toasters

toasters@lists.teaparty.net

13517 discussions

Start a nNew thread

re: Hello
by Sanchez Leon 07 Mar '06

07 Mar '06

Hi, toasters. -- Best Regards, Sanchez Leon mailto:toasters@mathworks.com

1 0

RE: iSCSI on Windows Question
by Hill, Aaron 06 Mar '06

06 Mar '06

Running all of ours without snapdrive. If you have standard and static configurations with only small scale or "niche" implementations, it works a treat. Snapdrive can assist if you are planning a lot of LUN manipulation. i.e. snapshots of LUNS, Changing mappings between hosts, drives etc. Or if you are "dumbing" it down for simpler and scalable administration, Snapdrive is a good value proposition. Essentially it should help to keep operations costs down, one of the strongest drivers for any centralised storage implementation. If you have a very dynamic environment with many hundreds of hosts, I think there are better storage platforms than NetApp with more scalable software "suites". Aaron -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Joseph King Sent: Tuesday, 7 March 2006 9:11 AM To: toasters(a)mathworks.com Subject: iSCSI on Windows Question Is anyone running iSCSI on windows without SnapDrive or is it just a big pain w/o SnapDrive? How does SnapDrive for Windows make your life easier, is it work the license? Joe ************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. We can be contacted through our web site: commbank.com.au. If you no longer wish to receive commercial electronic messages from us, please reply to this e-mail by typing Unsubscribe in the subject line. ***************************************************************

1 0

RE: iSCSI on Windows Question
by Dean, Phil (ITO) 06 Mar '06

06 Mar '06

Yes we are. The only issue is that with out snapdrive you'll have to use another utility like diskpart to extend the partition, if you change it's size. Philip -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Joseph King Sent: Tuesday, 7 March 2006 9:11 AM To: toasters(a)mathworks.com Subject: iSCSI on Windows Question Is anyone running iSCSI on windows without SnapDrive or is it just a big pain w/o SnapDrive? How does SnapDrive for Windows make your life easier, is it work the license? Joe ************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. We can be contacted through our web site: commbank.com.au. If you no longer wish to receive commercial electronic messages from us, please reply to this e-mail by typing Unsubscribe in the subject line. ***************************************************************

1 0

RE: iSCSI on Windows Question
by Glenn Walker 06 Mar '06

06 Mar '06

Depends on what you are doing... If you need to quickly provision LUNs or connect to snapshot versions of them, it's very useful. If you need to take a snapshot (consistent snapshot) of a filesystem, it's almost impossible to live without. If you never intend to back up a LUN (snapshot) or mount many, you may not need it. Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Joseph King Sent: Monday, March 06, 2006 5:11 PM To: toasters(a)mathworks.com Subject: iSCSI on Windows Question Is anyone running iSCSI on windows without SnapDrive or is it just a big pain w/o SnapDrive? How does SnapDrive for Windows make your life easier, is it work the license? Joe

1 0

iSCSI on Windows Question
by Joseph King 06 Mar '06

06 Mar '06

Is anyone running iSCSI on windows without SnapDrive or is it just a big pain w/o SnapDrive? How does SnapDrive for Windows make your life easier, is it work the license? Joe

1 0

Netapp Snapdrive and Novell OES based on SuSe Linux kernel
by Patrick van Helden 06 Mar '06

06 Mar '06

Hi, Anybody out there who has some experience in setting up Snapdrive for Linux with Novell Open Enterprise Server base don the SuSe linux kernel? I was wondering if this is a supported solution and if it will work. Especially the snapdrive feature to connect a novell server to a snapshot of a Netapp LUN for single file restore. Best Regards, Patrick van Helden

1 0

Nigeria Agip Oil Company Limited (NAOC): Contact: Eng. Musa Namaba!!!
by infoagip_oil＠virgilio.it 05 Mar '06

05 Mar '06

Nigeria Agip Oil Company Limited (NAOC): Contact: Eng. Musa Namaba!!! 1- 7 Daiki Road, Off Air Force Headquarter, Lagos, Nigeria. Sir/Madam, ALLOCATION OF OPL 216 AND 316 BLOCKS(OIL PROSPECTIVE LICENCE) We write to inform you that, registration and allocation of OPL 216 and 316 blocks is available for Oil prospective investors. We advised that for registration and enquiry, contact the head of marketing and contract allocation department for more details. Engineer Dr. Theophilus Okoh Tel: 234-1-776-2252 Fax: +1206-888-4473 Email: theophilusokoh(a)netscape.net Note, registration and application are limited to corporate investors. Best regard, Mrs. Edward Regina Pres Secretary to Eng. Musa Namaba Nigeria Agip Oil Company (NAOC) Lagos.

1 0

INVESTIGATION TEAM
by Kenneth Thompson 04 Mar '06

04 Mar '06

Your Kind Attention, My name is Kenneth Thompson;I work with INTASURE-SECURE INSURANCE COMPANY in Madrid Spain We are conducting a standard process investigation involving a client who shares the same name with you and also the circumstances surrounding investments made by this client at THE BANCO SANTANDER CENTRAL HISPANO MADRID SPAIN. SANTANDER CENTRAL HISPANO MADRID SPAIN,client died and nominated no next of kin to inherit the title over the investments made with SCBH BANK MADRID SPAIN. The essence of this communication with you is to request that you provide us information on three issues: 1-Are you aware of any relative/relation having the same surname, whose last known contact address was Spain? 2-Are you aware of any investment of considerable value made by such a person at SCBH BANK MADRID SPAIN.? 3-Can you establish beyond reasonable doubt your eligibility to assume status of next of kin to the deceased? It is pertinent that you inform us ASAP whether or not you are familiar with this personality that we may put an end to this communication with you and our inquiries surrounding this personality. You must appreciate that we are constrained from providing you with more detailed information at this point. Please respond to this mail as soon as possible to afford us the opportunity to close this investigation. Thank you for accommodating our enquiry. Yours sincerely, Mr Kenneth Thompson. INTASURE SECURE INSURANCE For, SCBH BANCO,MADRID ESPA�A.

1 0

afraid to answer the phone
by Wyome 04 Mar '06

04 Mar '06

Yo Romein, If you're like me, you're almost on the brink of bank ruptcy and it stinks. It was great that I came across www.partnergonohow.com/9o/, they helped me abolish all my debt. It's greathow they can do it but it is proven. They helped me to make my lifestyle and stop worrying about all the debt and start enjoying my life more. vince her to slow down her lifestyle, Mattie's character and mind setting prohibits her from becoming the stereotypical elder. She must make a. that she did not care what she looked like when it was obvious that she did.In The Great Gatsby Fitzgerald has many themes worked into his story. One the You can thank me later, Wyome

1 0

re: Hello
by Delgado Devon 04 Mar '06

04 Mar '06

Hi, toasters. -- Best Regards, Delgado Devon mailto:toasters@mathworks.com

1 0

RE: Using old FC shelves without filer
by Ben Rockwood 04 Mar '06

04 Mar '06

Master Blake is indeed correct. I'm currently using FC8 and FC9 shelves for: 1) Testing iSCSI implementations on Linux 2) Testing ZFS on OpenSolaris (SPARC) 3) My home directory (UFS) on OpenSolaris (AMD) I've got piles of old selves that we used on 760's and 840's. Literally, I've got 4 stacks of shelves that are 6' high. I use filer shelves for just about everything. The only trick is that they are copper, so hold onto your HSSDC copper cables (HSSDC-to-DB9) and the DB9 interconnect cables. Also, pull the QLogic 2100C PCI FC-AL cards out of the heads and put them in just about any system you want. In the case of my ZFS testing I've got 6 shelves pluged into a Brocade 2800 Silkworm Fabric Switch thanks to some cheap HSSDC GBIC's I bought on eBay, and then I use the FabricOS 'QuickLoop' feature to loop the shelves into both a JNI and a Sun SOC+ in my Sun Ultra2. Frankly, old filer shelves are the best building blocks around for a variety of storage experiements and implementations. I love 'em. The one catch is that I have as of yet been unsuccess at un-un-OnTap-izing them. That is to say, once you've blown away the disk headers and you put it back onto a Filer, OnTap won't touch the thing. I'm sure there is some diag command to reblast the disk but I'm not sure what it is, and frankly don't care. Also, the disks are of course really old, so the failure rate is pretty sizable, so if you don't have an endless supply of spares like I do, you might want to be careful about what you do with 'em. NetApp gear kicks ass, whether its connected to a head or not. :) benr. -----Original Message----- From: owner-toasters(a)mathworks.com on behalf of Blake Golliher Sent: Fri 3/3/2006 11:17 PM To: Glenn Walker Cc: Charles Sprickman; toasters(a)mathworks.com Subject: Re: Using old FC shelves without filer Ben wrote an article on this very thing! http://www.cuddletech.com/articles/netapp/netapp-evms.html I've been able to reuse some old R150 shelves with very little work on a FreeBSD box. It works great! -Blake On 3/3/06, Glenn Walker <ggwalker(a)mindspring.com> wrote: > They sound like FC8\FC9 shelves (the NetApp designated part). If I > recall correctly, those old shelves were made for NetApp by a company > called xyratex (www.xyratex.com) but I'm not sure you're going to find > much about them. > > Happy hunting. > > As for the comm ports, those are not comm ports... they sound like the > DB9\FCAL ports that you use to transfer data (using copper cables). > > Old filer? You're talking about a 700 series or older, or maybe an 800 > series if you can find one. Issues: in order to make it work, you need > to license it - NetApp won't just give you licenses since you picked it > up on resell and they'll charge a premium for supporting it. You're > probably looking around $1500 on the low end for old stuff that doesn't > have any new software versions coming out. > > From the sound of it you may be better off building a linux machine with > some of those new 1TB harddrives for the same money. > > If money was no object, I'd suggest a FAS270... but $40k is probably out > of your budget (like mine). :) > > Glenn > > -----Original Message----- > From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] > On Behalf Of Charles Sprickman > Sent: Friday, March 03, 2006 9:07 PM > To: toasters(a)mathworks.com > Subject: Using old FC shelves without filer > > Hello all, > > I recently had three NetApp shelves dumped in my lap (ouch!). > > They were attached to a host with a (now borked) Mylex ExtremeRAID 3000. > > I'm not having much luck finding any hardware RAID cards that compare to > > the Mylex card and don't cost more than a few grand... > > Anyhow, I may just get a simple FC card and do software RAID under > FreeBSD > using the new GEOM RAID tools. But before I go too far I'm trying to > find > some documentation on these shelves. They are FC/copper shelves. There > > are labels on them that read: > > Part Code - XL401R-FJ-02D > Part Code - XL401R-FJC-02D > Part Code - XL401R-FJF-02D > Revision - A > "Made in Ireland" > > On the back each shelf has a rear panel flanked by two power supplies. > The rear panel has three "cards": FC In/Out, Comm1/2 w/ temp/mute > buttons, > shelf id select with port a/b expansion switches. > > Each shelf has 7 36GB drives. > > Some digging reveals the company that made these for NetApp was bought > by > Adaptec a few years ago. > > Where can I find some docs on the shelves themselves, specifically the > two > "COMM" ports? I tried hooking a terminal up to each, but no response > after trying a variety of speeds. > > Lastly, what kind of money would I be looking at to buy a used Filer? > This would be primarily for hosting mail and web stuff. We're talking > about up to 10,000 mailboxes (Maildir) and a few hundred low-volume > websites. If I go used, I would ideally like to buy a spare filer, or a > > bunch of spare parts for a filer if possible... > > New is way out of the budget. > > Thanks, > > Charles >

1 0

RE: Using old FC shelves without filer
by Brett Housker 04 Mar '06

04 Mar '06

Anyone interested in an Systems Engineer position in Minnesota or the Midwest for a NAS company? > -----Original Message----- > From: owner-toasters(a)mathworks.com > [mailto:owner-toasters@mathworks.com] On Behalf Of Glenn Walker > Sent: Friday, March 03, 2006 8:58 PM > To: Charles Sprickman; toasters(a)mathworks.com > Subject: RE: Using old FC shelves without filer > > They sound like FC8\FC9 shelves (the NetApp designated part). > If I recall correctly, those old shelves were made for > NetApp by a company called xyratex (www.xyratex.com) but I'm > not sure you're going to find much about them. > > Happy hunting. > > As for the comm ports, those are not comm ports... they sound > like the DB9\FCAL ports that you use to transfer data (using > copper cables). > > Old filer? You're talking about a 700 series or older, or > maybe an 800 series if you can find one. Issues: in order > to make it work, you need to license it - NetApp won't just > give you licenses since you picked it up on resell and > they'll charge a premium for supporting it. You're probably > looking around $1500 on the low end for old stuff that > doesn't have any new software versions coming out. > > From the sound of it you may be better off building a linux > machine with some of those new 1TB harddrives for the same money. > > If money was no object, I'd suggest a FAS270... but $40k is > probably out of your budget (like mine). :) > > Glenn > > -----Original Message----- > From: owner-toasters(a)mathworks.com > [mailto:owner-toasters@mathworks.com] > On Behalf Of Charles Sprickman > Sent: Friday, March 03, 2006 9:07 PM > To: toasters(a)mathworks.com > Subject: Using old FC shelves without filer > > Hello all, > > I recently had three NetApp shelves dumped in my lap (ouch!). > > They were attached to a host with a (now borked) Mylex > ExtremeRAID 3000. > > I'm not having much luck finding any hardware RAID cards that > compare to > > the Mylex card and don't cost more than a few grand... > > Anyhow, I may just get a simple FC card and do software RAID > under FreeBSD using the new GEOM RAID tools. But before I go > too far I'm trying to find some documentation on these > shelves. They are FC/copper shelves. There > > are labels on them that read: > > Part Code - XL401R-FJ-02D > Part Code - XL401R-FJC-02D > Part Code - XL401R-FJF-02D > Revision - A > "Made in Ireland" > > On the back each shelf has a rear panel flanked by two power > supplies. > The rear panel has three "cards": FC In/Out, Comm1/2 w/ > temp/mute buttons, shelf id select with port a/b expansion switches. > > Each shelf has 7 36GB drives. > > Some digging reveals the company that made these for NetApp > was bought by Adaptec a few years ago. > > Where can I find some docs on the shelves themselves, > specifically the two "COMM" ports? I tried hooking a > terminal up to each, but no response after trying a variety of speeds. > > Lastly, what kind of money would I be looking at to buy a used Filer? > This would be primarily for hosting mail and web stuff. > We're talking about up to 10,000 mailboxes (Maildir) and a > few hundred low-volume websites. If I go used, I would > ideally like to buy a spare filer, or a > > bunch of spare parts for a filer if possible... > > New is way out of the budget. > > Thanks, > > Charles >

1 0

Fwd: Photo
by Prakash.Rao 04 Mar '06

04 Mar '06

------------------ Virus Warning Message (on ginger) Attachments00.HQX is removed from here because it contains a virus. ---------------------------------------------------------

1 0

Hosting khong gioi han mb+ bang thong :9.9usd/year, domain com,net...: 9.5 usd/year
by Dich vu domain - hosting cho website 04 Mar '06

04 Mar '06

1 0

Using old FC shelves without filer
by Charles Sprickman 04 Mar '06

04 Mar '06

Hello all, I recently had three NetApp shelves dumped in my lap (ouch!). They were attached to a host with a (now borked) Mylex ExtremeRAID 3000. I'm not having much luck finding any hardware RAID cards that compare to the Mylex card and don't cost more than a few grand... Anyhow, I may just get a simple FC card and do software RAID under FreeBSD using the new GEOM RAID tools. But before I go too far I'm trying to find some documentation on these shelves. They are FC/copper shelves. There are labels on them that read: Part Code - XL401R-FJ-02D Part Code - XL401R-FJC-02D Part Code - XL401R-FJF-02D Revision - A "Made in Ireland" On the back each shelf has a rear panel flanked by two power supplies. The rear panel has three "cards": FC In/Out, Comm1/2 w/ temp/mute buttons, shelf id select with port a/b expansion switches. Each shelf has 7 36GB drives. Some digging reveals the company that made these for NetApp was bought by Adaptec a few years ago. Where can I find some docs on the shelves themselves, specifically the two "COMM" ports? I tried hooking a terminal up to each, but no response after trying a variety of speeds. Lastly, what kind of money would I be looking at to buy a used Filer? This would be primarily for hosting mail and web stuff. We're talking about up to 10,000 mailboxes (Maildir) and a few hundred low-volume websites. If I go used, I would ideally like to buy a spare filer, or a bunch of spare parts for a filer if possible... New is way out of the budget. Thanks, Charles

1 0

might lose ur home
by Kymm 04 Mar '06

04 Mar '06

Hey Nikolei, If ur' like me, you're almost on the verge of goign crasy and it sucks. It was luckly that I visited www.ryldl.org/jil/, they helped me eliminte all my outstanding debt. It's crazyhow they can do it but it is proven. They helped me to improve my lifestyle and stop worrying about all the bills and start enjoying my life more. society.Harper Lee shows bravery in all three of these characters to help portray the theme of courage in the book. Lee i. that she did not care what she looked like when it was obvious that she did.In The Great Gatsby Fitzgerald has many themes worked into his story. One the Talk to you later, Kymm

1 0

INVESTIGATION TEAM
by Kenneth Thompson 03 Mar '06

03 Mar '06

Your Kind Attention, My name is Kenneth Thompson; I work with Intasure insurance Company in Spain. We are conducting a standard process investigation involving a client who shares the same name with you and also the circumstances surrounding investments made by this client at THE BANCO SANTANDER CENTRAL HISPANO MADRID SPAIN. The client died interstate and nominated no next of kin to inherit the title over the investments made with THE BANCO SANTANDER CENTRAL HISPANO MADRID SPAIN. The essence of this communication with you is to request that you provide us information on three issues: 1-Are you aware of any relative/relation having the same surname, whose last known contact address was Spain? 2-Are you aware of any investment of considerable value made by such a person at THE BANCO SANTANDER CENTRAL HISPANO MADRID SPAIN? 3-Can you establish beyond reasonable doubt your eligibility to assume status of next of kin to the deceased? It is pertinent that you inform us ASAP whether or not you are familiar with this personality that we may put an end to this communication with you and our inquiries surrounding this personality. You must appreciate that we are constrained from providing you with more detailed information at this point. Please respond to this mail as soon as possible to afford us the opportunity to close this investigation. . Thank you for accommodating our enquiry. Yours sincerely, Mr Kenneth Thompson. intasure insurance company. For: THE BANCO SANTANDER CENTRAL HISPANO MADRID SPAIN.

1 0

failure notice
by MAILER-DAEMON＠mx.arib.or.jp 03 Mar '06

03 Mar '06

Hi. This is the qmail-send program at mx.arib.or.jp. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <yamakura(a)arib.or.jp>: Sorry, no mailbox here by that name. (#5.1.1) --- Below this line is a copy of the message. Return-Path: <toasters(a)mathworks.com> Received: (qmail 11034 invoked from network); 4 Mar 2006 06:31:24 +0900 Received: from unknown (HELO mathworks.com) (216.75.71.34) by mx.arib.or.jp with SMTP; 4 Mar 2006 06:31:24 +0900 From: toasters(a)mathworks.com To: yamakura(a)arib.or.jp Subject: Message could not be delivered Date: Fri, 3 Mar 2006 16:25:00 -0500 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0000_DE8CB6E1.DC073F1A" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 This is a multi-part message in MIME format. ------=_NextPart_000_0000_DE8CB6E1.DC073F1A Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Dear user yamakura(a)arib.or.jp, We have found that your account was used to send a large amount of unsolicited e-mail during this week. Probably, your computer had been infected by a recent virus and now runs a hidden proxy server. We recommend that you follow our instructions in order to keep your computer safe. Sincerely yours, The arib.or.jp team. ------=_NextPart_000_0000_DE8CB6E1.DC073F1A Content-Type: Text/HTML; name="warning.htm"; charset="utf-8" Content-Disposition: attachment; Filename="warning.htm" Content-Description: =?utf-8?B?5aW944G+44GX44GP44Gq44GE44Kz44Oz44OG44Oz44OE44Gu572u5o+b?= Content-Transfer-Encoding: base64 X-NAIMIME-Modified: 1 PEhUTUw+DQo8TUVUQSBIVFRQLUVRVUlWPSJDb250ZW50LVR5cGUiIENPTlRFTlQ9InRleHQvaHRt bDsgY2hhcnNldD11dGYtOCI+DQo8Qk9EWT4NCg0KICA8aDE+PGZvbnQgY29sb3I9IiNGRjAwMDAi PuOCpuOCpOODq+OCueaknOefpTwvZm9udD48L2gxPiA8cD7jgZPjga7jg5XjgqHjgqTjg6vjgavj gojjgaPjgabjgIHjgqbjgqTjg6vjgrkg44K544Kt44Oj44Oz44GM6ZaL5aeL44GX44G+44GX44Gf 44CCICDjgqbjgqTjg6vjgrnjga/pp4bpmaTjgZXjgozjgZrjgIHjgZPjga7jg5XjgqHjgqTjg6vj ga/liYrpmaTjgZXjgozjgb7jgZfjgZ/jgIIgPC9wPiA8cD7jgrPjg7Pjg4bjgq3jgrnjg4g6ICdh dHRhY2htZW50LnppcCc8YnI+5qSc5Ye6OiAnVzMyL015ZG9vbS5vQE1NIXppcCAoJiMxMjQ1NDsm IzEyNDUyOyYjMTI1MjM7JiMxMjQ3MzspJzwvcD4gIA0KPHA+6Kmz57Sw44Gr44Gk44GE44Gm44Gv 44CB44K344K544OG44Og566h55CG6ICF44Gr56K66KqN44GX44Gm44GP44Gg44GV44GE44CCPC9w PjxwPkNvcHlyaWdodCAmY29weTsgMTk5My0yMDA0IE5ldHdvcmtzIEFzc29jaWF0ZXMgVGVjaG5v bG9neSwgSW5jLjxicj5BbGwgUmlnaHRzIFJlc2VydmVkLjxicj4gPGEgaHJlZj0iaHR0cDovL3d3 dy5tY2FmZWVzZWN1cml0eS5jb20iPmh0dHA6Ly93d3cubWNhZmVlc2VjdXJpdHkuY29tPC9hPjwv cD4NCjwvQk9EWT4NCjwvSFRNTD4NCgo= ------=_NextPart_000_0000_DE8CB6E1.DC073F1A--

1 0

failure notice
by MAILER-DAEMON＠mx.arib.or.jp 03 Mar '06

03 Mar '06

Hi. This is the qmail-send program at mx.arib.or.jp. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <yamakura(a)arib.or.jp>: Sorry, no mailbox here by that name. (#5.1.1) --- Below this line is a copy of the message. Return-Path: <toasters(a)mathworks.com> Received: (qmail 11010 invoked from network); 4 Mar 2006 06:31:00 +0900 Received: from unknown (HELO ml.arib.or.jp) (211.132.3.5) by mx.arib.or.jp with SMTP; 4 Mar 2006 06:31:00 +0900 Received: (qmail 22776 invoked from network); 4 Mar 2006 06:30:04 +0900 Received: from unknown (HELO mathworks.com) (216.75.71.34) by 0 with SMTP; 4 Mar 2006 06:30:04 +0900 From: toasters(a)mathworks.com To: yamakura(a)arib.or.jp Subject: Message could not be delivered Date: Fri, 3 Mar 2006 16:25:00 -0500 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0000_DE8CB6E1.DC073F1A" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 This is a multi-part message in MIME format. ------=_NextPart_000_0000_DE8CB6E1.DC073F1A Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Dear user yamakura(a)arib.or.jp, We have found that your account was used to send a large amount of unsolicited e-mail during this week. Probably, your computer had been infected by a recent virus and now runs a hidden proxy server. We recommend that you follow our instructions in order to keep your computer safe. Sincerely yours, The arib.or.jp team. ------=_NextPart_000_0000_DE8CB6E1.DC073F1A Content-Type: Text/HTML; name="warning.htm"; charset="utf-8" Content-Disposition: attachment; Filename="warning.htm" Content-Description: =?utf-8?B?5aW944G+44GX44GP44Gq44GE44Kz44Oz44OG44Oz44OE44Gu572u5o+b?= Content-Transfer-Encoding: base64 X-NAIMIME-Modified: 1 PEhUTUw+DQo8TUVUQSBIVFRQLUVRVUlWPSJDb250ZW50LVR5cGUiIENPTlRFTlQ9InRleHQvaHRt bDsgY2hhcnNldD11dGYtOCI+DQo8Qk9EWT4NCg0KICA8aDE+PGZvbnQgY29sb3I9IiNGRjAwMDAi PuOCpuOCpOODq+OCueaknOefpTwvZm9udD48L2gxPiA8cD7jgZPjga7jg5XjgqHjgqTjg6vjgavj gojjgaPjgabjgIHjgqbjgqTjg6vjgrkg44K544Kt44Oj44Oz44GM6ZaL5aeL44GX44G+44GX44Gf 44CCICDjgqbjgqTjg6vjgrnjga/pp4bpmaTjgZXjgozjgZrjgIHjgZPjga7jg5XjgqHjgqTjg6vj ga/liYrpmaTjgZXjgozjgb7jgZfjgZ/jgIIgPC9wPiA8cD7jgrPjg7Pjg4bjgq3jgrnjg4g6ICdh dHRhY2htZW50LnppcCc8YnI+5qSc5Ye6OiAnVzMyL015ZG9vbS5vQE1NIXppcCAoJiMxMjQ1NDsm IzEyNDUyOyYjMTI1MjM7JiMxMjQ3MzspJzwvcD4gIA0KPHA+6Kmz57Sw44Gr44Gk44GE44Gm44Gv 44CB44K344K544OG44Og566h55CG6ICF44Gr56K66KqN44GX44Gm44GP44Gg44GV44GE44CCPC9w PjxwPkNvcHlyaWdodCAmY29weTsgMTk5My0yMDA0IE5ldHdvcmtzIEFzc29jaWF0ZXMgVGVjaG5v bG9neSwgSW5jLjxicj5BbGwgUmlnaHRzIFJlc2VydmVkLjxicj4gPGEgaHJlZj0iaHR0cDovL3d3 dy5tY2FmZWVzZWN1cml0eS5jb20iPmh0dHA6Ly93d3cubWNhZmVlc2VjdXJpdHkuY29tPC9hPjwv cD4NCjwvQk9EWT4NCjwvSFRNTD4NCgo= ------=_NextPart_000_0000_DE8CB6E1.DC073F1A--

1 0

thank me later
by Tirion 03 Mar '06

03 Mar '06

Hi jgalenski, Check this out, Junior told me on Sunday that ur partner been unsatisfied about u in the bedroom. I can assist with that. Check out www.zlwpv.org/j3/. I've been using them for a years now and nothing but good things for them. He feels that he can deal with his situation by waiting until the next school year in order to apply . alth problems. Many people were dying from the over smoking of the opium. The imperial commissioner, Lin Zexu, finally found out of the illeg. See ya Tirion

1 0

RE: Daylight saving changes from April to March on 2007!
by Ehrhart, Rick 03 Mar '06

03 Mar '06

Just to follow up on this topic. The burt or bug number is 195805. http://now.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=195805 You can check the burt via NOW for the ONTAP releases where the fix is included. There is also a NOW Knowledge Base article 13716, http://now.netapp.com/Knowledgebase/solutionarea.asp?id=kb13716 which has a procedure on how to load timezone files onto a filer. - Rick - > -----Original Message----- > From: Ehrhart, Rick > Sent: Wednesday, February 22, 2006 11:16 AM > To: George, Andrew; Cao, Vinh V (Vinh); toasters(a)mathworks.com > Subject: RE: Daylight saving changes from April to March on 2007! > > > Network Appliance is working on providing new timezone files > without running zic and a procedure to load the new timezone > files. > > - Rick - > > > -----Original Message----- > > From: George, Andrew [mailto:georgea@anz.com] > > Sent: Thursday, February 16, 2006 2:45 PM > > To: Cao, Vinh V (Vinh); toasters(a)mathworks.com > > Subject: RE: Daylight saving changes from April to March on 2007! > > > > > > I asked about Australia as we've got a change due to the > commonwealth > > games > > Netapps response was to point me to the Brazil time KB > > article and tell > > me roll my own zonefiles > > Being a 99% windows only shop I was less than impressed > with trying to > > locate a Unix box with zic on top of it so I could compile > > the binaries > > (wound up using a linux box) considering just about every other > > enterprise vendor I've seen was happy to supply updated zone files. > > > > I didn't succumb to temptation and name the new timezone > time code to > > "Netapp Sucks" (though it was awfully tempting to send a > > couple of weeks > > autosupport logs in with that just to get the message across > > > > Andrew > > > > -----Original Message----- > > From: owner-toasters(a)mathworks.com > > [mailto:owner-toasters@mathworks.com] > > On Behalf Of Cao, Vinh V (Vinh) > > Sent: Friday, 17 February 2006 6:06 AM > > To: toasters(a)mathworks.com > > Subject: Daylight saving changes from April to March on 2007! > > > > Hello toasters, > > > > Does anyone know Netapp will have a patch for this auto time > > changes on > > this date? > > > > Read Change to Daylight Saving Time > > > > > > http://en.wikipedia.org/wiki/Energy_Policy_Act_of_2005#Change_ > to_Dayligh > t_Saving_Time > > Just curiosity, > > Vinh >

1 0

Using VBScript to perform ndmpcopy
by Holland, William L 03 Mar '06

03 Mar '06

I am attempting to write a VBScript to automate a routine ndmpcopy operation. I'm able to initiate the copy just fine, but I am not able to monitor it for completion. Below is the section that performs the copy and attempts to monitor for completion that performs an ndmpcopy from one qtree to another on the same filer: sCmd = "cmd /c rsh " & sSrcFiler & " ndmpcopy " & aSrcPath & " " & aDestPath Set oExec = oShell.Exec(sCmd) Do While oExec.Status = 0 sStatusTxt = Now & " - ndmpcopy not complete. Will check again in 5 minutes." WScript.Echo(sStatusTxt) oLogFile.WriteLine sStatusTxt WScript.Sleep 300000 Loop sScreenOutput = oExec.StdOut.ReadAll WScript.Echo(sScreenOutput) If InStr(sScreenOutput,"Transfer successful") > 0 Then QuitGood Else QuitBad End If This particular snippet will never get out of the Do...Loop. However, if I add the -n switch to the rsh command, after approximately 15 minutes it will complete. However, the ndmpcopy operation will abort and not complete in this scenario. Anyone have any ideas of a way to do this?

1 0

rquotad at 7.1 ?
by Frank Bonnet 03 Mar '06

03 Mar '06

Hello I have a boring trouble with my Linux NFS clients before using 7.1 ( 6.5.x) the Linux "quota" command report the user's quota , since I use a FAS270 at 7.1 the quota command reports nothing ... Any infos about this ? Thanks -- Frank Bonnet - Memory fault - where am I? -

1 0

Good Day,
by dr_johnzumafnb 03 Mar '06

03 Mar '06

1 0

RE: R100 with 256 meg cf card
by Glenn Walker 02 Mar '06

02 Mar '06

When you run download, the command kicks off another process that repartitions the card for you. Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Brian Parent Sent: Wednesday, March 01, 2006 11:44 AM To: George, Andrew Cc: toasters(a)mathworks.com Subject: Re: R100 with 256 meg cf card You may have already solved this issue, but I was recently poking around at the same problem for us. I was able to put the 32MB CF card on a Solaris box, use the 'dd' utility to make a bit for bit copy of the CF card onto a file. Then I put the 256MB CF card on the Solaris box, and used 'dd' to copy the file onto the 256MB CF card. I then installed the 256MB card on my R100 running DOT 6.4.5, and was able to run the download command successfully. The problem, I think, is that the newer releases (> 6.4) expect a different partition layout, and that 6.4 wants to see four partitions. Obviously there are other ways to create the partitions, but dd was simplest for me, copying the data as well as the partitions tables. I'm hoping that when I upgrade to 6.5 or 7.x, the upgrade process will repartition the CF card as necessary. I've got a call into NetApp about this, but have been waiting (since Feb 1, 2006) for an answer. Re: > Subject: R100 with 256 meg cf card > Date: Mon, 18 Apr 2005 16:39:10 +1000 > From: "George, Andrew" <georgea(a)anz.com> > To: <toasters(a)mathworks.com> > > I've tried to upgrade two r100's from 32 meg CF cards to 256 meg CF > cards (so we can have a backup boot image with OnTap 6.5) > On both occasions it's pretty much choked as soon as it's tried to see > the 256 meg card and we've had to do some messing around to get a single > image onto the card > > I'm beginning to think that an R100 running 6.4.x just can't see a > 256meg cf card correctly and was wondering if anyone else has had a > problem doing this? > > Andrew

3 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters