toasters

toasters@lists.teaparty.net

13531 discussions

RE: sem-OT : rj45->db9 pin-out to connect to netapps console port
by DFinn＠studentadvantage.com 20 May '03

20 May '03

That's strange. I tried one of those and it didn't work. It's a black rj45->db9 connector labeled TERMINAL and it's the one I was using to attach to the serial port of a laptop to console into the cisco. I know the console port on the netapp works fine though because I can get into that with a serial cable and a laptop. -----Original Message----- From: Jason.Santos(a)pinnaclewest.com To: DFinn(a)studentadvantage.com Sent: 5/19/03 1:52 PM Subject: RE: sem-OT : rj45->db9 pin-out to connect to netapps console port They are pinned out the same as the adapters that came with the 2511 (labeled Terminal, I think). I have some at home, don't have one here, I can e-mail you later if you still didn't find it. -- Jason Santos Sr. Unix System Administrator APS/Pinnacle West Phoenix, AZ USA -----Original Message----- From: DFinn(a)studentadvantage.com [mailto:DFinn@studentadvantage.com] Sent: Monday, May 19, 2003 10:32 AM To: toasters(a)mathworks.com Subject: sem-OT : rj45->db9 pin-out to connect to netapps console port I've decided to try and use the Cisco 2511-RJ that we currently have in place for our sun gear and connect the netapps to that for network console connections. I picked up some rj45->db9 connectors that need to be pin'd out. Does anyone know how these are pin'd out offhand? Thanks Dan

2 1

useradmin command
by Robert Borowicz 20 May '03

20 May '03

I'm using the "useradmin" command to add users to my DOT 6.3.1 for CIFS authen since I don't have a DC. Unfortunately these users also become Filer Administrators and I have to be very careful not to let them onto the box. I'm looking at how to handle password administration for these users without letting them have a telnet session. Anybody use a "rsh" script to administers these user accounts? Any ideas how I can limit them? The only thing I've come up with is having our manned Help Desk administer a telnet session for them while the user is physically in the Help Desk area. Ideas? -Bob

1 0

Blast from the past. 5.3.1D9
by Jaye Mathisen 19 May '03

19 May '03

I have an old filer that we just didn't do much with. I powered it up, and it's crashing with a panic in wafl. Read a bug report that it is fixed in 5.3.1D9. The filer has 5.3.1 on it. I have the 5.3.1D9 tar files and stuff, but I believe the install uses the regular 5.3.1 disks. Are there any ways to get the 5.3.1D9 kernel on the floppy so I can boot it and let the wafl log finish getting replayed? There's nothing on there that's too critical, but I just want to double check.

1 0

RE: sem-OT : rj45->db9 pin-out to connect to netapps console port
by Reeves, Gary 19 May '03

19 May '03

Try this works for me Computers and terminals are typically DTE (Data Terminal Equipment) devices. DTE Adapter Wiring DB-9 DB-25 Signal Function Adapter RJ-45 8 5 CTS Clear To Send Blue 1 1 8 DCD Data Carrier Detect Orange 2 2 3 RD Received Data Black 3 5 7 SG Signal Ground Red 4 5 7 SG Signal Ground Green 5 3 2 TD Transmitted Data Yellow 6 4 20 DTR Data Terminal Ready Brown 7 7 4 RTS Request To Send White 8 6 6 DSR Data Set Ready - - (see notes below ) 9 22 RI Ring Indicator - - ( probably forget this one ) Some DTE devices require the DSR (Data Set Ready) signal. This signal is usually provided by the DCE device. If you have a DTE device (such as a terminal) that requires the DSR signal, wire pins 20 and 6 (4 and 6 on a DB-9 connector) together. This way, the DTE device will receive the DSR signal from itself when it asserts the DTR signal. -----Original Message----- From: DFinn(a)studentadvantage.com [mailto:DFinn@studentadvantage.com] Sent: Mon 19/05/2003 19:55 To: Jason.Santos(a)pinnaclewest.com Cc: toasters(a)mathworks.com Subject: RE: sem-OT : rj45->db9 pin-out to connect to netapps console port That's strange. I tried one of those and it didn't work. It's a black rj45->db9 connector labeled TERMINAL and it's the one I was using to attach to the serial port of a laptop to console into the cisco. I know the console port on the netapp works fine though because I can get into that with a serial cable and a laptop. -----Original Message----- From: Jason.Santos(a)pinnaclewest.com To: DFinn(a)studentadvantage.com Sent: 5/19/03 1:52 PM Subject: RE: sem-OT : rj45->db9 pin-out to connect to netapps console port They are pinned out the same as the adapters that came with the 2511 (labeled Terminal, I think). I have some at home, don't have one here, I can e-mail you later if you still didn't find it. -- Jason Santos Sr. Unix System Administrator APS/Pinnacle West Phoenix, AZ USA -----Original Message----- From: DFinn(a)studentadvantage.com [mailto:DFinn@studentadvantage.com] Sent: Monday, May 19, 2003 10:32 AM To: toasters(a)mathworks.com Subject: sem-OT : rj45->db9 pin-out to connect to netapps console port I've decided to try and use the Cisco 2511-RJ that we currently have in place for our sun gear and connect the netapps to that for network console connections. I picked up some rj45->db9 connectors that need to be pin'd out. Does anyone know how these are pin'd out offhand? Thanks Dan

1 0

RE: snapshot appearing in qtree
by Dell, Mary 19 May '03

19 May '03

Legato creates that directory on my volumes even when I'm not using snapshots. Anyway Legato backs up by creating a snapshot and then backing up the snapshot and then it (supposedly) deletes the snap, but if it fails mid-backup it might leave it out there. I assume other backup software works similarly. Not sure how to get rid of it. With at least one version of Ontap, trying to delete the contents of that folder panics the filer, so think twice before trying that! I found that out the hard way. Mary Dell -----Original Message----- From: Maglinger, Paul [mailto:PMAGLINGER@scvl.com] Sent: Monday, May 19, 2003 2:00 PM To: 'NetApps list server' Subject: snapshot appearing in qtree We have a 740 filer running 6.3.1R1 with NFS shares to a Tru64 Unix 5.1a cluster. We have a directory on the Unix machine mounted to a folder on vol0 on the filer. When I do a df -k against the mount on the Unix system, it shows that it is nearly full. I cd into the mount and see a .snapshot directory with entries from June 12th 2002. When I turn snapshots on, I can't see any snapshots directory or folders in Windows Explorer. I can't see these snapshots from filerview either. If I unmount the directory, it shows empty so I know that it believes the filer directory is almost full. What's doing this and how can I correct? Our glory is not in never falling, but rising every time we fall. Paul Maglinger, A+, CA, CCA, CET, MCSE Systems Administrator Shoe Carnival Inc. (812)867-4674 pmaglinger(a)scvl.com This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Confidential, proprietary or time-sensitive communications should not be transmitted via the Internet, as there can be no assurance of actual or timely delivery, receipt and/or confidentiality. This is not an offer, or solicitation of any offer to buy or sell any security, investment or other product.

1 0

snapshot appearing in qtree
by Maglinger, Paul 19 May '03

19 May '03

We have a 740 filer running 6.3.1R1 with NFS shares to a Tru64 Unix 5.1a cluster. We have a directory on the Unix machine mounted to a folder on vol0 on the filer. When I do a df -k against the mount on the Unix system, it shows that it is nearly full. I cd into the mount and see a .snapshot directory with entries from June 12th 2002. When I turn snapshots on, I can't see any snapshots directory or folders in Windows Explorer. I can't see these snapshots from filerview either. If I unmount the directory, it shows empty so I know that it believes the filer directory is almost full. What's doing this and how can I correct? Our glory is not in never falling, but rising every time we fall. Paul Maglinger, A+, CA, CCA, CET, MCSE Systems Administrator Shoe Carnival Inc. (812)867-4674 pmaglinger(a)scvl.com

1 0

RE: REDUCE the size of a VLD running Exchange
by Charles Roufay 19 May '03

19 May '03

I copied it directly from the console so no typo error. here is a df -r bwnlfs01> df -r Filesystem kbytes used avail reserved Mounted on /vol/VLD_EXData/ 169154752 44206916 0 124947836 /vol/VLD_EXData/ /vol/VLD_EXData/.snapshot 18794972 0 18794972 0 /vol/VLD_EXData/.snapshot regards Charles -----Original Message----- From: Chris Thompson [mailto:cet1@cus.cam.ac.uk] Sent: maandag 19 mei 2003 16:28 To: Charles Roufay Cc: victor.olsen(a)proact.no; toasters(a)mathworks.com Subject: Re: REDUCE the size of a VLD running Exchange Charles.Roufay(a)bluewater-group.com writes: > > here is a df from the volume > > > Filesystem kbytes used avail capacity Mounted on > /vol/VLD_EXData/ 169154752 44207168 0 26% > /vol/VLD_EXData/ > /vol/VLD_EXData/.snapshot 18794972 0 8794972 0% > /vol/VLD_EXData/.snapshot > > we seem to have enough space That looks mighty strange output from "df". The sizes are right for a (3+1) x 72GB volume with 10% snapshot reserve, but the used/avail values make no sense to me. Is the "avail" for /vol/VLD_EXData/.snapshot really 18794972 rather than 8794972 (that could be a transcription error), which would be consistent with there being no snapshots. Is that what "snap list VLD_EXData" says? I don't know what to make of the zero avail figure for the active filing system ... Chris Thompson Email: cet1 [at] cam.ac.uk

2 1

sem-OT : rj45->db9 pin-out to connect to netapps console port
by DFinn＠studentadvantage.com 19 May '03

19 May '03

I've decided to try and use the Cisco 2511-RJ that we currently have in place for our sun gear and connect the netapps to that for network console connections. I picked up some rj45->db9 connectors that need to be pin'd out. Does anyone know how these are pin'd out offhand? Thanks Dan

1 0

RE: REDUCE the size of a VLD running Exchange
by Charles Roufay 19 May '03

19 May '03

here is a df from the volume Filesystem kbytes used avail capacity Mounted on /vol/VLD_EXData/ 169154752 44207168 0 26% /vol/VLD_EXData/ /vol/VLD_EXData/.snapshot 18794972 0 8794972 0% /vol/VLD_EXData/.snapshot we seem to have enough space regards charles -----Original Message----- From: Victor Olsen [mailto:victor.olsen@proact.no] Sent: maandag 19 mei 2003 13:50 To: Charles Roufay; toasters(a)mathworks.com Subject: RE: REDUCE the size of a VLD running Exchange Hi, I think you are out of luck and will have to add more disks. You need to have available space > 0 to create snapshots on a volume. And reserved space does not count as available space. Regards, Victor -----Original Message----- From: Charles Roufay [mailto:Charles.Roufay@bluewater-group.com] Sent: 19. mai 2003 13:24 To: toasters(a)mathworks.com Subject: REDUCE the size of a VLD running Exchange Hi, Is anyone aware of a way I could reduce the size of a VLD using snapdrive? It is preventing snapdrive from creating snapshots and we do not want to add more disk to the volume. Any ideas? Charles Roufay Sr Network Administrator Bluewater Energy Services B.V Marsstraat 33 2132 HR Hoofddorp Netherlands Tel 023 568 2800 - www.bluewater.nl

2 1

Filer F840 Network Path?
by Helberth Alexis Osorio O. 19 May '03

19 May '03

I have a F840 on Windows NT Domain? Wheni try to mapping the path C$ or any other path of the filer, the system cannot find the network path. In the administrative Tools, "Server Manager" i see the computer, type and description, selecting the computer and properties i receive the next message: "The network path was not found", please anybody can help me. Thank you very much. Helberth Alexis Osorio O. Professional Services Manager Information Technologies de Colombia "INTEK" Teléfono: (57-1)6206370 ext 15 Fax: (57-1)6206365 Celular: (57-315)3108457 Santafé de Bogotá, D.C. Colombia www.intek.com.co STORAGETEK INFORMATION made POWERFUL

2 1

RE: Filer F840 Network Path?
by Charles Roufay 19 May '03

19 May '03

is DNS enabled? the command dns info will tell you if not ? then type qtree to see what security type you are using (ntfs or unix) charles -----Original Message----- From: Helberth Alexis Osorio O. [mailto:alexis.osorio@intek.com.co] Sent: maandag 19 mei 2003 15:44 To: Charles Roufay Subject: RE: Filer F840 Network Path? yes i can see the cifs shares and i´m using IP address. Maybe the security style of the shares? -----Mensaje original----- De: Charles Roufay [mailto:Charles.Roufay@bluewater-group.com] Enviado el: Lunes, 19 de Mayo de 2003 08:40 a.m. Para: 'alexis.osorio(a)intek.com.co' Asunto: RE: Filer F840 Network Path? Hello, Is the C$ visible when you run cifs shares command on the filer through the console? Are you mapping using the hostname or the ip address? (use ip address if DNS is not setup)? Regards charles -----Original Message----- From: Helberth Alexis Osorio O. [mailto:alexis.osorio@intek.com.co] Sent: maandag 19 mei 2003 15:24 To: NetApp List (E-mail) Subject: Filer F840 Network Path? I have a F840 on Windows NT Domain? Wheni try to mapping the path C$ or any other path of the filer, the system cannot find the network path. In the administrative Tools, "Server Manager" i see the computer, type and description, selecting the computer and properties i receive the next message: "The network path was not found", please anybody can help me. Thank you very much. Helberth Alexis Osorio O. Professional Services Manager Information Technologies de Colombia "INTEK" Teléfono: (57-1)6206370 ext 15 Fax: (57-1)6206365 Celular: (57-315)3108457 Santafé de Bogotá, D.C. Colombia www.intek.com.co STORAGETEK INFORMATION made POWERFUL

1 0

Replacing a PSU on a DS-14
by Paul McGuinness (ext. 771) 19 May '03

19 May '03

Hi, quick question. I have a DS-14 shelf on an F720, DOT 6.3.1, with one failed power supply (second one still running fine allbeit getting a bit warm). Replacement is on the way. Is this hot swappable? Thanks -----Original Message----- From: Bob Borowicz [mailto:rbaus@swbell.net] Sent: 17 May 2003 17:34 To: toasters(a)mathworks.com Subject: Re: CIFS/NFS cross authentication Thanks Mark, i'll check it out. This is what I'm finding out the hard way... User ACL's on a NFS mount? Wow... Doing mixed security makes for strange behaviours... And for me without a Domain Controller opens the door to the "useradmin" user db which is a whole nother ball of wax... Thanks for the article. -Bob Muhlestein, Mark wrote: > If the files in a mixed or ntfs qtree have ACLs you have to be able to > map the NFS cred to a CIFS cred. That is described on the NOW site: > > http://now.netapp.com/NOW/knowledge/docs/olio/guides/53_troubleshooting/ > index.shtml > > See particularly the section on the user map file. You can test the > mappings by turning on the cifs.trace_login option and doing a "wcc -u > <uid>" filer command. > > Mark > > -----Original Message----- > From: Robert Borowicz [mailto:rbaus@swbell.net] > Sent: Friday, May 16, 2003 12:45 PM > To: toasters(a)mathworks.com > Subject: CIFS/NFS cross authentication > > OK folks my brain is smoking... Or perhaps its *what* I'm smoking that's > > doing it... > > I'm trying to do a Mixed security qtree called "dlogs". My webmaster > runs > "Webtrends" on the access logs of our Webserver to gen stats for the big > > whigs. Whopp Dee Do.... So I want a NFS dir to dump the logs off of the > > Unix Webserver and then give her access on her PC where Webtrends is. > > So I create a qtree called "dlogs", and add the dir to /etc/exports and > do > a "cifs share dlogs" etc... I delete "everybody/Full Control" and add > just > the folks I want to have access to on the PC side. > > So the PC side works great. And the NFS side works fine with the mount > command but when I try and "cd" into the dir on the remote host I get a > "permission denied". > > Anybody have this problem already? > > Thanks > > -Bob B. > > ************************************************************************** The information contained in this e-mail is confidential, may be privileged and is intended only for the use of the recipient named above. If you are not the intended recipient or a representative of the intended recipient, you have received this e-mail in error and must not copy, use or disclose the contents of this email to anybody else. If you have received this e-mail in error, please notify the sender immediately by return e-mail and permanently delete the copy you received. This email has been swept for computer viruses. However, you should carry out your own virus checks. Registered in Ireland, No. 205721. http://www.FINEOS.com **************************************************************************

2 1

FAS940 mapping drives?
by Helberth Alexis Osorio O. 19 May '03

19 May '03

Hi, i´ve got a problems with a FAS940 registered on Windows NT domain. When i use the quick setup to start the use the Filer, i do the changes to register the Domain with out any problems. I go to the Administrative Tools, Server Manager and i can see the Computer registered in the Domain but with out description, when i try to obtain properties of the computer i receive the next message "Access is denied". Checking the configuration the domain is "workgroup" and isn´t my domain "EPM_BOG", i execute again the quick setup and cifs setup, but the problem is the same. Any comments? Helberth Alexis Osorio O. Professional Services Manager Information Technologies de Colombia "INTEK" Teléfono: (57-1)6206370 ext 15 Fax: (57-1)6206365 Celular: (57-315)3108457 Santafé de Bogotá, D.C. Colombia www.intek.com.co STORAGETEK INFORMATION made POWERFUL

1 0

RE: REDUCE the size of a VLD running Exchange
by Victor Olsen 19 May '03

19 May '03

Hi, I think you are out of luck and will have to add more disks. You need to have available space > 0 to create snapshots on a volume. And reserved space does not count as available space. Regards, Victor -----Original Message----- From: Charles Roufay [mailto:Charles.Roufay@bluewater-group.com] Sent: 19. mai 2003 13:24 To: toasters(a)mathworks.com Subject: REDUCE the size of a VLD running Exchange Hi, Is anyone aware of a way I could reduce the size of a VLD using snapdrive? It is preventing snapdrive from creating snapshots and we do not want to add more disk to the volume. Any ideas? Charles Roufay Sr Network Administrator Bluewater Energy Services B.V Marsstraat 33 2132 HR Hoofddorp Netherlands Tel 023 568 2800 - www.bluewater.nl

1 0

REDUCE the size of a VLD running Exchange
by Charles Roufay 19 May '03

19 May '03

Hi, Is anyone aware of a way I could reduce the size of a VLD using snapdrive? It is preventing snapdrive from creating snapshots and we do not want to add more disk to the volume. Any ideas? Charles Roufay Sr Network Administrator Bluewater Energy Services B.V Marsstraat 33 2132 HR Hoofddorp Netherlands Tel 023 568 2800 - www.bluewater.nl

1 0

Re: CIFS/NFS cross authentication
by Bob Borowicz 17 May '03

17 May '03

Thanks Mark, i'll check it out. This is what I'm finding out the hard way... User ACL's on a NFS mount? Wow... Doing mixed security makes for strange behaviours... And for me without a Domain Controller opens the door to the "useradmin" user db which is a whole nother ball of wax... Thanks for the article. -Bob Muhlestein, Mark wrote: > If the files in a mixed or ntfs qtree have ACLs you have to be able to > map the NFS cred to a CIFS cred. That is described on the NOW site: > > http://now.netapp.com/NOW/knowledge/docs/olio/guides/53_troubleshooting/ > index.shtml > > See particularly the section on the user map file. You can test the > mappings by turning on the cifs.trace_login option and doing a "wcc -u > <uid>" filer command. > > Mark > > -----Original Message----- > From: Robert Borowicz [mailto:rbaus@swbell.net] > Sent: Friday, May 16, 2003 12:45 PM > To: toasters(a)mathworks.com > Subject: CIFS/NFS cross authentication > > OK folks my brain is smoking... Or perhaps its *what* I'm smoking that's > > doing it... > > I'm trying to do a Mixed security qtree called "dlogs". My webmaster > runs > "Webtrends" on the access logs of our Webserver to gen stats for the big > > whigs. Whopp Dee Do.... So I want a NFS dir to dump the logs off of the > > Unix Webserver and then give her access on her PC where Webtrends is. > > So I create a qtree called "dlogs", and add the dir to /etc/exports and > do > a "cifs share dlogs" etc... I delete "everybody/Full Control" and add > just > the folks I want to have access to on the PC side. > > So the PC side works great. And the NFS side works fine with the mount > command but when I try and "cd" into the dir on the remote host I get a > "permission denied". > > Anybody have this problem already? > > Thanks > > -Bob B. > >

1 0

RE: CIFS home directory umask
by Muhlestein, Mark 17 May '03

17 May '03

Yes, if you are running ONTAP 6.2.1 or later. Issue a command like this: Filer> cifs shares -change cifs.homedir -umask 111 You may also want to use 133 to remove WRITE from group and other. Note that this umask also affects directory creation by CIFS clients. Mark -----Original Message----- From: Charles Bartels [mailto:cbartels@openharbor.com] Sent: Friday, May 16, 2003 11:22 AM To: toasters(a)mathworks.com Subject: CIFS home directory umask Hi Folks, Is it possible to set the umask on home directory "shares" in a UNIX security style qtree? Right now if a user creates a file from a pc the "execute" bit is set (755, -rwxr-xr-x) -C.

1 0

��L��I�K�^�p��[!��ɍ��Ă�E��E�^�C��グ��I
by saifuxa0516 16 May '03

16 May '03

<��M��>DMmaster http://dmmster.com <��Ǝ�>��c�K�� http://dj.st36.arena.ne.jp/lucky/ �z�M��~��p�A�h��X�@donot@24i.net �z�M��~�葱��24��ԂŔ��f��܂� ��z�M�͑��M�Ɋւ��菤�\��`��K��ɑ��著�M��Ă��܂��B �Q�Q�Q�Q�Q�Q�Q�Q�Q�Q�Q�Q�Q�y�L��z�Q�Q�Q�Q�Q�Q�Q�Q�Q�Q�Q�Q�Q ��K�^�O�b�c�� Q�Q�Q�Q�Q�Q�Q�Q�Q�Q�s��t�Q�Q�Q�Q�Q�Q�Q�Q�Q�Q �\�̉��F��z�Ȃǂ��i�Ł� ��i�Ȃ��Ȃ莟��I��܂��I ��̏��I�撅�R�Q��l�I�Ȃ��Ȃ�O�ɂƂ肠��ɂ��ā� http://dj.st36.arena.ne.jp/lucky/ �z�[��y�[�W��Ă��܂��ꂪ��܂��̂ł��߂ɁE�E�E�B

1 0

CIFS/NFS cross authentication
by Robert Borowicz 16 May '03

16 May '03

OK folks my brain is smoking... Or perhaps its *what* I'm smoking that's doing it... I'm trying to do a Mixed security qtree called "dlogs". My webmaster runs "Webtrends" on the access logs of our Webserver to gen stats for the big whigs. Whopp Dee Do.... So I want a NFS dir to dump the logs off of the Unix Webserver and then give her access on her PC where Webtrends is. So I create a qtree called "dlogs", and add the dir to /etc/exports and do a "cifs share dlogs" etc... I delete "everybody/Full Control" and add just the folks I want to have access to on the PC side. So the PC side works great. And the NFS side works fine with the mount command but when I try and "cd" into the dir on the remote host I get a "permission denied". Anybody have this problem already? Thanks -Bob B.

1 0

CIFS home directory umask
by Charles Bartels 16 May '03

16 May '03

Hi Folks, Is it possible to set the umask on home directory "shares" in a UNIX security style qtree? Right now if a user creates a file from a pc the "execute" bit is set (755, -rwxr-xr-x) -C.

1 0

has anyone seen this before? Garbled names on a bunch of director ies
by Hight, Steve - Perot 16 May '03

16 May '03

We're seeing garbled names on a bunch of directories on our F880. It looks like the problem is primarily isolated to directory names but there may be a few files that have it, too. The output is the same regardless of the terminal emulator used. I don't know what created or creates these dir's, but I'm wondering if anyone out there has ever seen anything like this: -rw-rw-rw- 1 prodapp prodapp 819 Mar 12 15:36 zz999dt.6836 -rw-rw-rw- 1 prodapp prodapp 819 Mar 12 15:41 zz999dt.6839 drwxrwxrwx 2 prodapp prodapp 4096 Dec 30 17:22 ? drwxrwxrwx 2 prodapp prodapp 4096 Jan 24 12:55 ?a drwxrwxrwx 2 prodapp prodapp 4096 Oct 10 2002 ?ìè drwxrwxrwx 2 prodapp prodapp 4096 Dec 30 16:47 ?° drwxrwxrwx 2 prodapp prodapp 4096 Oct 10 2002 ^i0 drwxrwxrwx 2 prodapp prodapp 4096 Jan 8 21:53 ^i` drwxrwxrwx 2 prodapp prodapp 4096 Dec 18 14:34 ^w drwxrwxrwx 2 prodapp prodapp 4096 Jan 8 22:19 ?à drwxrwxrwx 2 prodapp prodapp 4096 Mar 3 14:10 ?&p drwxrwxrwx 2 prodapp prodapp 4096 Jan 3 13:10 ?l drwxrwxrwx 2 prodapp prodapp 4096 Mar 3 15:47 ?à drwxrwxrwx 2 prodapp prodapp 4096 Mar 5 10:57 ?"è drwxrwxrwx 2 prodapp prodapp 4096 Jan 7 17:51 ?³x drwxrwxrwx 2 prodapp prodapp 4096 Jan 10 09:08 S h drwxrwxrwx 2 prodapp prodapp 4096 Jan 2 09:25 S^Lh drwxrwxrwx 2 prodapp prodapp 4096 Dec 30 16:28 S@ drwxrwxrwx 2 prodapp prodapp 4096 Jan 13 19:31 S8 drwxrwxrwx 2 prodapp prodapp 4096 Mar 12 16:50 Sà drwxrwxrwx 2 prodapp prodapp 4096 Jan 15 08:22 S@ drwxrwxrwx 2 prodapp prodapp 4096 Dec 28 13:39 Sp drwxrwxrwx 2 prodapp prodapp 4096 Jan 17 13:01 S( drwxrwxrwx 2 prodapp prodapp 4096 Dec 28 14:57 S*` drwxrwxrwx 2 prodapp prodapp 4096 Jan 2 16:41 S9° drwxrwxrwx 2 prodapp prodapp 4096 Jan 14 09:56 S:@ drwxrwxrwx 2 prodapp prodapp 4096 Dec 27 08:15 S>h drwxrwxrwx 2 prodapp prodapp 4096 Jan 15 16:59 Sch drwxrwxrwx 2 prodapp prodapp 4096 Dec 24 08:22 Sñ drwxrwxrwx 2 prodapp prodapp 4096 Dec 12 18:55 Sö drwxrwxrwx 2 prodapp prodapp 4096 Jan 8 14:00 Stà drwxrwxrwx 2 prodapp prodapp 4096 Dec 16 17:32 S× drwxrwxrwx 2 prodapp prodapp 4096 Feb 14 10:15 <° drwxrwxrwx 2 prodapp prodapp 4096 Jan 9 17:06 <$ drwxrwxrwx 2 prodapp prodapp 4096 Apr 14 17:52 <ó° drwxrwxrwx 2 prodapp prodapp 4096 Dec 26 21:24 <"ð drwxrwxrwx 2 prodapp prodapp 4096 Jan 15 12:34 <§ drwxrwxrwx 2 prodapp prodapp 4096 Dec 19 11:11 <²¨ drwxrwxrwx 2 prodapp prodapp 4096 Mar 10 09:09 OE]0 drwxrwxrwx 2 prodapp prodapp 4096 Mar 27 11:15 OE]8 drwxrwxrwx 2 prodapp prodapp 4096 Jan 7 10:33 OEéø drwxrwxrwx 2 prodapp prodapp 4096 Jan 15 16:52 tø drwxrwxrwx 2 prodapp prodapp 4096 Jan 8 11:04 ý drwxrwxrwx 2 prodapp prodapp 4096 Jan 22 12:18 z~ drwxrwxrwx 2 prodapp prodapp 4096 Jan 14 11:15 <è drwxrwxrwx 2 prodapp prodapp 4096 Jan 13 19:13 rð drwxrwxrwx 2 prodapp2 prodapp 4096 Apr 30 10:48 ú drwxrwxrwx 2 prodapp prodapp 4096 Mar 10 09:50 ¾1ð drwxrwxrwx 2 prodapp prodapp 4096 Mar 13 16:23 ¾1è drwxrwxrwx 2 prodapp prodapp 4096 Mar 3 14:11 ¾1° drwxrwxrwx 2 prodapp prodapp 4096 Mar 12 15:42 ¾1¸ drwxrwxrwx 2 prodapp prodapp 4096 Oct 10 2002 ¾2 drwxrwxrwx 2 prodapp prodapp 4096 Dec 30 15:46 ¾2 drwxrwxrwx 2 prodapp prodapp 4096 Jan 3 10:26 ¾2( drwxrwxrwx 2 prodapp prodapp 4096 Jan 10 16:39 ¾20 drwxrwxrwx 2 prodapp2 prodapp 4096 Apr 30 10:52 ¾` drwxrwxrwx 2 prodapp prodapp 4096 Oct 10 2002 ¾EUR

2 1

ndmpcopyÂ incremental level
by Ilya Birman 16 May '03

16 May '03

It looks like ndmpcpopy has only 3 level on increments.0,1,2. So i run 0 on 13th, 1 on 14th, 2 on 15th. What do I do on 16th? Thanks --------------------------------------------------------------------------- This message (including any attachments) is confidential and may be privileged. If you have received it by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorised use or dissemination of this message in whole or in part is strictly prohibited. Please note that e-mails are susceptible to change. ABN AMRO Bank N.V. (including its group companies) shall not be liable for the improper or incomplete transmission of the information contained in this communication nor for any delay in its receipt or damage to your system. ABN AMRO Bank N.V. (or its group companies) does not guarantee that the integrity of this communication has been maintained nor that this communication is free of viruses, interceptions or interference. ---------------------------------------------------------------------------

2 1

SWEEPSTAKES WINNING NOTIFICATION
by Mr Jossip Welber 15 May '03

15 May '03

ATTN: EL GORDO SWEEPSTAKES N.L BURDENSTRAAT 22 1053 DS AMSTERDAM. THE NETHERLANDS. FROM THE DESK OF THE DIRECTOR INTERNATIONAL PROMOTION/PRIZE AWARD DEPT. REF:WR/2311786008/01 BATCH:14/011/IPD RE:WINNING NOTIFICATION/FINAL NOTICE. We are pleased to inform you of the release today the 14th of May 2003,of the El Gordo Netherlands Sweepstakes International program held on the 29th of december 2002. Your personal or company email address attached to ticket number 205-11465886-629 with serial number 3772-99 drew lucky numbers 7-14-17-23-31-44 which consequently won the lottery in the 2nd category. You have therefore been approved for a lump sum payout of $1,000,000.00(one million dollars) in cash credited to file Ref.No ELG/2311786008/01.This is from a total cash prize of U.S.$11million shared among several international lucky winners in this category. CONGRATULATIONS. Your fund is now deposited with our Security Department to your name and due to mix up of some numbers and names, we ask that you keep this winning private from public notice until your claim has been processed and your money remitted to your designated account.This is part of our security protocol to avoid double claim and unwarranted taking advantage of this programme by participants. All participants were selected through a computer ballot system drawn from over 500,000 company and individual email addresses from all over the world as part of our international promotions programme,which takes place every year. We hope, with part of your winning, you will take part in our end of year stake of U.S $5million international lottery. Remember,all winning must be claimed not later than June 29th 2003. After this date all unclaimed fund will be returned to the pool as unclaimed. NOTE:In order to avoid unnecessary delays and complications please remember to quote your refrence and batch numbers in all correspondence with your agent. Furthermore, should there be any change of address, do inform your agent as soon as possible. Any body under the age of 18 years is automatically disqualified. Congratulations once more from our members of staff and thank you for being part of our promotional programme. Forward your reply the payment officer Mr. Wietze Van Dijk email; (wietze_dijk(a)yahoo.com and fax +31-619-714-412 or telephone +31-617-856-756) Congratulations once again while we await your urgent respons with your full contact details. Sincerely, MR.JOSSIP WELBER (MEMBER OF STAFF)

1 0

network based console connection
by DFinn＠studentadvantage.com 15 May '03

15 May '03

I think it would be really nice to have something like this setup so that we could get console access to our netapps via the network. I'm curious as to what's available and what other people have setup to accomplish this. The cheaper the better. Thanks Dan

6 5

Re: remove .snapshot dir from unwanted top level directory
by collin66＠yahoo.com 15 May '03

15 May '03

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters