how we can proceed. Thanks for your anticipated cooperation. I await your Urgent response Best regards, JACKSON MOYO

1 0

RE: option cifs.audit.membufsize
by Clawson, Simon 17 Oct '02

17 Oct '02

Its a documented bug.. Here's the answer I got - Hi Simon, Please remove the following line from /etc/registry.local file manually. options.cifs.access_logging.buffer_size=4096 That should fix your problem. We have filed a bug (number: 60595) for this. We will make it online soon. Please let me know the result after removing the line. Thanks, Sreenivasa Potakamuri Network Appliance. Hope this helps. Simon -----Original Message----- From: Pawel Rogocz [mailto:pawel@rogocz.com] Sent: 16 October 2002 01:42 To: toasters(a)mathworks.com Subject: option cifs.audit.membufsize I am running NetApp Release 6.2.1 Every hour ( 3602 seconds to be pricise) one of my filers logs this: [registry_control:warning]: option cifs.audit.membufsize: Value (4096) is out of range (10240 to 262144), using 65536 instead. Does anyone now what might be causing this ? Pawel --

2 1

Re: Service Usage information in Autosupport e-mails (fwd)
by Dylan Northrup 16 Oct '02

16 Oct '02

I got this reply to my query. Thanks to Britt for the fast reply with this information. -- Dylan Northrup northrup(a)loudcloud.com Unix System Administrator EDS Automated Operations ---------- Forwarded message ---------- Date: Wed, 16 Oct 2002 10:19:25 -0400 (EDT) From: Britt Bolen <bolen(a)netapp.com> To: Dylan Northrup <northrup(a)loudcloud.com> Subject: Re: Service Usage information in Autosupport e-mails On Tue, 15 Oct 2002, Dylan Northrup wrote: > I've tried looking around and haven't been able to find what the precise > information is that's contained in the 'SERVICE USAGE' section of a netapp's > auto-support e-mail that filers send out. Here's some example output so you > guys know what I'm talking about: > > ===== SERVICE USAGE ===== > Service statistics as of Sun Oct 6 08:46:15 GMT 2002 > System (UP). First recorded (72944725) on Wed Jun 14 02:20:50 GMT 2000 > P 12, 3626258, 3620527, Wed Jul 26 13:17:09 GMT 2000 > U 2, 25042, 18089, Tue Oct 1 20:36:50 GMT 2002 > NFS (UP). First recorded (72944721) on Wed Jun 14 02:20:54 GMT 2000 > P 12, 5922405, 5916260, Tue Aug 22 02:59:22 GMT 2000 > U 2, 25118, 18130, Tue Oct 1 20:37:31 GMT 2002 This is the condensed output of the availtime command. Try running 'availtime full' (with a wide terminal!) it gives a more verbose output. Basically it tells you how many planned (P) and unplanned (U) downtimes the filer has had, how long those downtimes lasted, and when and how long the longest down time was. feel free to forward my response back to the list. Britt -- Britt Bolen, bolen(a)netapp.com, Sledgehammer Engineering, block head. "Aah, for the days when aviation was a gentleman's pursuit - back before every Joe Sweatsock could wedge himself behind a lunch tray and jet off to Raleigh-Durham." --- Sideshow Bob

2 1

Re: option cifs.audit.membufsize
by Paul Caron 16 Oct '02

16 Oct '02

This should help. >From: "Potakamuri, Sreenivasa" <Sreenivasa.Potakamuri(a)netapp.com> >To: "'Paul Caron'" <caron(a)sig.com> >Subject: RE: upgrading the ONTAP version >Date: Fri, 4 Oct 2002 11:43:58 -0700 >MIME-Version: 1.0 > >Please remove the following line from /etc/registry.local file manually. > > options.cifs.access_logging.buffer_size=4096 > >That should fix your problem. We have filed a bug (number: 60595) for this. >We will make it online soon. > > >Please let me know the result after removing the line. > > >Thanks, >Sreeni >Date: Tue, 15 Oct 2002 17:41:35 -0700 >From: Pawel Rogocz <pawel(a)rogocz.com> >To: toasters(a)mathworks.com >Subject: option cifs.audit.membufsize >Mime-Version: 1.0 >Content-Disposition: inline >User-Agent: Mutt/1.2.5i > >I am running NetApp Release 6.2.1 > >Every hour ( 3602 seconds to be pricise) one of my filers logs this: > >[registry_control:warning]: option cifs.audit.membufsize: >Value (4096) is out of range (10240 to 262144), using 65536 instead. > > >Does anyone now what might be causing this ? > > > >Pawel > >--

1 0

tape backup with overland librarypro
by steve＠hq.newdream.net 16 Oct '02

16 Oct '02

we recently purchased an overland librarypro AIT3 tape backup unit and wanted to know the most cost effective software solution for backing up over NDMP. We have a price quote for NetVault but they seem very pricey especially when we'll be backing up multiple filers. In particular, I'd like to hear others success/horror stories pertaining to the other ndmp backup softwares listed on ndmp.org. Also, is there any free ndmp solution available that works reliably with Netapps (and tape units) connected directly to them? Thanks, Steve

1 0

Tuning R100 for LINUX
by Hussain, Zaki H. 16 Oct '02

16 Oct '02

We a couple of R100s serving NFS to the LINUX clusters. Is there a document that explains how to tune R100 to NFS to LINUX. Thanks......

1 0

option cifs.audit.membufsize
by Pawel Rogocz 16 Oct '02

16 Oct '02

I am running NetApp Release 6.2.1 Every hour ( 3602 seconds to be pricise) one of my filers logs this: [registry_control:warning]: option cifs.audit.membufsize: Value (4096) is out of range (10240 to 262144), using 65536 instead. Does anyone now what might be causing this ? Pawel --

1 0

Service Usage information in Autosupport e-mails
by Dylan Northrup 15 Oct '02

15 Oct '02

I've tried looking around and haven't been able to find what the precise information is that's contained in the 'SERVICE USAGE' section of a netapp's auto-support e-mail that filers send out. Here's some example output so you guys know what I'm talking about: ===== SERVICE USAGE ===== Service statistics as of Sun Oct 6 08:46:15 GMT 2002 System (UP). First recorded (72944725) on Wed Jun 14 02:20:50 GMT 2000 P 12, 3626258, 3620527, Wed Jul 26 13:17:09 GMT 2000 U 2, 25042, 18089, Tue Oct 1 20:36:50 GMT 2002 NFS (UP). First recorded (72944721) on Wed Jun 14 02:20:54 GMT 2000 P 12, 5922405, 5916260, Tue Aug 22 02:59:22 GMT 2000 U 2, 25118, 18130, Tue Oct 1 20:37:31 GMT 2002 Thanks for any information you can give or light you can shed on this question. -- Dylan Northrup northrup(a)loudcloud.com Unix System Administrator EDS Automated Operations

1 0

R100-Filer disaster scenario
by Phil Hill 15 Oct '02

15 Oct '02

Hi all, does anybody know, how fast is a R100 ? We want to build an environment, which reduce the downtime in case of a disaster. Following in mind, some Netapp Filers do a SnapMirror over a WAN-connection to a R100. Beside the R100 is a spare-system which could replace any production-filer. In case of a disaster we are able to copy the volumes to the spare-system and replace it with the broken filer. This should be much faster then a full restore from a local tape. I am talking about 0.5TB - 1.5TB per remote filer. We also would do only a tape-backup from the R100, no local tape drives in the remote offices. Questions: - What is the real read-performance of a R100? - What is the fastest way to duplicate the broken volumes from the R100 to the spare-system? volcopy ? ndmpcopy ? something else ? - How long does it take to copy a 1TB volume to another filer. - Does anybody have something like above described ? Thanks in advance Phil

5 4

dump timeout
by Igor Schein 15 Oct '02

15 Oct '02

Hi, We are running multitape dump to a locally attached ATL L200 library with SDLT drive. Once dump has written to the end of the, the tape gets unload, the new tape gets loaded and the dump continues. A small percentage of our tapes for some reason take longer than others to get loaded into the drive. But it looks like dump has hardcoded timeout, or hardcoded number of tries, after which it thinks the next tape failed to load, and backup aborts. From the common sense viewpoint, dump should ( at least optionally ) wait/keep trying indefinitely for the next tape to load, so that an admin doesn't lose time in this case, and in case where not enough tapes were loaded in the library to begin with. Does anyone know of a solution for this issue? Thanks Igor

1 0

RE: qual_devices and ST173404FC
by hilltemp 15 Oct '02

15 Oct '02

Hey Clarence, Haven't seen you since NetApp training in Sydney, hope all is well. You are definitely right. You are asking for trouble putting in unqualified disks. Now, has anybody got any clues on my NFS problems I posted? Aaron Hill Systems Engineer Navitaire -----Original Message----- From: Clarence Ngoh [mailto:cngoh@bigpond.net.au] Sent: Tuesday, October 15, 2002 10:06 AM To: toasters(a)mathworks.com Subject: Re: qual_devices and ST173404FC I am pretty sure that third party disks are not usable. NetApp disks contains a firmware that needs to operate and understand the WAFL system. Note that your system will automagically shut down in 72 hours with the continued use of the unqualified disk. -- Clarence. On Tue, 15 Oct 2002 09:40 am, in a distant galaxy, steve(a)hq.newdream.net, wrote: > I installed 3rd party Seagate drives ST173404FC drives in my F720 filer > running Ontap 6.3. I updated the /etc/qual_devices with the one from the > website. However the filer still complains about these disks. It says: > > Disk 8.8 ("SEAGATE ", "ST173404FCCereva", "FAD5") could not be qualified > > Device qualification failure detected. Refer to the > qual_devices man page for information on updating device > qualification data. All devices MUST be qualified > for continued system operation. > > Mon Oct 14 23:14:50 GMT [dyn_dev_qual_admin:error]: Device qualification > failure detected. Mon Oct 14 23:14:50 GMT [dyn_dev_qual_admin:info]: > Firmware is up-to-date on all disk drives Mon Oct 14 23:14:50 GMT > [ses_update_admin:info]: All disk shelves have up-to-date firmware. > > Can I edit the qual_devices and add a line for ST173404FCCereva? Because > it already has a line for ST173404FC which I thought would work fine with > these drives. Whatever 'Cereva' means I don't know, but the drives are > brand new and they don't say Cereva on the front. They say 'Model: > ST173404FC'. So I'm not sure why netapp is recognizing them differently. > > Has anyone else been able to use 3rd party 72GB disks? Which > brand/model did you use. I've had no trouble before using 3rd party > ST19171FC disks. This is the first time I've ever seen anything like > this. > > Any help would be appreciated. > > Thanks, > > Steve

1 0

qual_devices and ST173404FC
by steve＠hq.newdream.net 15 Oct '02

15 Oct '02

I installed 3rd party Seagate drives ST173404FC drives in my F720 filer running Ontap 6.3. I updated the /etc/qual_devices with the one from the website. However the filer still complains about these disks. It says: Disk 8.8 ("SEAGATE ", "ST173404FCCereva", "FAD5") could not be qualified Device qualification failure detected. Refer to the qual_devices man page for information on updating device qualification data. All devices MUST be qualified for continued system operation. Mon Oct 14 23:14:50 GMT [dyn_dev_qual_admin:error]: Device qualification failure detected. Mon Oct 14 23:14:50 GMT [dyn_dev_qual_admin:info]: Firmware is up-to-date on all disk drives Mon Oct 14 23:14:50 GMT [ses_update_admin:info]: All disk shelves have up-to-date firmware. Can I edit the qual_devices and add a line for ST173404FCCereva? Because it already has a line for ST173404FC which I thought would work fine with these drives. Whatever 'Cereva' means I don't know, but the drives are brand new and they don't say Cereva on the front. They say 'Model: ST173404FC'. So I'm not sure why netapp is recognizing them differently. Has anyone else been able to use 3rd party 72GB disks? Which brand/model did you use. I've had no trouble before using 3rd party ST19171FC disks. This is the first time I've ever seen anything like this. Any help would be appreciated. Thanks, Steve

2 1

RE: verifying that snap is turned off
by Daniel Finn 12 Oct '02

12 Oct '02

On all of my netapps running a newer version of ONTAP the command worked and I got the following resonse: snapmirror is not licensed but on my F740 running NetApp Release 5.3.5R2 it doesn't recognize that command. What is the way with the older versions of ONTAP to verity that snap is turned off? Thanks Dan -----Original Message----- From: Jeff Kennedy [mailto:jlkennedy@amcc.com] Sent: Friday, October 11, 2002 5:04 PM To: Daniel Finn Subject: Re: verifying that snap is turned off snapmirror status Daniel Finn wrote: > > How can I do this? -- ===================== Jeff Kennedy Unix Administrator AMCC jlkennedy(a)amcc.com

4 3

RE: Replacing a SCSI cable
by Link, Bill (OTS-EDH) 11 Oct '02

11 Oct '02

It's more or less "safe" if you are dealing with passive (differential) interfaces. If dealing with active (single-ended) interface I like to be sure that the device with the far end terminator is powered down. In any case, all the devices in the string have to be idle when you break the chain. SCSI controllers get most upset when they lose sight of their terminator while a bus transaction is taking place. Bill Link SysAdmin, DSTOutput inc. and Old Hardware Guy bill_link(a)billing.com -----Original Message----- From: Mike Sphar [mailto:mike.sphar@Remedy.COM] Sent: Friday, October 11, 2002 7:44 AM To: toasters(a)mathworks.com Subject: RE: Replacing a SCSI cable Is that really safe? I was always taught never to connect or disconnect a SCSI cable on a powered-up system due to the possibility of damaging the SCSI controller, and I've actually seen that happen on a sparcstation once. Do the netapps and the tape drives have some additional technology that allows hot-swapping the scsi cable? -- Mike Sphar - Sr Systems Administrator - Remedy Corporation -----Original Message----- From: Mike Ball [mailto:MBall@datalink.com] Sent: Friday, October 11, 2002 7:36 AM To: 'igor(a)txc.com'; toasters(a)mathworks.com Subject: RE: Replacing a SCSI cable Igor, You can hot swap the cable. I would sure no backup jobs are running on the Netapp and if you are using NDMP make sure you turn it off (ndmpd off) before swapping cables. It should work fine. Mike -----Original Message----- From: Igor Schein [mailto:igor@txc.com] Sent: Wednesday, October 09, 2002 6:05 PM To: toasters(a)mathworks.com Subject: Replacing a SCSI cable Hi, what is the current recommendation as far as replacing a SCSI cable connecting the filer and the tape library? Does filer need to be rebooted, or is it safe to hot-swap the cable? Thanks Igor Notice: This e-mail and any attachments are intended only for the individual or company to which it is addressed and may contain information which is privileged, confidential and prohibited from disclosure or unauthorized use under applicable law. If you are not the intended recipient of this e-mail, you are hereby notified that any use, dissemination, or copying of this e-mail or the information contained in this e-mail is strictly prohibited by the sender. If you have received this transmission in error, please return the material received to the sender and delete all copies from your system. Thank you.

1 0

verifying that snap is turned off
by Daniel Finn 11 Oct '02

11 Oct '02

How can I do this?

1 0

RE: Replacing a SCSI cable
by Mike Ball 11 Oct '02

11 Oct '02

As long as there is no signal (ex- scanning SCSI card or Tape I/O) going down the SCSI line while the cables are being swapped I have never had a issue. It is nothing special about the Netapp. -----Original Message----- From: Mike Sphar [mailto:mike.sphar@Remedy.COM] Sent: Friday, October 11, 2002 10:44 AM To: toasters(a)mathworks.com Subject: RE: Replacing a SCSI cable Is that really safe? I was always taught never to connect or disconnect a SCSI cable on a powered-up system due to the possibility of damaging the SCSI controller, and I've actually seen that happen on a sparcstation once. Do the netapps and the tape drives have some additional technology that allows hot-swapping the scsi cable? -- Mike Sphar - Sr Systems Administrator - Remedy Corporation -----Original Message----- From: Mike Ball [mailto:MBall@datalink.com] Sent: Friday, October 11, 2002 7:36 AM To: 'igor(a)txc.com'; toasters(a)mathworks.com Subject: RE: Replacing a SCSI cable Igor, You can hot swap the cable. I would sure no backup jobs are running on the Netapp and if you are using NDMP make sure you turn it off (ndmpd off) before swapping cables. It should work fine. Mike -----Original Message----- From: Igor Schein [mailto:igor@txc.com] Sent: Wednesday, October 09, 2002 6:05 PM To: toasters(a)mathworks.com Subject: Replacing a SCSI cable Hi, what is the current recommendation as far as replacing a SCSI cable connecting the filer and the tape library? Does filer need to be rebooted, or is it safe to hot-swap the cable? Thanks Igor

1 0

RE: rateup from filer-mrtg.tar.gz from Netapp core dumps under li nux
by Daniel Finn 11 Oct '02

11 Oct '02

Thanks for the help. I put your rateup in place and I'm still getting errors. Although they aren't very helpful to me: [root@sadqalx38 mrtg-bin]# /var/www/html/netapps/bin/mrtg-filer-stats.sh na1m-be.studentadvantage.com password + SERVER=na1m-be.studentadvantage.com + PORT=password + USER= + PASSWD= + MRTG_HOME=/var/www/html/netapps/mrtg-bin + MRTG_BIN=/var/www/html/netapps/mrtg-bin + FILER_STATS_HOME=/var/www/html/netapps + BASE_WORKDIR=/var/www/html/netapps/monitor + CONF=/var/www/html/netapps/conf/na1m-be.studentadvantage.com.cfg + INDEX_FILE=/var/www/html/netapps/monitor/na1m-be.studentadvantage.com/index. html + TITLE=Filer statistics for 'na1m-be.studentadvantage.com' + REGEX=na1m-be.studentadvantage.com + /var/www/html/netapps/bin/retrieve-filer.sh na1m-be.studentadvantage.com + SERVER=na1m-be.studentadvantage.com + FILER_ASCII_PORT= + USERNAME= + PASSWD= + FILER_STATS_HOME=/var/www/html/netapps + PATH=/bin:/usr/bin:/usr/local/bin:/opt/gnu/bin:/var/www/html/netapps/bin: + export PATH + DATA_FILE=/var/www/html/netapps/data/retrieve-filer-na1m-be.studentadvantage .com.dat + GNU_EGREP= + RCMD=rsh + echo Name: na1m-be.studentadvantage.com + retrieve-cpu.pl na1m-be.studentadvantage.com + /var/www/html/netapps/mrtg-bin/mrtg /var/www/html/netapps/conf/na1m-be.studentadvantage.com.cfg PROBLEM: rateup died from Signal 8 with Exit Value 0 when doing router 'na1m-be.studentadvantage.com.net.snmp' If this happens all the time, you should probably investigate the cause. :-) PROBLEM: rateup died from Signal 8 with Exit Value 0 when doing router 'na1m-be.studentadvantage.com.nfs.snmp' If this happens all the time, you should probably investigate the cause. :-) PROBLEM: rateup died from Signal 8 with Exit Value 0 when doing router 'na1m-be.studentadvantage.com.cpu' If this happens all the time, you should probably investigate the cause. :-) PROBLEM: rateup died from Signal 8 with Exit Value 0 when doing router 'na1m-be.studentadvantage.com.cifs.snmp' If this happens all the time, you should probably investigate the cause. :-) PROBLEM: rateup died from Signal 8 with Exit Value 0 when doing router 'na1m-be.studentadvantage.com.cifsothers.snmp' If this happens all the time, you should probably investigate the cause. :-) PROBLEM: rateup died from Signal 8 with Exit Value 0 when doing router 'na1m-be.studentadvantage.com.net.interface1' If this happens all the time, you should probably investigate the cause. :-) PROBLEM: rateup died from Signal 8 with Exit Value 0 when doing router 'na1m-be.studentadvantage.com.net.interface2' If this happens all the time, you should probably investigate the cause. :-) PROBLEM: rateup died from Signal 8 with Exit Value 0 when doing router 'na1m-be.studentadvantage.com.net.interface3' If this happens all the time, you should probably investigate the cause. :-) PROBLEM: rateup died from Signal 8 with Exit Value 0 when doing router 'na1m-be.studentadvantage.com.net.interface4' If this happens all the time, you should probably investigate the cause. :-) PROBLEM: rateup died from Signal 8 with Exit Value 0 when doing router 'na1m-be.studentadvantage.com.net.interface5' If this happens all the time, you should probably investigate the cause. :-) PROBLEM: rateup died from Signal 8 with Exit Value 0 when doing router 'na1m-be.studentadvantage.com.df.vol1' If this happens all the time, you should probably investigate the cause. :-) PROBLEM: rateup died from Signal 8 with Exit Value 0 when doing router 'na1m-be.studentadvantage.com.df.vol0' If this happens all the time, you should probably investigate the cause. :-) + /var/www/html/netapps/mrtg-bin/indexmaker /var/www/html/netapps/conf/na1m-be.studentadvantage.com.cfg Filer statistics for 'na1m-be.studentadvantage.com' na1m-be.studentadvantage.com + exit 0 any ideas what Signal 8 is. The binary itself runs, which is better than before. [root@sadqalx38 mrtg-bin]# ./rateup ./rateup for mrtg 2.9.4 Usage: ./rateup directory basename [sampletime] [t sampletime] [-(t)ransparent] [u|a|g|h|m in out abs_max] [i/p file maxvi maxvo maxx maxy growright step bits] any other ideas as to what the problem could be? Thanks Dan -----Original Message----- From: Crass, Kevin To: 'Daniel Finn' Sent: 10/10/02 6:08 PM Subject: RE: rateup from filer-mrtg.tar.gz from Netapp core dumps under li nux Dan, I created one for Linux for a laptop project I was working on. You can take it from my distribution attached. Regards, Kevin Crass Network Appliance, Inc. Professional Services Engineer -----Original Message----- From: Daniel Finn [mailto:DFinn@studentadvantage.com] Sent: Thursday, October 10, 2002 4:31 PM To: 'toasters(a)mathworks.com' Subject: rateup from filer-mrtg.tar.gz from Netapp core dumps under linux Did anybody else have problems with this? It runs fine on a Solaris9 server but when I tried to install it on one of our linux utility servers here the rateup program would core dump. It's RedHat 6.2 running kernel 2.2.19-6.2.1smp, i686.. I would prefer to run it on the linux server so any help would be really appreciated. Thanks Dan <<mrtg.tar.Z>>

1 0

RE: Replacing a SCSI cable
by Mike Sphar 11 Oct '02

11 Oct '02

Is that really safe? I was always taught never to connect or disconnect a SCSI cable on a powered-up system due to the possibility of damaging the SCSI controller, and I've actually seen that happen on a sparcstation once. Do the netapps and the tape drives have some additional technology that allows hot-swapping the scsi cable? -- Mike Sphar - Sr Systems Administrator - Remedy Corporation -----Original Message----- From: Mike Ball [mailto:MBall@datalink.com] Sent: Friday, October 11, 2002 7:36 AM To: 'igor(a)txc.com'; toasters(a)mathworks.com Subject: RE: Replacing a SCSI cable Igor, You can hot swap the cable. I would sure no backup jobs are running on the Netapp and if you are using NDMP make sure you turn it off (ndmpd off) before swapping cables. It should work fine. Mike -----Original Message----- From: Igor Schein [mailto:igor@txc.com] Sent: Wednesday, October 09, 2002 6:05 PM To: toasters(a)mathworks.com Subject: Replacing a SCSI cable Hi, what is the current recommendation as far as replacing a SCSI cable connecting the filer and the tape library? Does filer need to be rebooted, or is it safe to hot-swap the cable? Thanks Igor

1 0

RE: Replacing a SCSI cable
by Mike Ball 11 Oct '02

11 Oct '02

Igor, You can hot swap the cable. I would sure no backup jobs are running on the Netapp and if you are using NDMP make sure you turn it off (ndmpd off) before swapping cables. It should work fine. Mike -----Original Message----- From: Igor Schein [mailto:igor@txc.com] Sent: Wednesday, October 09, 2002 6:05 PM To: toasters(a)mathworks.com Subject: Replacing a SCSI cable Hi, what is the current recommendation as far as replacing a SCSI cable connecting the filer and the tape library? Does filer need to be rebooted, or is it safe to hot-swap the cable? Thanks Igor

1 0

Re: Hello - new (old) F630 owner
by mds＠gbnet.net 11 Oct '02

11 Oct '02

The key is the converter frob to allow a DIFF card to drive SE disks. Change card, change disks (and shelf) or get the converter frob. -- -Mark ... an Englishman in London ...

1 0

rateup from filer-mrtg.tar.gz from Netapp core dumps under linux
by Daniel Finn 10 Oct '02

10 Oct '02

Did anybody else have problems with this? It runs fine on a Solaris9 server but when I tried to install it on one of our linux utility servers here the rateup program would core dump. It's RedHat 6.2 running kernel 2.2.19-6.2.1smp, i686.. I would prefer to run it on the linux server so any help would be really appreciated. Thanks Dan

1 0

Two patches for netapp-top.pl
by Daniel Scheibli 10 Oct '02

10 Oct '02

Dear list, I have done two small patches for the netapp-top.pl script (http://now.netapp.com/NOW/download/tools/ntaptop/), which can be found at (http://www.edelbyte.org/html/s05c000m.htm in the patches section). The first one fixes an error when displaying hostsnames which can not be resolved, the other one limits the interval recalculation to more relevant cases. Hope you like it Daniel -- +++ GMX - Mail, Messaging & more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr für 1 ct/ Min. surfen!

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters