toasters

toasters@lists.teaparty.net

13531 discussions

TCP/IP Compression
by Holland, William L 12 May '04

12 May '04

We have need to use SnapMirror over a WAN, currently T-1. Any suggestions on TCP/IP compression products to help minimize the amount of WAN bandwidth needed? Thanks in advance. Bill Holland RM/GFS/GS/ISM US Department of State IT Specialist Voice: (843) 308-5311 IVG: 35311 Fax: (843) 746-0543 IVG: 60543 Network Appliance Storage Associate Microsoft Certified Professional Microsoft Certified Systems Administrator - Windows 2000

2 1

RE: QTree Size limits
by Jack Lyons 12 May '04

12 May '04

The 14 hours window is from filer to tape - a single LTO1 drive via NDMP which I think equates to about 24 MB/s which I think is pretty good?!? We are not using DFS currently, the big question is regards to how does DAVE and/or OSX native SMB handle DFS - I haven't look at it yet. Jack -----Original Message----- From: Skottie Miller [mailto:skottie@anim.dreamworks.com] Sent: Wednesday, May 12, 2004 12:51 PM To: Jack Lyons Cc: 'toasters(a)mathworks.com' Subject: Re: QTree Size limits Jack Lyons wrote: > I have a 1.31 TB volume that is 90% full. There are two solutions I > have available to me. One is to try to reduce the amount of space on > the volume (but meeting resistance by users). The other is to add > space. I am trying to get approval for another TB of disk space, but I > don't think the best solution is to add it to the existing QTree. My > backup window for this volume is 14 -15 hours currently and would only > get bigger if I add space and that is not acceptable. I know I can > another qtree / cifs share but I was hoping I could do it in such a way > that I would still have another Qtree but make it available to the user > via a single CIFS Share. seems you may want to investigate backup system changes; a 14 hour window for a 1.3 TB volume is terrible. what backup product(s) are you using? For reference, we churn 800 - 1.2 TB per night, out of 40 TB online, and the first-phase backup window (filer to stage pools) is 4 - 6 hours long. Then the data moves from staging pool to tape, outside the backup window. We use Tivoli storage manager off three Linux backup servers, doing file-at-a-time differential backups over NFS. > I was hoping I could add another volume, probably /vol/vol2 with a qtree > called /vol/vol2/active clients and some how make it appear to the user > as a subdirectory under \\server\creative <file:///\\server\creative> Do you use DFS to mount shares ? My windows guys think DFS supports nesting shares as you describe. -skottie -- Scott Miller | Animation Technology work: skottie(a)dreamworks.com | Dreamworks Feature Animation life: skottie(a)pobox.com | http://skottie-di.net This email and its contents may be confidential. If it is and you are not the intended recipient, please do not disclose or use the information within this email or its attachments. If you have received this email in error, please delete it immediately. Thank you.

2 1

RE: Size calculations
by Timothy Sesow 12 May '04

12 May '04

Disk manufacturers use decimal-based numbers for disk sizes, so that a 146GByte drive is 146*1000*1000*1000 bytes. I have heard that this is due to legal requirements, but I am not a lawyer. Most software, including DataONTAP, uses 1024*1024*1024 to mean a Gigabyte. So a 146Gbyte disk drive (146*1000*1000*1000) is actually 136GBytes of usable disk space. My impression is that NetApp is one of the few vendors who are actually straight forward about this. On their quotes for new systems, they have a field for "usable space", which is based on 1024*1024*1024 calculations AND they deduct for snapshots. Tim Sesow VP Engineering 303-948-3360 cell 303-809-8070 -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Jack Lyons Sent: Wednesday, May 12, 2004 8:26 AM To: 'toasters(a)mathworks.com' Subject: Size calculations Can you tell me whether or not a TB = 1000 GB or 1024 GB In my volume properties screen: Used Capacity: 1.18 TB % Used: 90% Total Capacity: 1.31 TB But in my Manage Volumes screen it shows I have 127 GB available. 1.31 - 1.18 = .13 TB = 133.12 GB if 1 TB = 1024 GB 1.31 - 1.18 = .13 TB = 130 GB if 1 TB = 1000 GB 127 GB = .127 TB if TB = 1000 GB 127 GB = .130 TB if TB = 1024 GB so it seems that in one screen they use 1 conversion factor and another screen they use a different one. This email and its contents may be confidential. If it is and you are not the intended recipient, please do not disclose or use the information within this email or its attachments. If you have received this email in error, please delete it immediately. Thank you.

3 2

NetApp vulnerable to RPC bug?
by "Allendörfer, Carsten" 12 May '04

12 May '04

Hi, We had several core dumps on our filers today. To be exact those were - 1 node a FAS980c - 1 node a FAS270c - R200 - F760 running 6.5.1. All machines crashed within half an hour with the following message: Panic string: PageFault (write invalid page) on address 0xc7d2e000 (errcode 0x2), eip = 0x713cb1 esp = c1afbd7c ebp = 0xc1afbd84 cs = 8 eflags = 10202 in process SMBRPCWor As those filers are used in different windows domains from different clients I can't think of any normal client that could have caused the crash. Then some hours later I found an article from SANS about a new version of the PhatBot worm seems to include an LSASS exploit code. http://www.incidents.org/diary.php?date=2004-04-27&isc=932fe245375de59f9d00… I don't like the idea, but could OnTAP be vulnerable to a windows exploit? Has anyone else seen this problem? Carsten

2 1

None
by Harbhajan Julka 12 May '04

12 May '04

Hi everybody, Has anyone ever been in this situation where an autoloader is connected to a NetApp filer and you are trying to figure out the information like Extended Sense data, etc sent by the filer upon opening the device, targetting it according to the NDMP version 4 documentation. I am going through such a problem where i have sent SCSI CDB's to the filer like SCSI_INQUIRY, SCSI_READ_ELEMENT_STATUS, SCSI_MOVE_MEDIUM, and all you get is something which makes no sense. I am aware quiet roughly about the informaiton i should be getting with each of these requests, but i dont get that. I dont know how to figure out if i can use the only information that is sent back by the filer to find whats wrong and what can be changed. Any suggestions are appreciated, Cheers, Sonia. --------------------------------- Do you Yahoo!? Win a $20,000 Career Makeover at Yahoo! HotJobs

2 1

RE: QTree Size limits
by Derek Lai 12 May '04

12 May '04

Yes, DFS definitely will let you do this. It's for free too. It is pretty much like NFS for windows. There are quite a few other benefits. But you would need to transition everyone onto that. DFS as Microsoft distribute it is usable but pretty hard to maintain. You might want to look at the VFM product that NeApp has. It adds quite a few number of tools (auto failover, auto migration, reporting) to DFS. Derek -----Original Message----- From: Skottie Miller [mailto:skottie@anim.dreamworks.com] Sent: Wednesday, May 12, 2004 9:51 AM To: Jack Lyons Cc: 'toasters(a)mathworks.com' Subject: Re: QTree Size limits Jack Lyons wrote: > I have a 1.31 TB volume that is 90% full. There are two solutions I > have available to me. One is to try to reduce the amount of space on > the volume (but meeting resistance by users). The other is to add > space. I am trying to get approval for another TB of disk space, but I > don't think the best solution is to add it to the existing QTree. My > backup window for this volume is 14 -15 hours currently and would only > get bigger if I add space and that is not acceptable. I know I can > another qtree / cifs share but I was hoping I could do it in such a way > that I would still have another Qtree but make it available to the user > via a single CIFS Share. seems you may want to investigate backup system changes; a 14 hour window for a 1.3 TB volume is terrible. what backup product(s) are you using? For reference, we churn 800 - 1.2 TB per night, out of 40 TB online, and the first-phase backup window (filer to stage pools) is 4 - 6 hours long. Then the data moves from staging pool to tape, outside the backup window. We use Tivoli storage manager off three Linux backup servers, doing file-at-a-time differential backups over NFS. > I was hoping I could add another volume, probably /vol/vol2 with a qtree > called /vol/vol2/active clients and some how make it appear to the user > as a subdirectory under \\server\creative <file:///\\server\creative> Do you use DFS to mount shares ? My windows guys think DFS supports nesting shares as you describe. -skottie -- Scott Miller | Animation Technology work: skottie(a)dreamworks.com | Dreamworks Feature Animation life: skottie(a)pobox.com | http://skottie-di.net

1 0

QTree Size limits
by Jack Lyons 12 May '04

12 May '04

I have a 1.31 TB volume that is 90% full. There are two solutions I have available to me. One is to try to reduce the amount of space on the volume (but meeting resistance by users). The other is to add space. I am trying to get approval for another TB of disk space, but I don't think the best solution is to add it to the existing QTree. My backup window for this volume is 14 -15 hours currently and would only get bigger if I add space and that is not acceptable. I know I can another qtree / cifs share but I was hoping I could do it in such a way that I would still have another Qtree but make it available to the user via a single CIFS Share. Currently /vol/vol1/creative is the qtree and I have a cifs share (called creative) pointing to /vol/vol1/creative, so the users connect to \\server\creative <file:///\\server\creative> (or for the Macs) smb://server/creative I was hoping I could add another volume, probably /vol/vol2 with a qtree called /vol/vol2/active clients and some how make it appear to the user as a subdirectory under \\server\creative <file:///\\server\creative> This is probably confusing, so please ask any questions. Jack Lyons Senior Network Engineer The Martin Agency (804) 698-8596 (v) jack.lyons(a)martinagency.com <mailto:jack.lyons@martinagency.com> (e) ----------- Health nuts are going to feel stupid someday, lying in hospitals dying of nothing --- Redd Foxx This email and its contents may be confidential. If it is and you are not the intended recipient, please do not disclose or use the information within this email or its attachments. If you have received this email in error, please delete it immediately. Thank you.

2 1

RE: Size calculations
by Hackworth, Brian 12 May '04

12 May '04

: Can you tell me whether or not a TB = 1000 GB or 1024 GB It looks like you're referring to DataFabric Manager, which uniformly uses 1024 as the multiplier for K, M, G, T, P, and E calculations. : In my volume properties screen: : : Used Capacity: 1.18 TB : % Used: 90% : Total Capacity: 1.31 TB : : But in my Manage Volumes screen it shows I have 127 GB available. : 1.31 - 1.18 = .13 TB = 133.12 GB if 1 TB = 1024 GB : 1.31 - 1.18 = .13 TB = 130 GB if 1 TB = 1000 GB : : 127 GB = .127 TB if TB = 1000 GB : 127 GB = .130 TB if TB = 1024 GB 127 GB / 1024 GB/TB = 0.124 TB. 1.18 TB + 0.12 TB = 1.30 TB, which is just about 1.31 TB. All of the values involve roundoff, so the sums will rarely match exactly. - Brian

1 0

RE: TCP/IP Compression
by Peter Furneau 12 May '04

12 May '04

Have a look at the products from Peribit Networks, NetApp use them internally for SnapMirror! -----Original Message----- From: Alan Biren To: Holland, William L; toasters(a)mathworks.com Sent: 5/12/04 3:26 PM Subject: RE: TCP/IP Compression I've used both CNT and RadWare products with great success. -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Holland, William L Sent: Wednesday, May 12, 2004 6:32 AM To: 'toasters(a)mathworks.com' Subject: TCP/IP Compression We have need to use SnapMirror over a WAN, currently T-1. Any suggestions on TCP/IP compression products to help minimize the amount of WAN bandwidth needed? Thanks in advance. Bill Holland RM/GFS/GS/ISM US Department of State IT Specialist Voice: (843) 308-5311 IVG: 35311 Fax: (843) 746-0543 IVG: 60543 Network Appliance Storage Associate Microsoft Certified Professional Microsoft Certified Systems Administrator - Windows 2000 ************************************************************************ ***************************** If you have received this email in error please notify the the system manager or the sender immediately and do not disclosed the to anyone or make copies. ** eSafe scanned this email for viruses, vandals or malicious content ** ** To find out eSafe(TM) and other Aladdin Security Products, contact AMC Corporation at (212) 620-0700 ************************************************************************ *****************************

1 0

Size calculations
by Jack Lyons 12 May '04

12 May '04

Can you tell me whether or not a TB = 1000 GB or 1024 GB In my volume properties screen: Used Capacity: 1.18 TB % Used: 90% Total Capacity: 1.31 TB But in my Manage Volumes screen it shows I have 127 GB available. 1.31 - 1.18 = .13 TB = 133.12 GB if 1 TB = 1024 GB 1.31 - 1.18 = .13 TB = 130 GB if 1 TB = 1000 GB 127 GB = .127 TB if TB = 1000 GB 127 GB = .130 TB if TB = 1024 GB so it seems that in one screen they use 1 conversion factor and another screen they use a different one. This email and its contents may be confidential. If it is and you are not the intended recipient, please do not disclose or use the information within this email or its attachments. If you have received this email in error, please delete it immediately. Thank you.

2 1

RE: QTree Size limits
by Neto, Antonio Jose Rodrigues 12 May '04

12 May '04

Use can use widelinks (please see in the manual) Hope this helps -----Original Message----- From: Jack Lyons [mailto:jack.lyons@martinagency.com] Sent: Wednesday, May 12, 2004 11:36 AM To: 'toasters(a)mathworks.com' Subject: QTree Size limits I have a 1.31 TB volume that is 90% full. There are two solutions I have available to me. One is to try to reduce the amount of space on the volume (but meeting resistance by users). The other is to add space. I am trying to get approval for another TB of disk space, but I don't think the best solution is to add it to the existing QTree. My backup window for this volume is 14 -15 hours currently and would only get bigger if I add space and that is not acceptable. I know I can another qtree / cifs share but I was hoping I could do it in such a way that I would still have another Qtree but make it available to the user via a single CIFS Share. Currently /vol/vol1/creative is the qtree and I have a cifs share (called creative) pointing to /vol/vol1/creative, so the users connect to \\server\creative <file:///\\server\creative> (or for the Macs) smb://server/creative I was hoping I could add another volume, probably /vol/vol2 with a qtree called /vol/vol2/active clients and some how make it appear to the user as a subdirectory under \\server\creative <file:///\\server\creative> This is probably confusing, so please ask any questions. Jack Lyons Senior Network Engineer The Martin Agency (804) 698-8596 (v) jack.lyons(a)martinagency.com (e) ----------- Health nuts are going to feel stupid someday, lying in hospitals dying of nothing --- Redd Foxx This email and its contents may be confidential. If it is and you are not the intended recipient, please do not disclose or use the information within this email or its attachments. If you have received this email in error, please delete it immediately. Thank you.

1 0

RE: TCP/IP Compression
by Kortas, Matt 12 May '04

12 May '04

There's an excellent solution called "HyperIP" from http://www.netex.com -Mk -----Original Message----- From: Alan Biren [mailto:ABIREN@amccorp.com] Sent: Wednesday, May 12, 2004 8:27 AM To: Holland, William L; toasters(a)mathworks.com Subject: RE: TCP/IP Compression I've used both CNT and RadWare products with great success. -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Holland, William L Sent: Wednesday, May 12, 2004 6:32 AM To: 'toasters(a)mathworks.com' Subject: TCP/IP Compression We have need to use SnapMirror over a WAN, currently T-1. Any suggestions on TCP/IP compression products to help minimize the amount of WAN bandwidth needed? Thanks in advance. Bill Holland RM/GFS/GS/ISM US Department of State IT Specialist Voice: (843) 308-5311 IVG: 35311 Fax: (843) 746-0543 IVG: 60543 Network Appliance Storage Associate Microsoft Certified Professional Microsoft Certified Systems Administrator - Windows 2000 ************************************************************************ ***************************** If you have received this email in error please notify the the system manager or the sender immediately and do not disclosed the to anyone or make copies. ** eSafe scanned this email for viruses, vandals or malicious content ** ** To find out eSafe(TM) and other Aladdin Security Products, contact AMC Corporation at (212) 620-0700 ************************************************************************ *****************************

1 0

RE: TCP/IP Compression
by Alan Biren 12 May '04

12 May '04

I've used both CNT and RadWare products with great success. -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Holland, William L Sent: Wednesday, May 12, 2004 6:32 AM To: 'toasters(a)mathworks.com' Subject: TCP/IP Compression We have need to use SnapMirror over a WAN, currently T-1. Any suggestions on TCP/IP compression products to help minimize the amount of WAN bandwidth needed? Thanks in advance. Bill Holland RM/GFS/GS/ISM US Department of State IT Specialist Voice: (843) 308-5311 IVG: 35311 Fax: (843) 746-0543 IVG: 60543 Network Appliance Storage Associate Microsoft Certified Professional Microsoft Certified Systems Administrator - Windows 2000 ***************************************************************************************************** If you have received this email in error please notify the the system manager or the sender immediately and do not disclosed the to anyone or make copies. ** eSafe scanned this email for viruses, vandals or malicious content ** ** To find out eSafe(TM) and other Aladdin Security Products, contact AMC Corporation at (212) 620-0700 *****************************************************************************************************

1 0

Monthly Newsletter From Malik Taalib, Prudential Patterson
by Malik Taalib 08 May '04

08 May '04

Agent Photo Below is a link to our monthly newsletter. Please take a few minutes to have a look. I am sure you will find many helpful tips. Thank you for subscribing to this free service and have a terrific day! http://www.myagentupdate.com/n.asp?RId=30112 If you have any questions, email us at: maliktaalib(a)excite.com Malik Taalib Prudential Patterson 7451 N. Lindbergh St. Louis, MO 63042 Phone: (314) 503-6552 Fax: (314) 838-2793 Mobile: (314) 249-7831 Feel free to visit our web site again at: http://www.maliksellsrealestate.com To automatically unsubscribe, simply click on the link below: http://www.myagentupdate.com/a.asp?subscriber=15719636 `

1 0

Implementing VIFs
by Ben Rockwood 07 May '04

07 May '04

Hello Toasters. I want to migrate all my Filers to using VIFs for switch redundancy. But in my testing so far, I can't see any way to get around taking an outage, assuming you want to retain the same IP, since you aren't allowed to create a VIF with the same IP of a live interface. Does anyone know a way around this? It still seems best to take an outage to reboot the filers and verify that everything is going to work properly in case of a panic, but I'd still like to avoid it. Thanx. benr.

2 1

Mail queues and rocket drives
by Maren S. Leizaola 07 May '04

07 May '04

Hi, I've been thinking about moving our outbound mail relay queue and deploying a NetApp. However I came across solid state disks. I found that in terms of SCSI based solid state drives Curtis makes the best and most affordable stuff in the 1G-8GB size. It has SCA interfaces and dimmesions of a SCSI disk that will fit into a hot swap bay. These start at around US$2000 and seem to max out at 10,000 transactions per second. Given that our mail queue back log does not grow above 100MB I am thinking of getting Cenetek's Rocket Drive with 1GB, this is a PCI board that has its own external power and hooks to your UPS. A magazine benchmarked them to 30,000 transactions per second at US$1000 it seems like a bargain to me. Centaket rate them at 100K transactions per second. In its price range feature performance it seems to have a very clearly defined niche. It also beats ram drives as it does not require the machines CPU to do the IO. Anyway I just want to know if any of you guys are using these to boost your servers and have any opinions or advice. Regards, Maren. -------------------------------------------------------------- HKdotCOM Ltd AIM: MarenHKdotCOM Tel: 852 2865-4865 ext 888 leizaola(a)hk.com ICQ: 39905706 Fax: 852 2865-4100 -------------------------------------------------------------- Join our liquidations list : http://www.lists.hk.com/lists/listinfo/liquidations

2 3

PARTNERSHIP PROPOSITION
by steven taylor 07 May '04

07 May '04

PARTNERSHIP PROPOSITION Att: sir/ma. My name is Mr. Steven Taylor, cousin to former liberian President Charles Taylor. could you likely be interested to help me and my family transfer & invest a certain amount of US Dollars into your account in your country under partnership bases and percentage wise conditions? The total amount is US$45.000,000.00 (FOURTY-FIVE MILLION U NITED STATES DOLLAR). For obvious reasons (my status here as a refugee) I can not be able to carry out this transaction alone. I am in South Africa now where the money is kept in the custody of a private security company. If you are interested & capable, then contact me on my telephone number : +27 834799667 . I will discuss details and terms with you once you reply positively to this partnership proposition. I expect to hear from you urgently. Truthfully Yours Steven Taylor _________________________________________________________________ Block pop-up ads in a jiffy - get MSN Toolbar! http://toolbar.msn.co.za?DI=1054&XAPID=2083

1 0

Confidential Enquiry.
by keeskoen 06 May '04

06 May '04

RE: ENQUIRY. My name is Jan Maakuy. I am a senior partner in the firm Kees and Koen Consultants: Private Investigators and Security Consultants. We are conducting a standard investigation procedure on behalf of HSBC, the international Banking conglomerate. This investigation involves a client who shares the same surname with you and also the circumstances surrounding investments made by this client at HSBC Republic, the Private Banking arm of HSBC. The HSBC Private Banking client died intestate and nominated no successor in title over the investments made with the Bank. The essence of this communication with you is to request that you provide us with information/comments on any or all of the four issues below: 1. Are you aware of any relative/relation who shares your same surname whose last known contact address was Brussels Belgium? 2. Are you aware of any investment of considerable value made by such a person at the Private Banking Division of HSBC Bank PLC? 3. Were you born on the 1st of June 1927? 4. Can you establish beyond reasonable doubt your eligibility to assume status of successor in title to the deceased? It is pertinent that you inform us ASAP whether or not you are familiar with this personality, that we may put an end to this communication with you and our inquiries surrounding this personality. You must appreciate that we are constrained from providing you with more detailed information at this point. Please respond to this mail as soon as possible to afford us the opportunity to close this investigation. Thank you for accommodating our enquiry. Jan Maakuy, For: K & K Consultants.

1 0

cifs audit log
by Bui, Marcus 06 May '04

06 May '04

Hi Toasters, I have three ntfs volumes on a F880. Looking through the cifs audit log, there are entries (file acess/delete, etc..) for two of the volumes but not the third. The audit should audit for the Filer on all volumes. But seems like one volume has no entries at all in the cifs log. Environment: F880, DOT 6.4.2.P12, cifs only, cifs.audit.autosave.file.extension cifs.audit.autosave.file.limit 0 cifs.audit.autosave.onsize.enable off cifs.audit.autosave.onsize.threshold 75% cifs.audit.autosave.ontime.enable off cifs.audit.autosave.ontime.interval cifs.audit.enable on cifs.audit.file_access_events.enable on cifs.audit.logon_events.enable on cifs.audit.logsize 204800000 cifs.audit.saveas /etc/log/adtlog.evt Any ideas?? Thanks, Marcus Bui AIM Investments IT Services phone: 713-986-9061 fax: 713-821-9524 email: marcus.bui(a)aiminvestments.com pager: 8773450839(a)archwireless.net ----------------------------------------- Confidentiality Note: The information contained in this message, and any attachments, may contain confidential and/or privileged material. It is intended solely for the person or entity to which it is addressed. Any review, retransmission, dissemination, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.

1 0

charity organizations
by Kolifa Salingo 06 May '04

06 May '04

Dear Friend, As you read this, I don't want you to feel sorry for me, because, I believe everyone will die someday. My name is Kolifa Salingo a merchant in Dubai,in the U.A.E.I worked with Zambian Ministry of Mining and Resources for eight years as a contractor, I have been diagnosed with Esophageal cancer . It has defiled all forms of medical treatment, and right now I have only about a few months to live, according to medical experts. I have not particularly lived my life so well, as I never really cared for anyone(not even myself)but my business. Though I am very rich, I was never generous, I was always hostile to people and only focused on my business as that was the only thing I cared for. But now I regret all this as I now know that there is more to life than just wanting to have or make all the money in the world. I believe when God gives me a second chance to come to this world I would live my life a different way from how I have lived it. Now that God has called me, I have willed and given most of my property and assets to my immediate and extended family members as well as a few close friends. I want God to be merciful to me and accept my soul so, I have decided to give alms to charity organizations, as I want this to be one of the last good deeds I do on earth. So far, I have distributed money to some charity organizations in the U.A.E, Algeria and Malaysia. Now that my health has deteriorated so badly, I cannot do this myself anymore. I once asked members of my family to close one of my accounts and distribute the money which I have there to charity organization in Bulgaria and Pakistan, they refused and kept the money to themselves. Hence, I do not trust them anymore, as they seem not to be contended with what I have left for them. The last of my money which no one knows of is the huge cash deposit of eighteen million dollars $18,000,000,00 that I have with a finance/Security Company abroad. I will want you to help me collect this deposit and dispatched it to charity organizations. I have set aside 20% for you and for your time. God be with you. Kolifa Salingo

1 0

16 group limit?
by Stewart, John 05 May '04

05 May '04

We're running an F740 currently running ONTAP 6.1.3R2 (though this has been a problem for as long as we've had a filer). We run our main filesystem with UNIX-style file permissions, and have both NFS and CIFS running. The problem we have is that if a user is in more than 16 groups, the filer will ignore the 17th and higher groups, as if that user is not a member. This is only a problem on the CIFS/Windows side. As far as I know, this is not an inherent Windows limitation, but a NetApp problem. Does anyone else run into this... how do you work around the issue (we've got a lot of engineers in many project groups, so we've got to juggle them around in the groups file to minimize the problem)? thanks johnS

3 2

NetApp SA Job in the DC/VA/MD area
by Douglas Ritschel 05 May '04

05 May '04

Does anyone know of a good NetApp Admin, living in the DC/VA/MD area, looking for a job? __________________________________ Do you Yahoo!? Win a $20,000 Career Makeover at Yahoo! HotJobs http://hotjobs.sweepstakes.yahoo.com/careermakeover

1 0

RE: Filer Technical Documentation
by Alan Biren 05 May '04

05 May '04

Nathan, I always make sure to include the configuration as sold, and then include the following commands: sysconfig -v, ifconfig -a, vif status, vol status -v, sysconfig -r, df -h, license, options, sysconfig -d. The following files are then also included: Hosts, exports. Then depending on what is installed, I would include the lun information, host initiators, snapmirror configurations, snapvault configurations, if there are any switches involved, document those configurations. I try to include the information that would be needed to rebuild the system from scratch in the event that it was to disappear. Good Luck, Alan Biren -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Nathan Alberti Sent: Tuesday, May 04, 2004 11:52 PM To: toasters(a)mathworks.com Subject: Filer Technical Documentation I need to complete technical documentation for a filer I'm currently installing and I'm a little perplexed on how to approach it. Because of the "Appliance" style of the device, its not as easy to create a detailed document as your typical Wintel/*nix server. If anyone has a template they use/have used to document a filer install/configuration I would be most thankful. -- Regards, Nathan Alberti Network Engineer GLOBAL DIAL PTY LTD PO BOX 829 Claremont, Western Australia 6910 Suite 1/278 Stirling Highway, Claremont WA 6010 Telephone: +61 8 9383 1800 Facsimile: +61 8 9383 2818 Email: nathan.alberti(a)globaldial.com Website: www.globaldial.com ___________________________________________________________________ The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you have received this email in error, please immediately notify us via email at info(a)globaldial.com ***************************************************************************************************** If you have received this email in error please notify the the system manager or the sender immediately and do not disclosed the to anyone or make copies. ** eSafe scanned this email for viruses, vandals or malicious content ** ** To find out eSafe(TM) and other Aladdin Security Products, contact AMC Corporation at (212) 620-0700 *****************************************************************************************************

1 0

Filer Technical Documentation
by Nathan Alberti 05 May '04

05 May '04

I need to complete technical documentation for a filer I'm currently installing and I'm a little perplexed on how to approach it. Because of the "Appliance" style of the device, its not as easy to create a detailed document as your typical Wintel/*nix server. If anyone has a template they use/have used to document a filer install/configuration I would be most thankful. -- Regards, Nathan Alberti Network Engineer GLOBAL DIAL PTY LTD PO BOX 829 Claremont, Western Australia 6910 Suite 1/278 Stirling Highway, Claremont WA 6010 Telephone: +61 8 9383 1800 Facsimile: +61 8 9383 2818 Email: nathan.alberti(a)globaldial.com Website: www.globaldial.com ___________________________________________________________________ The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you have received this email in error, please immediately notify us via email at info(a)globaldial.com

2 1

KINDLY HELP ME AND MY FAMILY OUT (SPEEDILY)
by jewell taylor 05 May '04

05 May '04

Good Day, Compliments of the day to you and your family. First accept my apologies for intruding into your privacy as this is not my intention. I am Mrs Jewel Taylor wife to ex-president of Liberia Charles Taylor. I want to discuss something of great importance to you and myself as well. I beleive you should have heard of my husband and his present political crisis on the Media especially on CNN and BBC, It is for this cause that i write you this message. I have a proposition to make to you as i have decided within myself to seek the aid of a foreigner to actualise this proposition it might be small to you as i do not know you in person but it will do a lot of good to i and my children. For fear of privacy i cannot disclose this on my first mail to you but will like you to respond to me. I assure you please do not be afraid as rather i should be the one to be afraid for the step i am about to take,i will establish a telephone communication means with you after your response to this mail and explain in details to you the proposition. I await your mail response so that i can give you detailed and confidential information as regards the proposition. Please take this serious. Yours Truly, MRS JEWEL TAYLOR

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters