toasters

toasters@lists.teaparty.net

13531 discussions

cDOT 9.1 , Netapp Volume encryption (NVE) and an external key management server.
by jordan slingerland 15 Feb '17

15 Feb '17

I am just beginning to research a possible deployment of a new 9.1 system hoping to utilize NVE with an external key management server. It turns out the Onboard Key Manager does not appear to be FIPS compliant. I am not very far down this rabbit hole yet, but the documents I am reading so far only mention the Onboard Key Manager for use with NVE in 9.1 Could anyone (a) confirm the NVE feature is able to work with an external key management server and (b) recommend any that i might research. Thanks, Jordan

1 0

CDOT change SNMP traphost port?
by BERNTSEN Basil 14 Feb '17

14 Feb '17

Hi folks, Does anyone know whether it's possible to set CDOT 8.2.3 up to send SNMP traps to a traphost using a specific port number? I tried system snmp traphost add xxx.xxx.xxx.xxx:xxxx and it didn't work. I googled around a bit on this subject and couldn't find any results either. Thanks! Basil ************************************************************************* This message and any attachments (the "message") are confidential, intended solely for the addressee(s), and may contain legally privileged information. Any unauthorized use or dissemination is prohibited. E-mails are susceptible to alteration. Neither SOCIETE GENERALE nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified. Please visit http://sgasdisclosure.com for important information regarding SG Americas Securities, LLC (“SGAS”). Please visit http://swapdisclosure.sgcib.com for important information regarding swap transactions with SOCIETE GENERALE. *************************************************************************

1 0

Broken file on CIFS Share
by Alexander Griesser 13 Feb '17

13 Feb '17

Hey there, I've never seen something like this before, so maybe someone can help me with that. I do have a file on a CIFS share which can be deleted on a windows client accessing this file, but it immediately reappears after you hit F5 in the explorer window. On the filer itself (7-mode installation), I can also see this file: netapp02*> ls "/vol/CIFS_SHARES/some/folder/structure" . .. file01.jpg I've mounted this share on a linux system and there it looks like this: # ls -l ls: Access to file01.jpg not possible: File or directory does not exist total 0 -????????? ? ? ? ? ? file01.jpg I'm not sure where this is coming from and how to fix that - any ideas? Running OnTap version is: NetApp Release 8.2.3P4 7-Mode: Fri May 29 14:06:54 PDT 2015 Best, Alexander Griesser Head of Systems Operations ANEXIA Internetdienstleistungs GmbH E-Mail: AGriesser(a)anexia-it.com<mailto:AGriesser@anexia-it.com> Web: http://www.anexia-it.com<http://www.anexia-it.com/> Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

2 2

CIFS Migration - 7.3.7 to 8.3.2
by Stephen Stocke 08 Feb '17

08 Feb '17

Hello Fellow Admins Sorry for the long email. I'm planning a migration of CIFS data from a FAS2020 (7.3.7) to a FAS2552 (CDOT 8.3.2). I'd like to share my rough migration plan and see if anyone has advice/cautions/optimisations to share. In my case, I don't need to just migrate the share data, I also need to split the data on the single CIFS source volume to several volumes on two SVMs on the destination cluster. Luckily, I also have a 7-mode system running 8.2.4 (FAS2240-2) at my disposal. My rough plan is as follows: 1. Qtree-SM the various departmental subfolders from FAS2020:/vol/cifsvol/folder[1,2,3,..] to FAS2240:vFiler[1,2]:/vol/cifsvol[1,2,3,...]. These subfolders aren't Qt's but my understanding is that this is possible. 2. During a maintenance window, update the QSMs, break, create shares, re-point DFS folder targets, etc. 3. Upgrade vFiler volumes to 64-bit (I believe this happens automatically). 4. Use 7MTT or manual transition-SM relationships to sync the data from the FAS2240 to the cluster SVMs. 5. During a second maintenance window, update the SMs, break, re-point DFS folder targets, etc. 6. Cleanup the FAS2020 and send it to live on a farm somewhere. Of course, we could just setup the new SVMs & vols and use a tool like Robocopy to migrate the data but we feel more comfortable using storage level functions if possible. Does anyone have any thoughts on the above? I'm about to start running through this process with test data and I'm hoping your advice/experiences might help me on my way. Thanks in advance. Steve

1 0

Issue with CIFS shares and .temp files
by Mark Saunders 03 Feb '17

03 Feb '17

Hi I am the administrator of a c mode filer for one of my companies customers and the customers are having some issues with CIFS shares. This issue is that they are getting .temp files left in all folders of the share regardless of the application used which they think are creating a mess and are manually removing. Is there anything that can be checked or changed on the storage end to change this behavior or is it more likely to be an issue somewhere else ? Regards Mark Data Centre Sysadmin Team Managed Services The Sysadmin Team promoting PCMS Values ~Integrity~Respect~Commitment~ ~Continuous Improvement~ The information contained in this e-mail is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. If you are not the intended recipient of this e-mail, the use of this information or any disclosure, copying or distribution is prohibited and may be unlawful. If you received this in error, please contact the sender and delete the material from any computer. The views expressed in this e-mail may not necessarily be the views of the PCMS Group plc and should not be taken as authority to carry out any instruction contained. The PCMS Group reserves the right to monitor and examine the content of all e-mails. The PCMS Group plc is a company registered in England and Wales with company number 1459419 whose registered office is at PCMS House, Torwood Close, Westwood Business Park, Coventry CV4 8HX, United Kingdom. VAT No: GB 705338743

1 0

super secret flags
by Peter D. Gray 03 Feb '17

03 Feb '17

Hi people Just out of idle curiosity, am I the only netapp admin who does not know about the super secret flags to allow snapmirror to actually work at reasonable speed? We were running 8.3.2 cluster mode, and spent weeks looking into why our snapmirrors to our remote site ran so slowly. We were often 2 days behind over 40G networks. Obviously, we focussed on network issues. And we wasted a lot of time. We could make no sense of the problem at all since sometimes it appears to work ok, the later the transfers slowed to a crawl. We eventually opened a case and it did not take to long for a reply which basically said "why don't you just disable the global snapmirror throttle." I had already looked into such a beast, but found nothing. As you may or may not know, it turns out to be a per node setting. The name of the flag is repl_throttle_enable. Of course, you can only see such flags or change them on the node, in privileged mode. Setting the flag to 0 immediately (and I do mean immediately) allowed our snapmirrors to run at the speed you might expect over 40G. Instead of taking 2 days, snapmirror updates now took 2 hours. We have since upgraded to 9.1. The flags reverted to on, but again can be set to off. I think there is a documented global snapmirror throttle option in 9.1, but I have not looked into that yet. Are we the only site in the world to have seen this issue? We use snapmirror DR for all our mirrors which may be a factor. As I said, just idle curiousity and maybe helping someone avoid the time wasting we had. Regards, pdg Peter Gray Ph (direct): +61 2 4221 3770 Information Management & Technology Services Ph (switch): +61 2 4221 3555 University of Wollongong Fax: +61 2 4229 1958 Wollongong NSW 2522 Email: pdg(a)uow.edu.au Australia URL: http://pdg.uow.edu.au

7 21

Dell SCv2020 supported disks type
by Camillo Gornati 03 Feb '17

03 Feb '17

Hi all, quick question regarding the DELL SCv2020. Does it support SATA disks ? or only SAS and NL SAS? Thanks in advance, C.

1 0

IBM nSeries autosupport not working over HTTPS
by Rhodes, Richard L. 01 Feb '17

01 Feb '17

We just had a disk failure on a nSeries box. No big deal. Usually when a problem come up, autosuport gets sent, and IBM nSeries support shoots us an email back within minutes to work on the problem. This time I had nothing from them for hours. So I ran a manual autosupport and opened a case. IBM responded almost immediately. He said they had my manually sent autosupport but said it was corrupt and unusable. Hmmmmmmm We use HTTPS for autosupport since SMTP failed due to attachments being too big for our email setup. He asked me to change to SMTP and run autosupport again, which I did, and he got it and it was good. Interesting, the attachments must have made it through. Now, the fun . . . He said they hadn't received a autosupport since 12/19/2016. It's a known problem within IBM and they haven't been able to fix. My impression is that anyone using HTTPS autosupport is affected. He thinks changing to HTTP will fix it if we don't want SMTP. I have to open another case to get more info. So, autosupports haven't been working for over a month, the problem is within IBM, and nothing was said!!!! Can I say that we are just a little upset? Rick ----------------------------------------- The information contained in this message is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately, and delete the original message.

4 3

Ontap Select-a couple of questions
by Milazzo Giacomo 01 Feb '17

01 Feb '17

Hello everybody, I'm planning to setup a 9.1 Ontap Select single node for demo and tests. I've read that prerequisites are almost strict. They ask for at least 8 HDDs and 2 TB + 266 GB hd space on the internal VMFS datastore where to put the Select vmdk. For demo I don't have such a server, there's enough RAM and cores but just few hdds Raid 5 protected. Do you think I could set up Select with no issues or there's some soft/hard lock that avoid to do it if less than 8 hdds are found? The secondo question is this. Times ago I was reading somewhere that Select could be supported on a VSAN datastore too. Do you have some news about this? Regards,

1 0

System attention LED
by Alexander Griesser 01 Feb '17

01 Feb '17

Hi there, I have two filers (1x FAS2240 and 1x FAS2650) and both have the system attention LED lit and I have no idea why. `System health status show` as well as config advisor are both A-OK and there are no visible indicators why this LED is still lit. Any idea how to find out the root cause of this LED on the front bezel or how I can check or maybe reset the status of the LED through CLI? Thanks, Alexander Griesser Head of Systems Operations ANEXIA Internetdienstleistungs GmbH E-Mail: AGriesser(a)anexia-it.com<mailto:AGriesser@anexia-it.com> Web: http://www.anexia-it.com<http://www.anexia-it.com/> Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

6 22

X1144A - No link
by Alexander Griesser 30 Jan '17

30 Jan '17

Hi, I've just installed those fancy X1144A cards in one of our AFF300 systems and it seems they're getting recognized properly, but I'm not able to get a link on them. sysconfig says: slot 2: 40 Gigabit Ethernet Controller XL710 QSFP+ e2a MAC Address: 3c:fd:fe:a2:90:c8 (auto-unknown-down) e2e MAC Address: 3c:fd:fe:a2:90:c9 (auto-unknown-down) SAN01::> net port show -port e2* (network port show) Node: SAN01-01 Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- e2a Default - down 1500 auto/10 - e2e Default - down 1500 auto/10 - Node: SAN01-02 Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- e2a Default - down 1500 auto/10 - e2e Default - down 1500 auto/10 - 4 entries were displayed. For testing purposes, I did connect e2a on node1 to e2a on node 2 and I already tried exchanging the QSFPs and cables, but still no dice. Any idea what could be wrong here? According to HWU, the minimum required OS version is 9.1RC2, which is exactly what is installed currently: SAN01::> version NetApp Release 9.1RC2: Thu Nov 24 08:59:46 UTC 2016 Best, Alexander Griesser Head of Systems Operations ANEXIA Internetdienstleistungs GmbH E-Mail: AGriesser(a)anexia-it.com<mailto:AGriesser@anexia-it.com> Web: http://www.anexia-it.com<http://www.anexia-it.com/> Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

3 7

AW: X1144A - No link
by Alexander Griesser 27 Jan '17

27 Jan '17

Yes, already tried that. Here’s the –instance output of those ports: SAN01::*> net port show -port e2* -instance (network port show) Node: SAN01-01 Port: e2a Link: down MTU: 1500 Auto-Negotiation Administrative: true Auto-Negotiation Operational: true Duplex Mode Administrative: auto Duplex Mode Operational: half Speed Administrative: auto Speed Operational: 10 Flow Control Administrative: full Flow Control Operational: none MAC Address: 3c:fd:fe:a2:90:c8 Up Administrative: true Autorevert Delay: - Port Type: physical Interface Group Parent Node: - Interface Group Parent Port: - Distribution Function: - Create Policy: - Parent VLAN Node: - Parent VLAN Port: - VLAN Tag: - Remote Device ID: - IPspace Name: Default DCB State: incapable Broadcast Domain: - MTU Administrative: 1500 Port Health Status: - Ignore Port Health Status: false Port Health Degraded Reasons: - […] Node: SAN01-02 Port: e2a Link: down MTU: 1500 Auto-Negotiation Administrative: true Auto-Negotiation Operational: true Duplex Mode Administrative: auto Duplex Mode Operational: half Speed Administrative: auto Speed Operational: 10 Flow Control Administrative: full Flow Control Operational: none MAC Address: 3c:fd:fe:a2:8f:a0 Up Administrative: true Autorevert Delay: - Port Type: physical Interface Group Parent Node: - Interface Group Parent Port: - Distribution Function: - Create Policy: - Parent VLAN Node: - Parent VLAN Port: - VLAN Tag: - Remote Device ID: - IPspace Name: Default DCB State: incapable Broadcast Domain: - MTU Administrative: 1500 Port Health Status: - Ignore Port Health Status: false Port Health Degraded Reasons: - Best, Alexander Griesser Head of Systems Operations ANEXIA Internetdienstleistungs GmbH E-Mail: AGriesser(a)anexia-it.com<mailto:AGriesser@anexia-it.com> Web: http://www.anexia-it.com<http://www.anexia-it.com/> Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601 Von: CPO [mailto:cavinoquin@gmail.com] Gesendet: Freitag, 27. Januar 2017 14:18 An: Alexander Griesser <AGriesser(a)anexia-it.com> Betreff: Re: X1144A - No link Did you try to status-admin-up the interface? On Jan 27, 2017 4:20 AM, "Alexander Griesser" <AGriesser(a)anexia-it.com<mailto:AGriesser@anexia-it.com>> wrote: Hi, I’ve just installed those fancy X1144A cards in one of our AFF300 systems and it seems they’re getting recognized properly, but I’m not able to get a link on them. sysconfig says: slot 2: 40 Gigabit Ethernet Controller XL710 QSFP+ e2a MAC Address: 3c:fd:fe:a2:90:c8 (auto-unknown-down) e2e MAC Address: 3c:fd:fe:a2:90:c9 (auto-unknown-down) SAN01::> net port show -port e2* (network port show) Node: SAN01-01 Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- e2a Default - down 1500 auto/10 - e2e Default - down 1500 auto/10 - Node: SAN01-02 Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- e2a Default - down 1500 auto/10 - e2e Default - down 1500 auto/10 - 4 entries were displayed. For testing purposes, I did connect e2a on node1 to e2a on node 2 and I already tried exchanging the QSFPs and cables, but still no dice. Any idea what could be wrong here? According to HWU, the minimum required OS version is 9.1RC2, which is exactly what is installed currently: SAN01::> version NetApp Release 9.1RC2: Thu Nov 24 08:59:46 UTC 2016 Best, Alexander Griesser Head of Systems Operations ANEXIA Internetdienstleistungs GmbH E-Mail: AGriesser(a)anexia-it.com<mailto:AGriesser@anexia-it.com> Web: http://www.anexia-it.com<http://www.anexia-it.com/> Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601 _______________________________________________ Toasters mailing list Toasters(a)teaparty.net<mailto:Toasters@teaparty.net> http://www.teaparty.net/mailman/listinfo/toasters

1 0

Dell compellent
by Camillo Gornati 27 Jan '17

27 Jan '17

Good morning all! Does the dell compellent scv2020 has any similarities with netapp storage? Thanks. Sent from my iPhone

3 2

MIgration from Isilon with XCP
by Jeffrey Mohler 26 Jan '17

26 Jan '17

Has anyone here used XCP for Isilon migration, any experiences you can share? Thanks! _________________________________Jeff MohlerTech Yahoo, Storage Architect, Principal

2 1

Volume Encryption Hardware
by Stephen Stocke 26 Jan '17

26 Jan '17

Hello I'm trying to find an official list of which hardware supports the new 9.1 Netapp Volume Encryption (NVE) feature. I've checked HWU and can't see anything that shows NVE compatibility. I've also tried IMT but I've never been able to get along with that tool. Specifically, I'm trying to find out if the FAS2500 series or new FAS2650 platforms support this feature. I've listened to TechOnTap podcast #59 in which the speakers discuss NVE but I'm now looking for the "official" documentation on hardware support. Any pointers to the right docs would be greatly appreciated! Kind regards Steve

6 6

cDOT 9.0: inodes not growing with respective volume growth
by Momonth 26 Jan '17

26 Jan '17

Hi All, I've noticed the following on cDOT 9.0 production cluster: na201::> df -h vol_imgstore03 Filesystem total used avail capacity Mounted on Vserver /vol/vol_imgstore03/ 90TB 60TB 29TB 67% /vol_imgstore03 na201svm-nfs10g-02 /vol/vol_imgstore03/.snapshot 0B 0B 0B 0% /vol_imgstore03/.snapshot na201svm-nfs10g-02 2 entries were displayed. na201::> vol show vol_imgstore03 -fields files vserver volume files ------------------ -------------- -------- na201svm-nfs10g-02 vol_imgstore03 59999998 So, volume's size is 90TB and its current max inodes possible is ~ 60M na201::> vol size vol_imgstore03 +10g -vserver na201svm-nfs10g-02 vol size: Volume "na201svm-nfs10g-02:vol_imgstore03" size set to 90.01t. Now, I just added 10G to the volume, expecting it's going to increase the "files" value respectively: na201::> vol show vol_imgstore03 -fields files vserver volume files ------------------ -------------- -------- na201svm-nfs10g-02 vol_imgstore03 59999998 However it's not the case. Anyone knows what I'm missing here? Cheers, Vladimir

1 1

VSERIES LUN MISSED CAUSES GENERAL PANIC AFTER TAKEOVER
by Milazzo Giacomo 25 Jan '17

25 Jan '17

Hi, o a V6000 with Ontap 8.2 7Mode a series of LUNs have been configured from an EMC CX4 system. It happened that randomly a couple of LUN fail on the same raid group of the CX4. The controller loose its aggregate that goes in degraded mode and a takeover start to the other node. The other node after takeover attempt to put this aggregate online but if fails because one of its lun is still missed. This panic all the systems and this should be avoided. There are other third party arrays virtualized that should continue to work. Is it possible to exclude from takeover actions only one aggregate (I think no), why the remaining node panic? regards

1 0

Re: Bug 1057844
by s.eno 25 Jan '17

25 Jan '17

Thanks guys! This one took us by surprise this weekend. > On Jan 24, 2017, at 7:14 PM, Krzesinski, John <John.Krzesinski(a)netapp.com> wrote: > > Upgrade to 8.3.2P9 - it has the fix. If you see the problem on 8.2.x upgrade to 8.2.4P6 (which also has the fix). > > -----Original Message----- > From: toasters-bounces(a)teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Scott Eno > Sent: Tuesday, January 24, 2017 4:08 PM > To: Toasters <toasters(a)teaparty.net> > Subject: Re: Bug 1057844 > > Sorry, we’re running 8.3.2P5 on all our storage systems. > > >> On Jan 24, 2017, at 7:01 PM, Scott Eno <s.eno(a)me.com> wrote: >> >> Hi, >> >> Anyone running into this “Previous Versions” bug? I can’t see any snapshots taken since 1/1/2017 on a variety of CIFS shares. >> >> — >> Scott Eno >> s.eno(a)cooley.com >> _______________________________________________ >> Toasters mailing list >> Toasters(a)teaparty.net >> http://www.teaparty.net/mailman/listinfo/toasters > > > _______________________________________________ > Toasters mailing list > Toasters(a)teaparty.net > http://www.teaparty.net/mailman/listinfo/toasters

1 0

Bug 1057844
by Scott Eno 25 Jan '17

25 Jan '17

Hi, Anyone running into this “Previous Versions” bug? I can’t see any snapshots taken since 1/1/2017 on a variety of CIFS shares. — Scott Eno s.eno(a)cooley.com

2 2

Job for Netapp admin
by Yuvaraja Shivaram 22 Jan '17

22 Jan '17

Hi team, Please let us know if you come across Netapp openings in any of the company Yuvaraja.kishan(a)gmail.com Regards Yuvaraja

6 6

Issue moving large snapmirror destination
by BERNTSEN Basil 19 Jan '17

19 Jan '17

Hi folks, I'm managing a 7-mode system (8.1) with a snapmirror destination of 35TB. I need to move it to a new aggregate on the same head. I really want avoid rebaselining from prod... I've tried a snapmirror cascaded off the normal destination, however it will likely take 4 days to complete using the internal loopback. While this is running, snapmirror scheduled updates to the normal destination volume don't run. I also tried a vol copy, but that seems to require you to keep a CLI session online for the whole transfer. Once it is copied with snapshots to the new aggregate, I'm going to change the source in the snapmirror.conf file. Does anyone have any ideas about how I could move this? Thanks! Basil ************************************************************************* This message and any attachments (the "message") are confidential, intended solely for the addressee(s), and may contain legally privileged information. Any unauthorized use or dissemination is prohibited. E-mails are susceptible to alteration. Neither SOCIETE GENERALE nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified. Please visit http://sgasdisclosure.com for important information regarding SG Americas Securities, LLC (“SGAS”). Please visit http://swapdisclosure.sgcib.com for important information regarding swap transactions with SOCIETE GENERALE. *************************************************************************

4 4

Snapvault including old Snapshots?
by Alexander Griesser 12 Jan '17

12 Jan '17

Hi, I'm not sure if this is possible with SnapVault, but I would need to snapvault an existing volume which does currently have old sv_daily Snapshots on it, here's the output of "snap list": %/used %/total date name ---------- ---------- ------------ -------- 0% ( 0%) 0% ( 0%) Jan 09 10:00 hourly.0 0% ( 0%) 0% ( 0%) Jan 09 06:00 hourly.1 0% ( 0%) 0% ( 0%) Jan 09 00:00 nightly.0 0% ( 0%) 0% ( 0%) Jan 08 22:00 hourly.2 0% ( 0%) 0% ( 0%) Jan 08 18:00 hourly.3 0% ( 0%) 0% ( 0%) Jan 08 00:00 nightly.1 0% ( 0%) 0% ( 0%) Jan 07 00:00 nightly.2 99% (99%) 55% (55%) Jun 17 17:00 sv_daily.0 99% ( 0%) 55% ( 0%) Jun 16 17:00 sv_daily.1 99% ( 0%) 55% ( 0%) Jun 15 17:00 sv_daily.2 In fact, I would only be interested in sv_daily.2. Any chance to do that with SnapVault or maybe SnapMirror or would I have to clone the snapshot on the source volume into a new volume and transfer the volume created out of sv_daily.2 then? Best, Alexander Griesser Head of Systems Operations ANEXIA Internetdienstleistungs GmbH E-Mail: AGriesser(a)anexia-it.com<mailto:AGriesser@anexia-it.com> Web: http://www.anexia-it.com<http://www.anexia-it.com/> Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

2 4

prototyping opportunity - NetApp with Service-Now
by Weihs, Yossi 11 Jan '17

11 Jan '17

Hello As you may know, our own NetApp IT uses Service-Now extensively to maintain its large number of FAS / ONTAP systems ( see the following marketing message at http://www.servicenow.com/customers/netapp.html ). One of the NetApp engineering teams is now working on a prototype integration with Service-Now which will automate the creation of support action tickets (such as replacing a failed power supply) - the goal being to automate more work by syncing up NetApp ASUP cases with the customers Service-Now system. No commitment to having a production product - we are exploring market demand. Please respond directly to my email if you are interested in helping us by participating in (1) providing feedback to the concepts, 30-60 minutes webex (2) have Service-Now and want to experiment with ticket automation (scope TBD ) Happy new year, Joseph "Yossi" Weihs Sr. Manager, Product Management Data Fabric and Manageability Group NetApp

1 0

re-purposing older NetApps?
by Patrick Giagnocavo 11 Jan '17

11 Jan '17

Curious, what happens with older NetApps - is there a way to re-purpose them that makes sense? I have been told that the DS14MK2-AT shelves can be used as JBOD disk shelves with regular non-Netapp-firmwared drives - is this true? If so, would it support the >2TB drives that are out these days? (I have access to a 6 or 7 shelf 3070 with 56x1TB drives and some 500GB's ; what scares me is not the size of the rack, but the size of the likely power bill! ) Cheers Patrick

3 2

Ontap select with snaplock?
by BERNTSEN Basil 11 Jan '17

11 Jan '17

Does anyone whether Ontap Select supports snaplock? ************************************************************************* This message and any attachments (the "message") are confidential, intended solely for the addressee(s), and may contain legally privileged information. Any unauthorized use or dissemination is prohibited. E-mails are susceptible to alteration. Neither SOCIETE GENERALE nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified. Please visit http://sgasdisclosure.com for important information regarding SG Americas Securities, LLC (“SGAS”). Please visit http://swapdisclosure.sgcib.com for important information regarding swap transactions with SOCIETE GENERALE. *************************************************************************

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters