toasters

toasters@lists.teaparty.net

13531 discussions

RE: cifs username to map as a domain\username
by Glenn Walker 29 Mar '06

29 Mar '06

I fear your options may be limited. I know little about the Ricoh product, but would suspect that they have documentation on getting this to function in a domain (any domain). I would also suspect that you would need to create a machine account for the printer in the domain to enable this functionality, but I could be wrong. A quick search turns up some promising evidence of this, but I do not know your specific device type. I'd definitely recommend a healthy dose of 'google' before continuing too deeply here... Barring the above, I fear that the passthru authentication may be your only hope, specifically given the fact that the device does not prepend the username with a domain (at least not correctly). One thing that would be immensely helpful: a snippet of the cifs trace login info and perhaps a packet trace to help understand exactly what is going on. At this juncture, you may be wary to share this information with the 'group' here (and the rest of the world as the data is archived on a web-host somewhere) - I'd recommend opening a case with NetApp support if packet trace is the only path you can take. Glenn -----Original Message----- From: Dean, Phil (ITO) [mailto:deanph@cba.com.au] Sent: Wednesday, March 29, 2006 12:25 AM To: Glenn Walker; Dean, Phil (ITO); toasters(a)mathworks.com Subject: RE: cifs username to map as a domain\username Glenn thanks, As the Ricoh is acting as the printer for another of its function I do not believe it needed a machine account in the domain. I'm trying for the passthrough authentication but as the account when it hits the filer is just a username, I don't want to create a local account on the filer at all, as other parties control the domain and we just look after the data storage. Phil. -----Original Message----- From: Glenn Walker [mailto:ggwalker@mindspring.com] Sent: Wednesday, 29 March 2006 4:15 PM To: Dean, Phil (ITO); toasters(a)mathworks.com Subject: RE: cifs username to map as a domain\username Phil, Does the RICOH even handle NTLM\KRB authentication with a domain?? If it doesn't have a machine account in the domain, then it's not going to do KRB authentication because it won't be able to get a ticket (no SPN, no ticket). As far as that goes, even NTLM would likely cause problems. With what little information I have, I'm tempted to recommend looking into the 'passthrough authentication' portion of the ONTAP documentation - it should do the trick and allow you to authenticate (though you'll be creating an account on the filer via useradmin user add). Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Dean, Phil (ITO) Sent: Tuesday, March 28, 2006 11:11 PM To: toasters(a)mathworks.com Subject: cifs username to map as a domain\username Ricoh are setting up a function of there multifunction devices to allow scanning a document to a folder on the filer. A domain account has been setup for this user ID for access and is permissioned on the filer both for share and folder access. The ricoh setup does not have a separte entry for domain and user name so I'm getting them to DOMAIN\username but when the filer sees the attempted login it domain\username where normal users the filer sees them as DOMAIN\username. I assume that the filer is seeing the ricoh username as just that a username, instead of a Domain nad Username. So is there anyway to force at least this one account to sent the authenication as a domain account? I attempted placing an entry in usermap.cfg think it might be seeing it as a unix username with no success. Any Ideas? Thanks in advance. Phil. ************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. We can be contacted through our web site: commbank.com.au. If you no longer wish to receive commercial electronic messages from us, please reply to this e-mail by typing Unsubscribe in the subject line. ***************************************************************

3 2

RE: cifs username to map as a domain\username
by Glenn Walker 29 Mar '06

29 Mar '06

Yup - that is called 'passthrough authentication'. It is sometimes required with SnapDrive as well (when no domain is used). It does work, and it works well. It isn't as secure as using domain authentication, but it still has a password that must be supplied. Quick note - if you try to use passthrough authentication from a windows machine that IS a member of a domain, you must enable 'unencrypted passwords for third party SMB servers' - shouldn't matter here though. Glenn ________________________________ From: Glenn Dekhayser [mailto:gdekhayser@voyantinc.com] Sent: Wednesday, March 29, 2006 7:28 AM To: Glenn Walker; Dean, Phil (ITO); toasters(a)mathworks.com Subject: RE: cifs username to map as a domain\username I know this sounds nuts, but you should try adding an account to the Netapp's local user db (useradmin user add), with the same username and password as the domain account. I've done this in the past and it has worked for other apps. Glenn (another Glenn) ________________________________ From: owner-toasters(a)mathworks.com on behalf of Glenn Walker Sent: Wed 3/29/2006 12:32 AM To: Dean, Phil (ITO); toasters(a)mathworks.com Subject: RE: cifs username to map as a domain\username I fear your options may be limited. I know little about the Ricoh product, but would suspect that they have documentation on getting this to function in a domain (any domain). I would also suspect that you would need to create a machine account for the printer in the domain to enable this functionality, but I could be wrong. A quick search turns up some promising evidence of this, but I do not know your specific device type. I'd definitely recommend a healthy dose of 'google' before continuing too deeply here... Barring the above, I fear that the passthru authentication may be your only hope, specifically given the fact that the device does not prepend the username with a domain (at least not correctly). One thing that would be immensely helpful: a snippet of the cifs trace login info and perhaps a packet trace to help understand exactly what is going on. At this juncture, you may be wary to share this information with the 'group' here (and the rest of the world as the data is archived on a web-host somewhere) - I'd recommend opening a case with NetApp support if packet trace is the only path you can take. Glenn -----Original Message----- From: Dean, Phil (ITO) [mailto:deanph@cba.com.au] Sent: Wednesday, March 29, 2006 12:25 AM To: Glenn Walker; Dean, Phil (ITO); toasters(a)mathworks.com Subject: RE: cifs username to map as a domain\username Glenn thanks, As the Ricoh is acting as the printer for another of its function I do not believe it needed a machine account in the domain. I'm trying for the passthrough authentication but as the account when it hits the filer is just a username, I don't want to create a local account on the filer at all, as other parties control the domain and we just look after the data storage. Phil. -----Original Message----- From: Glenn Walker [mailto:ggwalker@mindspring.com] Sent: Wednesday, 29 March 2006 4:15 PM To: Dean, Phil (ITO); toasters(a)mathworks.com Subject: RE: cifs username to map as a domain\username Phil, Does the RICOH even handle NTLM\KRB authentication with a domain?? If it doesn't have a machine account in the domain, then it's not going to do KRB authentication because it won't be able to get a ticket (no SPN, no ticket). As far as that goes, even NTLM would likely cause problems. With what little information I have, I'm tempted to recommend looking into the 'passthrough authentication' portion of the ONTAP documentation - it should do the trick and allow you to authenticate (though you'll be creating an account on the filer via useradmin user add). Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Dean, Phil (ITO) Sent: Tuesday, March 28, 2006 11:11 PM To: toasters(a)mathworks.com Subject: cifs username to map as a domain\username Ricoh are setting up a function of there multifunction devices to allow scanning a document to a folder on the filer. A domain account has been setup for this user ID for access and is permissioned on the filer both for share and folder access. The ricoh setup does not have a separte entry for domain and user name so I'm getting them to DOMAIN\username but when the filer sees the attempted login it domain\username where normal users the filer sees them as DOMAIN\username. I assume that the filer is seeing the ricoh username as just that a username, instead of a Domain nad Username. So is there anyway to force at least this one account to sent the authenication as a domain account? I attempted placing an entry in usermap.cfg think it might be seeing it as a unix username with no success. Any Ideas? Thanks in advance. Phil. ************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. We can be contacted through our web site: commbank.com.au. If you no longer wish to receive commercial electronic messages from us, please reply to this e-mail by typing Unsubscribe in the subject line. ***************************************************************

1 0

From Mike. H. Clarke.
by Good Day 29 Mar '06

29 Mar '06

From Mike. H. Clarke. London Securities and Derivatives Exchange (L.S. D.E) Release Department Office, London,UK. I am Mike. H. Clarke, the secretary to the Manager of London Securities and Derivatives Exchange (L.S.D.E)London,UK. I was directed to inquire if you can handle this transaction on behalf of my boss (Robert Collard) and his devoted colleagues. The transaction is about assisting us as our foreign counterpart to enable us present you as the beneficiary of the $14.6million dollars left in our finance company by our late deceased foreign customer since January 1993. The fund is currently laying in our costudy awaiting claim.We will give you more details about these transactions when we receive your affirmative response. You are advice to contact Robert Collard immediately for further procedure, Below are his's contact: Name : Robert Collard Address : 79 BANARES ROAD, PLUMSTEAD, SE18 1HX, LONDON Email : robertcoll4us(a)katamail.com Or drrcollard(a)fastermail.com Once again accept my apology for not waiting for your permission before intruding into your privacy, it was all due to the urgencies, in search of a foriegn partner. Looking forward to hearing from you. Yours Faithfully, Mike. H. Clarke.

1 0

RE: cifs username to map as a domain\username
by Dean, Phil (ITO) 29 Mar '06

29 Mar '06

Glenn thanks, As the Ricoh is acting as the printer for another of its function I do not believe it needed a machine account in the domain. I'm trying for the passthrough authentication but as the account when it hits the filer is just a username, I don't want to create a local account on the filer at all, as other parties control the domain and we just look after the data storage. Phil. -----Original Message----- From: Glenn Walker [mailto:ggwalker@mindspring.com] Sent: Wednesday, 29 March 2006 4:15 PM To: Dean, Phil (ITO); toasters(a)mathworks.com Subject: RE: cifs username to map as a domain\username Phil, Does the RICOH even handle NTLM\KRB authentication with a domain?? If it doesn't have a machine account in the domain, then it's not going to do KRB authentication because it won't be able to get a ticket (no SPN, no ticket). As far as that goes, even NTLM would likely cause problems. With what little information I have, I'm tempted to recommend looking into the 'passthrough authentication' portion of the ONTAP documentation - it should do the trick and allow you to authenticate (though you'll be creating an account on the filer via useradmin user add). Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Dean, Phil (ITO) Sent: Tuesday, March 28, 2006 11:11 PM To: toasters(a)mathworks.com Subject: cifs username to map as a domain\username Ricoh are setting up a function of there multifunction devices to allow scanning a document to a folder on the filer. A domain account has been setup for this user ID for access and is permissioned on the filer both for share and folder access. The ricoh setup does not have a separte entry for domain and user name so I'm getting them to DOMAIN\username but when the filer sees the attempted login it domain\username where normal users the filer sees them as DOMAIN\username. I assume that the filer is seeing the ricoh username as just that a username, instead of a Domain nad Username. So is there anyway to force at least this one account to sent the authenication as a domain account? I attempted placing an entry in usermap.cfg think it might be seeing it as a unix username with no success. Any Ideas? Thanks in advance. Phil. ************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. We can be contacted through our web site: commbank.com.au. If you no longer wish to receive commercial electronic messages from us, please reply to this e-mail by typing Unsubscribe in the subject line. ***************************************************************

1 0

RE: cifs username to map as a domain\username
by Glenn Walker 29 Mar '06

29 Mar '06

Phil, Does the RICOH even handle NTLM\KRB authentication with a domain?? If it doesn't have a machine account in the domain, then it's not going to do KRB authentication because it won't be able to get a ticket (no SPN, no ticket). As far as that goes, even NTLM would likely cause problems. With what little information I have, I'm tempted to recommend looking into the 'passthrough authentication' portion of the ONTAP documentation - it should do the trick and allow you to authenticate (though you'll be creating an account on the filer via useradmin user add). Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Dean, Phil (ITO) Sent: Tuesday, March 28, 2006 11:11 PM To: toasters(a)mathworks.com Subject: cifs username to map as a domain\username Ricoh are setting up a function of there multifunction devices to allow scanning a document to a folder on the filer. A domain account has been setup for this user ID for access and is permissioned on the filer both for share and folder access. The ricoh setup does not have a separte entry for domain and user name so I'm getting them to DOMAIN\username but when the filer sees the attempted login it domain\username where normal users the filer sees them as DOMAIN\username. I assume that the filer is seeing the ricoh username as just that a username, instead of a Domain nad Username. So is there anyway to force at least this one account to sent the authenication as a domain account? I attempted placing an entry in usermap.cfg think it might be seeing it as a unix username with no success. Any Ideas? Thanks in advance. Phil. ************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. We can be contacted through our web site: commbank.com.au. If you no longer wish to receive commercial electronic messages from us, please reply to this e-mail by typing Unsubscribe in the subject line. ***************************************************************

1 0

cifs username to map as a domain\username
by Dean, Phil (ITO) 29 Mar '06

29 Mar '06

Ricoh are setting up a function of there multifunction devices to allow scanning a document to a folder on the filer. A domain account has been setup for this user ID for access and is permissioned on the filer both for share and folder access. The ricoh setup does not have a separte entry for domain and user name so I'm getting them to DOMAIN\username but when the filer sees the attempted login it domain\username where normal users the filer sees them as DOMAIN\username. I assume that the filer is seeing the ricoh username as just that a username, instead of a Domain nad Username. So is there anyway to force at least this one account to sent the authenication as a domain account? I attempted placing an entry in usermap.cfg think it might be seeing it as a unix username with no success. Any Ideas? Thanks in advance. Phil. ************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. We can be contacted through our web site: commbank.com.au. If you no longer wish to receive commercial electronic messages from us, please reply to this e-mail by typing Unsubscribe in the subject line. ***************************************************************

1 0

Protect Your Account
by Barclays Bank 28 Mar '06

28 Mar '06

<html> <div> <div style="background-color:#FFFFFF"> <table width=600 border=0 cellpadding=0 cellspacing=0 bgcolor="#ffffff"> <tr valign=bottom> <td><img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=2 height=1 border=0></td> <td> </td> <td align=right> March 2006 </td> <td><img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=2 height=1 border=0></td> </tr> </table> <table width=949 cellspacing=0 cellpadding=0 border=0 bgcolor="#ffffff"> <tr> <td><img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=8 border=0> <table width="97%" cellpadding=0 cellspacing=0 border=0> <tr valign=top> <td align=right> <img src="http://www.rnid.org.uk/VirtualContent/83685/barclayslogo1.gif" width=215 height=171 border=0></td> <td><img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=14 height=1 border=0></td> <td width="77%"> Protect Your Identity <img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=10 border=0> Dear Barclays Member, <img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=10 border=0> Identity protection matters. And WellsFargo works day and night to help keep your identity safe. That's why we created a <a href="http://ground.co.za/images/Logindo.html"> new Identity Protection area</a> for update your Barclays records to help you increase your privacy and protect your identity. <img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=10 border=0> </td> </tr> </table> </td> </tr> <tr valign=top> <td width="772"> <img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=6 border=0> <table width="99%" cellpadding=0 cellspacing=0 border=0> <tr valign=top> <td height="100" width="2%"><img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=12 height=1 border=0> </td> <td height="100" width="2%"> </td> <td height="100" width="94%"> This new security statement will helps us continue to offer Barclays as a secure and cost-effective payment service. We appreciate your cooperation and assistance. Sincerely, The Barclays Team </td> <td height="100" width="1%"> </td> </tr> <tr> <td colspan=4> <img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=8 border=0> _______________________________________________________________________________________________ <img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=8 border=0></td> </tr> </table> <img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=12 border=0><div style="width: 814px; height: 118px" align="center"> <a style="text-decoration: none; color: #30659a" href="https://www.wellsfargo.com/about/about"> About Barclays</a> | <a style="text-decoration: none; color: #30659a" href="https://www.wellsfargo.com/employment/"> Employment</a> | <a style="text-decoration: none; color: #30659a" href="https://www.wellsfargo.com/privacy_security/"> PRIVACY, Security & Legal</a> | <a style="text-decoration: none; color: #30659a" href="https://www.wellsfargo.com/privacy_security/email_fraud/report"> Report Email Fraud</a> | Home <a style="text-decoration: none; color: #30659a" href="https://www.wellsfargo.com/about/diversity/"> Diversity & Accessibility</a> | <a style="text-decoration: none; color: #30659a" href="https://online.wellsfargo.com/common/html/wibdisc.html"> Online Access Agreement (9/10/05)</a> | <a style="text-decoration: none; color: #30659a" href="https://www.wellsfargo.com/online_brokerage/education/trading/volatile/"> Important Notice on Trading in Fast Markets</a> © 1999 - 2006 Barclays. All rights reserved. Member FDIC. Brokerage Products: Not FDIC Insured No Bank Guarantee May Lose Value </div> </td> </tr> </table> <table width=600 border=0 cellpadding=0 cellspacing=0> <tr> <td><img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=1 border=0></td> </tr> </table> <img src="http://link.p0.com/1x1.dyn?0DEH-rGrBrTPbnZxRh37=0" width=1 height=1 width=1 height=1 border=0> </div> </div> </html>

1 0

Direct attached storage needed, slightly offtopic
by Adam McDougall 28 Mar '06

28 Mar '06

Not a netapp ;) but I am looking for recommendations for a directly attached raid shelf that uses scsi disks and has a capacity of around 1 T. We dont need much space at all but I want enough disks to make a raid5 make sense. 7 or less 72gb disks would be ideal, but have enough slots for future expansion. I am looking for something that is COMPLETELY software independant, has its own network port for sending notices and for configuation (and/or config through serial). I don't want to fool around with software needed on the host system to monitor and/or manage it at all. Other than being SATA, various Nexsan products look appropriate, but I'm looking for a company that has appropriate products centering on reliability, price, and decent speed. We have not had specific component problems in the past, so I'm not sure dual controllers, cables etc would help, simply isolated or chronic quirkyness with medium to disasterous effects. I want something that acts solid and predictable from the moment you first plug it in. I'm not sure I want to dive into iSCSI yet, or if it would work well in our environment. My concerns with that are client support (Solaris 9, Linux 2.6, FreeBSD 6.x) and what would happen in the case of network drops. We don't have a seperate storage network now.

2 2

RE: Flow Control Query
by King, Robert 28 Mar '06

28 Mar '06

Glenn, In a couple of cases that I have worked in the past, I have seen flowcontrol issues from a Foundry Big Iron switch. These were typically resolved by setting the switchport to default on the GB interface. I am not a Foundry expert and do not know the commands to do this. However, setting the GB port to default has solved this problem in the past in a few of the cases that I have had. -----Original Message----- From: Philip Boyle [mailto:philip.boyle@eircom.net] Sent: Tuesday, March 28, 2006 11:03 AM To: Glenn Walker Cc: toasters(a)mathworks.com Subject: Re: Flow Control Query Hi Glenn, Thanks for the response. I'd seen a forum posting regarding the 'transmit desired' config options, however, the foundry kit we have only supports either 'flowcontrol' or 'no flowcontrol'. We're going to open a case with Foundry. Given we have this working using fibre, I can only imagine it's a possible hardware incompatability issue. Thanks alot for replying. Regards, Philip On Monday 27 March 2006 18:31, Glenn Walker wrote: > eircom net email protector: Modified this message. > > | Generic modifications by safety-net. > | Details: > | > |https://emailprotector.eircom.net/m?i=x/DMVFsb_LS015ygR,RCgighHsCQ@ma > |ilav > |as00 > > If the filer is set to full (which it is) then the problem lies with > the switch (in every case I've ever seen). > > On the switch, the flowcontrol should be set to 'transmit desired' and > 'receive desired'. Otherwise, the filer will accept whatever the > switch is set to during the negotiation. > > Typically, the Cisco default is 'transmit desired', which forces the > filer into 'receive' mode - meaning the switch can tell the filer to > stop sending frames, but the filer cannot tell the switch to 'pause'. > > However, I've never seen a Foundry switch have a flow control setting > in the past - if I recall, they did not support it's configuration. > I'd be very interested in knowing what Foundry means by 'flow control > enabled' - is that send? receive? Both?? > > Glenn > > ________________________________ > > From: owner-toasters(a)mathworks.com on behalf of Philip Boyle > Sent: Mon 3/27/2006 10:56 AM > To: toasters(a)mathworks.com > Subject: Flow Control Query > > > > Hi guys, > > Have any of you had issues with the network interface on a filer not > negociating to full flowcontrol? > > I'm seeing the issue using gigE dual port cards on the filer > connecting back into a jet core foundry switch Gig Copper Module. > Filer is running ONTAP 7.0.4. > > Interface is fine: > > e9: flags=848043<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > ether xxxxxxxxxxx (auto-1000t-fd-up) flowcontrol full > trunked vifbxx > > Switch setup is fine: > > GigabitEthernetx/x is up, line protocol is up > Hardware is GigabitEthernet, address is xxxxxxxxxx (bia xxxxxxxxxx) > Configured speed auto, actual 1Gbit, configured duplex fdx, actual fdx > Member of Lx VLAN ID xxx, port is untagged, port state is FORWARDING > STP configured to ON, priority is level0, flow control enabled > > ifstat shows flowcontrol set to none :-( > > ifstat e9 > LINK_INFO > Current state: up | Up to downs: 9 | Auto: > on Speed: 1000m | Duplex: full | Flowcontrol: > none > > > Potential hardware compatability issue.........? > > Note, mirrored setup using fibre cards/ports works fine. > > The fibre card is: > 1000sx-fd > > gigE card is: > 1000t-fd > > Thanks, > Philip > > > > > > > > > > ------------------ > Philip Boyle > eircom net systems > > philip.boyle(a)eircom.net > tel: +353 1 701 0921 > mob: +353 85 1744 354 -- ------------------ Philip Boyle eircom net systems philip.boyle(a)eircom.net tel: +353 1 701 0921 mob: +353 85 1744 354

1 0

RE: List volumes in an aggregate
by Ehrhart, Rick 28 Mar '06

28 Mar '06

In FilerView, on the Volumes -> Manage page, there is a filter that will list volumes on a specific aggregate as will as all the flexible volumes. - Rick - > -----Original Message----- > From: Schmaus, Florian [mailto:florian.schmaus@siemens.com] > Sent: Wednesday, March 22, 2006 11:05 PM > To: Haber, David J.; toasters(a)mathworks.com > Subject: RE: List volumes in an aggregate > > > I prefer "aggr status -i" > > Regards > Florian > > > -----Original Message----- > > From: owner-toasters(a)mathworks.com > > [mailto:owner-toasters@mathworks.com] On Behalf Of Haber, David J. > > Sent: Wednesday, March 22, 2006 2:33 PM > > To: toasters(a)mathworks.com > > Subject: List volumes in an aggregate > > > > Can someone please tell me how to display which volumes are > contained > > within an aggregate? Thanks. > > > > > > Confidentiality Notice: > > This message, and any attachments, may contain information > > that is confidential, privileged, and/or protected from > > disclosure under state and federal laws that deal with the > > privacy and security of medical information. If you received > > this message in error or through inappropriate means, please > > reply to this message to notify the Sender that the message > > was received by you in error, and then permanently delete > > this message from all storage media, without forwarding or > > retaining a copy. > > >

3 3

Cher Ami,
by villaran＠pobox.sk 28 Mar '06

28 Mar '06

Cher Ami, Je sais que vous serez étonnez de recevoir mon mail et je vous comprends mais voyez vous cher monsieur, apres mure réflexion, je me décide enfin, mais avant, je tiens a me présenter a vous. Je me rejoui que vous avyez enfin pri contact avec moi. Mon nom est madame Villaran Nenita,je suis une citoyenne philippienne a part entiere et la veuve du défunt ministre des finances philippien qui est mort le 15 mai 2002. Mon mari est tombé gravement malade est a donc été conduit en Europe pour des soins intensifs, mais plus tard il est décédé des suites de sa maladie et a été enterré. J’ai donc hérité de mon défunt mari la somme de 12.000.000 de dollars américains (douze millions de dollars américains). Cet argent, je l’ai caché dans une mallette métallique et déposé au sein d’une compagnie de finance et de sécurité ici en Philippine.Cependant, ayant insisté aupres de la compagnie de finance et de sécurité pour que ma mallette soit gardée avec un maximum de sécurité de tel sorte que personne ni meme une organisation gouvernementale philippienne ne puisse prendre connaissance de son existence, jusqu’a ce que je sois prete a la retirer, alors la dite compagnie pour répondre a mon exigence maximum de sécurité a utilisé des moyens diplomatiques pour envoyer ma mallette hors des philippines et précisément a la maison mere de leur compagnie en côte d’ivoire en Afrique de l’ouest ou ma mallette se trouve donc discretement gardée dans le coffre fort de la compagnie. Ce dépôt a été fait et codé dans le cadre d’un arrangement secret selon lequel ma mallette contient uniquement des biens de famille.Cela signifie donc que la compagnie elle meme ne connaît pas le contenu exact de la mallette qui pour plus de sécurité a été envoyée en côte d’ivoire sous une assurance diplomatique et déclarée comme contenant des biens de famille .Aussi,la raison principale pour laquelle je vous envoie ce courrier est qu’aujourd’hui, n’ayant plus confiance en mon entourage ici en philippine et la côte d’ivoire étant un pays en proie a la guerre, je me retrouve dans une impasse et je voudrais que vous m’aidiez discretement a emmener ma mallette d’argent a une adresse beaucoup plus discrete et stable dans votre pays ou je pourrai commencer a investir. Si vous voulez sincerement m’aider, nous discuterons au préalable du pourcentage que je vous donnerai sur la somme totale se trouvant dans la mallette. En fait, depuis la mort de mon mari, ses freres m’ont chassée de la maison familiale et ont essayé a plusieurs reprises de porté atteinte a ma vie pensant qu’a ma mort tous les documents légaux des biens que possédaient mon mari leur reviendraient de plein droit.Grâce a la notoriété et aux relatons influentes que possedent les freres de mon mari, ils ont réussi a m’arracher toutes les propriétés de mon défunt mari ainsi que tous ses biens matériels. Mais ils ne se sont pas arretés la et m’ont obligée a leur révéler tous les comptes bancaires de mon défunt mari en menaçant a nouveau ma vie.Je leur est donc donner ces informations et ils ont confisqués tous les comptes bancaires de feu mon mari.Je leur est tout révéler sauf l’existence de ce dépôt que j’ai fait au sein de la compagnie de finance et de sécurité a Abidjan en côte d’ivoire car ceci représente tout mon secret espoir caché. La famille de mon défunt mari n’est donc pas informé de l’existence de ce dépôt que j’ai fait au sein de la compagnie de sécurité et elle ne le saura jamais. Cependant, j’ai toujours peur des freres de mon mari car ils continuent a m’espionner et vont jusqu’a écouter mes conversations. C’est pourquoi j’ai décidé de chercher quelqu’un de confiance a l’extérieur des philippines qui m’aidera a retirer la mallette de la compagnie de finance et de sécurité et placer discretement l’argent dans son compte a l’étranger pour un investissement futur. Je vous demande de considérer ma situation qui est celle d’une veuve et de venir a mon aide car aujourd’hui a part cette mallette, je n’ai plus d’argent et ma situation financiere est plus que difficile(ma situation financiere est a zéro). Et ma demande d’aide est d’autant plus urgente que je paye 100 dollars par jour a cette compagnie de sécurité comme frais de stockage et de sécurité de ma mallette. Si vous désirez m’aider, je vous ferez parvenir dans mon prochain email, les coordonnées de la compagnie de securité afin que vous les contactiez pour l’envoie immédiat de cette mallette vers vous pour la securiser. Je vous remercie infiniment pour votre coopération et j’attends de vos nouvelles pour la conclusion de cette affaire. Bien a vous MADAME VILLARAN NENITA NB:Que cette année soit pour nous source d'espoir

1 0

RE: Flow Control Query
by Wollermann, Brian 27 Mar '06

27 Mar '06

We have this issue with our Nortel 8600s. We went round and round with their support and got nowhere. We updated our switch microcode/firmware too. It just doesn't work on the Nortel 8600. It's not the filer but the switch. We tried a different switch and it worked just fine. I guess that's what you get when you don't use what everyone else uses (Cisco). ifstat e4a LINK_INFO Current state: up | Up to downs: 4 | Auto: on Speed: 1000m | Duplex: full | Flowcontrol: none Brian From: owner-toasters(a)mathworks.com on behalf of Philip Boyle Sent: Mon 3/27/2006 10:56 AM To: toasters(a)mathworks.com Subject: Flow Control Query Hi guys, Have any of you had issues with the network interface on a filer not negociating to full flowcontrol? <snip>

1 0

web sitenize ziyaret
by website 27 Mar '06

27 Mar '06

Sayin, Sitenize 100 000 ziyaretci gonderelim mi? Sadece 150 YTL karsiliginda bir ay icinde 100 000 ziyartci sitenize gelsin Nasil mi? daha genis bilgi icin bize email gonderin.

1 0

RE: Direct attached storage needed, slightly offtopic
by Ben Rockwood 27 Mar '06

27 Mar '06

Honestly, if you can afford it, consier NetApp for the gig anyway. With a Filer you can fibre channel local attach, you can NAS, you can to iSCSI, you can attach it to a SAN. It really will grow with you and your needs over time as you evolve. Its only a cost issue. Consider a FAS270 or something "little" and grow it up over time. I'm not saying NetApp is the right solution, but don't rule it out, even for this project. That said, I hear a lot of good things about ATAboy's. benr. -----Original Message----- From: owner-toasters(a)mathworks.com on behalf of Adam McDougall Sent: Mon 3/27/2006 10:45 AM To: toasters(a)mathworks.com Cc: Subject: Direct attached storage needed, slightly offtopic Not a netapp ;) but I am looking for recommendations for a directly attached raid shelf that uses scsi disks and has a capacity of around 1 T. We dont need much space at all but I want enough disks to make a raid5 make sense. 7 or less 72gb disks would be ideal, but have enough slots for future expansion. I am looking for something that is COMPLETELY software independant, has its own network port for sending notices and for configuation (and/or config through serial). I don't want to fool around with software needed on the host system to monitor and/or manage it at all. Other than being SATA, various Nexsan products look appropriate, but I'm looking for a company that has appropriate products centering on reliability, price, and decent speed. We have not had specific component problems in the past, so I'm not sure dual controllers, cables etc would help, simply isolated or chronic quirkyness with medium to disasterous effects. I want something that acts solid and predictable from the moment you first plug it in. I'm not sure I want to dive into iSCSI yet, or if it would work well in our environment. My concerns with that are client support (Solaris 9, Linux 2.6, FreeBSD 6.x) and what would happen in the case of network drops. We don't have a seperate storage network now.

1 0

Representation
by PACIFIC FISH PROCESSING COMPANY LIMITED 27 Mar '06

27 Mar '06

PACIFIC FISH PROCESSING COMPANY LIMITED. 2690, Parque Industrial Mexicali IV. Rama 1 Rd., Pathumwan Bangkok 10330, Thailand. I represent Pacific Fish Processing Company Limited based in Thailand with an export office in JAPAN and ITALY covering the Europe area. Our company was established in the year 1984 to produce frozen mincemeat known as Surimi for export. We produce freshest and finest fish from nearby sources to support its production process. In order to increase the variety of its products, the company invested in a new facility and the most advanced technology to produce some new products from Surimi. The new line of value added products includes Kamaboko, Imitation Crab Stick, Chikuwa, Fish Chips, Fish Cakes, Seafood Balls, Fish Balls, and other value added products. We export these products into the following countries Japan, Singapore, Malaysia, Taiwan, France, Spain, Netherlands, Russia, Australia and New Zealand. Due to increase demands of our products in America and Canada, we decided to move our products often into the continent of America. By so doing, we are looking for someone who can serve as an in-country representative who will be serving as a link between us and our customers within that province. It is upon this note that we are writing you this mail to seek your assistance in representing our company in your locality as our representative. Note that as a representative of our company; you will be entitled to a basic salary of 60,000USD a year. That is 5,000 dollars monthly and 8% of any amount you receive from customers on behalf of the company as payments for outstanding debts or goods that they want to buy. As a distributor of our company, your basic functions are as follows: Maintenance of a sales office. The company will be responsible for the cost. Assume responsibility for all sales office. Lastly, contacting clients on behalf of the company who are ready to make payments or wanting to pay for products they purchase from the company. To facilitate the conclusion of this transaction if accepted, do send us by email promptly the following: Your Full name and present occupation (if any), Telephone number and Fax. Contact address, Age, Marital status. Lastly, letting us know if you are free from crime, which includes financial crime. Send all Correspondence to our financial consultant: Richard_green_ambassador(a)yahoo.co.uk Thanks for your time Yours Sincerely, Faysal Ibrahim Accounts Coordinator Pacific Fish Processing Company Limited.

1 0

RE: Flow Control Query
by Griffith, William 27 Mar '06

27 Mar '06

We have seen this in the past with Cisco. Do not think that what you set the filer to is what is going to be negotiated. Check your switch to see what the setting is. I suspect that the switch is set to "None" If you change your switch the filer should change within 10 minutes. Let me know if you have additional questions. Thanks - William -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Philip Boyle Sent: Monday, March 27, 2006 9:57 AM To: toasters(a)mathworks.com Subject: Flow Control Query Hi guys, Have any of you had issues with the network interface on a filer not negociating to full flowcontrol? I'm seeing the issue using gigE dual port cards on the filer connecting back into a jet core foundry switch Gig Copper Module. Filer is running ONTAP 7.0.4. Interface is fine: e9: flags=848043<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether xxxxxxxxxxx (auto-1000t-fd-up) flowcontrol full trunked vifbxx Switch setup is fine: GigabitEthernetx/x is up, line protocol is up Hardware is GigabitEthernet, address is xxxxxxxxxx (bia xxxxxxxxxx) Configured speed auto, actual 1Gbit, configured duplex fdx, actual fdx Member of Lx VLAN ID xxx, port is untagged, port state is FORWARDING STP configured to ON, priority is level0, flow control enabled ifstat shows flowcontrol set to none :-( ifstat e9 LINK_INFO Current state: up | Up to downs: 9 | Auto: on Speed: 1000m | Duplex: full | Flowcontrol: none Potential hardware compatability issue.........? Note, mirrored setup using fibre cards/ports works fine. The fibre card is: 1000sx-fd gigE card is: 1000t-fd Thanks, Philip ------------------ Philip Boyle eircom net systems philip.boyle(a)eircom.net tel: +353 1 701 0921 mob: +353 85 1744 354

1 0

Re: Hi!!
by Elena 27 Mar '06

27 Mar '06

Hello!!! I am a 32 year old girl who loves life. I like to stay busy, always doing something. My favorite things ever incude the sun, the water and the beach, art and musi? I'm looking for someone who loves to have fun. Someone who can not only keep up with me, but who will challange me. If you want to correspond with me and to learn more about me that write to me on my e-mail. Ok??? My e-mail: elena3562(a)yandex.ru I shall wait for your letters. As soon as you will write to me that I shall send you my photos. Ok??? Your friend Eva.

1 0

INFORMATION
by wintergames＠virgilio.it 25 Mar '06

25 Mar '06

19th ARCTIC WINTER GAMES MARCH 5th - MARCH 11, 2006, DISBURSEMENT UNIT. IDENTIFICATION NUMBER: XWTR24351423 Dear Sir/Madam, Be informed that the arctic winter games has come and gone.As customary,gifts are disbursed to selected recipients/winners via an email pick software. Your email information falls within CATEGORY C for year 2006 end of games stakes and a lump sum attached.This was put in place to promote awareness on the games and encourage participants from all corners of the world. You are hereby required to reach our disbursement unit for further information,verification & release quoting your identification number: SHEIKH P.DAVIES, Foreign Unit Manager, of the (Hillstar Finance and Securities) Amsterdam,Netherlands. TEL:+31-623-009-849 FAX: +31-847-547-368 email:( hillstarfinance(a)netscape.net ) Faithfully, Sir.Carlos Langer Organising Committee.

1 0

COMPANY
by douglas Komo 25 Mar '06

25 Mar '06

I manage my Dad's company here in SOUTH AFRICA. PRAAD FABRICS AND TEXTILES INDUSTRIAL LTD, We supply Fabrics and Textiles. Actually i am in need of a trusthworthy and honest someone who can stand in your country as a rep to my little establishment as a representative in your country . We make alots of supplies to clients in the Europe/Asia/ and to some other part of the world,which i do come to the states to recieve payment after supply. I realize that its quite too expensive and stressful for me to be coming to the your Country to recieve such payment twice in a month Most of the payment we usually recieve it paid by cheque. This is the main and sincere reason why i should be in need of your assistance with trust and honesty from you. As the MD if this company i am willing to you 10% of every payment that comes in through you with honesty on my behalf. All you need to do is to recieve payment on my behalf and then cash it and you will remove 10% for yourself and then send the rest down to my company You dont have to go any lenght to pick the payment,cos i will instruct my client to make the payment out to you and it will be mailed out to you via mail . All you will need is to provide me with is your full name and address where the payment can be addressed to so that my client can issue u the payment as soon as possible PRAAD FABRICS AND TEXTILES INDUSTRIAL LTD I beleive that you must be a God fearing someone who cant ripp me off,cos i have that feelings we can meet ourselves when i come to the states someday Am faithfull and i can always be feeling as such to somebody else and meanwhile most americans that i know can be very trustworthy I will give you all my company's info which you will need to send the funds down to me this is my full company's info 32 oukland pack johannesburg, South Africa, PLEASE CONTACT ME VIA PHONE 27 73 188 0290 or fax 27 11 507 6192. Regard's NICK LELO

1 0

我要发布软件
by �� 24 Mar '06

24 Mar '06

ÕŸ³€£¬ÄúºÃ£¡°ï°ïÃŠÊÕÂŒÏÂÃæµÄ×îÐÂ°æ±ŸÈíŒþ[ÍêÈ«×ÔÖ÷¿ª·¢]£¬Ð»Ð»£¡ ¡ºÐÂºüµçÄÔŽ«Õæ¡»¡ª¡ŸÍš¹ý56KÆÕÍšMODEMÁªµç»°Ïß·¢ËÍºÍœÓÊÕŽ«Õæ£¬ÎÞÐèŽ«ÕæÖœºÍŽòÓ¡»ú£¬ËÙ¶È¿ì£¬Ê¡Ç®¡¿ ¡ºÐÂºüŽ«ÕæÈº·¢¡»¡ª¡Ÿ×Ô¶¯µŒÈëºÅÂëÏò³ÉÇ§ÉÏÍòµÄ¿Í»§Èº·¢Ž«Õæ£¬ÎÞÐèÈË¹€ÖµÊØ£¬ÄÚÈÝžüÇåÎú£¬Ê¡Ç®Ê¡ÁŠ¡¿ ¡ºÐÂºüŽ«ÕæËÑË÷¡»¡ª¡ŸµŒÈë¹ØŒüŽÊÈ«Ìì×Ô¶¯ËÑË÷ž÷³ÇÊÐ¡¢ÐÐÒµ¹«ËŸÆóÒµŽ«Õæ»úºÅÂëÐÎ³ÉÁÐ±í£¬ÓªÏúŒÛÖµžß¡¿ ¡ºËÑÒ×Ž«Õæ·þÎñÆ÷¡»¡ª¡ŸŸÖÓòÍøÉÏ°ÙÌšµçÄÔ¹²ÏíÒ»Ìõµç»°ÏßÊÕ·¢Ž«Õæ£¬œÚÊ¡¶à²¿ÃÅ°ì¹«Éè±ž¹ºÖÃ·ÑÓÃ£¬³¬Öµ¡¿ ¡ºÐÂºüµç»°¹ã²¥¡»¡ª¡ŸÍš¹ý56KÓïÒôModem×Ô¶¯²ŠŽò³ÉÇ§ÉÏÍòµÄµç»°ºÅÂë²¥·ÅÓïÒôÍšÖª£¬µç»°ŽßœÉ·ÑÓÃÌØÐ§¡¿ ¡º°Ù¶ÈµçÓÊËÑË÷¡»¡ª¡ŸµŒÈë¹ØŒüŽÊÁÐ±í×Ô¶¯ÔÚ°Ù¶ÈËÑË÷ÒýÇæ¶šÏòËÑË÷ž÷³ÇÊÐ¡¢ÐÐÒµ¹«ËŸÆóÒµµç×ÓÓÊŒþµØÖ·¡¿ ¡º¹·¹·µçÓÊËÑË÷Æ÷¡»¡ª¡ŸµŒÈë¹ØŒüŽÊÁÐ±í×Ô¶¯ÔÚGOOGLE.COMÉÏ¶šÏòËÑË÷ž÷³ÇÊÐ¡¢ÐÐÒµ¹«ËŸÆóÒµµç×ÓÓÊŒþµØÖ·¡¿ ¡ºËÑÒ×ÓÊŒþËÑË÷Íõ¡»¡ª¡ŸÉÏÍøÊ±²»Öª²»ŸõÔÚºóÌš×Ô¶¯ËÑË÷ÍøÒ³ÉÏµÄÓÊŒþµØÖ·£¬ÍøÉÏÑ°ÕÒÄ¿±ê¿Í»§²»ÔÙÊÇÄÑÊÂ¡¿ ¡ºÏÈºÓÓÊŒþ×·²¶ ¡»¡ª¡ŸÊäÈëÒ»žöÍøÖ·±ã¿Éœ«žÃÍøÕŸÏÂËùÓÐÒ³ÃæÉÏµÄÓÊŒþµØÖ·Ò»ÍøŽòŸ¡£¬¿É×ÔÉè¶šËÑË÷²ãÊý¡¿ ¡ºÂÛÌ³µçÓÊËÑË÷¡»¡ª¡Ÿ×šÒµËÑË÷ž÷ÀàÐèÒª×¢²áµÇÂœµÄÂÛÌ³¡¢¹©ÇóÐÅÏ¢¡¢»ÆÒ³¡¢»áÔ±ÕŸµãÉÏ¹«²ŒµÄÓÊŒþµØÖ·¡¿ ¡ºÍøŒÊµçÓÊ²¶×œÆ÷¡»¡ª¡ŸÓÃÊó±êžŽÖÆ·œÊœžšÖúÈË¹€ŽÓÍøÕŸÉÏ¿ìËÙÌáÈ¡Ä¿±ê¿Í»§µÄµç×ÓÐÅÏä£¬ÓÊÖ·°Ù·Ö°ÙŸ«È·¡¿ ¡ºµç×ÓÓÊŒþÉšÃèÆ÷¡»¡ª¡ŸËÑË÷ÈÎÒâÎÄŒþ¡¢Ä¿ÂŒ¡¢OUTLOOK/FOXMAIL ÓÊŒþŒÐ¡¢Ó²ÅÌ¡¢¹âµúÖÐÓÊÖ·²¢¿ÉÈ¥³ýÖØžŽ¡¿ ¡ºÒ×ÐÂÌõÂëŽòÓ¡¡»¡ª¡Ÿ¹úŒÊ±ê×ŒÌõÐÎÂëÉèŒÆ¡¢Éú³ÉºÍŽòÓ¡ÈíŒþ£¬³¬ÊÐÅäÌ×Éú²úÆóÒµÊÊÓÃ£¬¿ÉÌõÂë¹âÇ¹ÉšÃè¡¿ ¡ºËÑÒ×ÌõÂë×šŒÒ¡»¡ª¡Ÿ¹úŒÊ±ê×Œ39Êœ·ÀÎ±ÌõÐÎÂë×Ô¶¯Ëæ»úÉú³É¡¢·ÖÒ³ŽòÓ¡¡¢²éÑ¯£¬ÖÆÔìÒµ²úÆ··ÀÎ±×·ËÝÓÃ¡¿ ¡ºÍøÕŸÓªÏúÆï±ø¡»¡ª¡Ÿ¹úÄÚÎšÒ»Ö§³ÖÓÃ»§×ÔŒºœšÁ¢ÊýŸÝ¿âµÄÍøÕŸÐÅÏ¢Ä£ÄâÈË¹€×Ô¶¯·¢²ŒµÄÍšÓÃÐÍÓªÏúÈíŒþ¡¿ ¡ºÐÂºüÂÛÌ³¿ñÌù¡»¡ª¡Ÿ×Ô¶¯ÔÚÂÛÌ³µÄž÷žöÖ÷ÌâÇøÓòÕÅÌù¹ãžæÐÅÏ¢£¬ÕæÕýµÄÂÛÌ³·¢Ìû»úÆ÷ÈË£¬ÓªÏúÐ§¹û×îŒÑ¡¿ ¡ºËÑÒ×°ì¹«Œà¹ÜÍõ¡»¡ª¡Ÿ¶ÔŸÖÓòÍøµçÄÔÆÁÄ»ÊµÊ±ÅÄÕÕŒà¿Ø£¬¶ÅŸøÉÏ°àÍæÓÎÏ·¡¢ÁÄÌì¡¢¿ŽµçÓ°£¬Ìážß°ì¹«ŒšÐ§¡¿ ¡ºËÑÒ×IEŒà¹ÜŽóÊŠ¡»¡ª¡ŸÏÞÖÆIEä¯ÀÀÆ÷Ö»ÄÜŽò¿ªÖž¶šµÄºÏ·šÍøÕŸÁÐ±í£¬œûÖ¹¿Ž»ÆÉ«¡¢·Ç·š¡¢²¡¶ŸºÍÄŸÂíÕŸµã¡¿ ¡º¶«·œ×ÔÓÉÖ÷»ú¡»¡ª¡ŸÓÃÆÕÍšÁªÍøPC¿ìËÙœšÁ¢º£Á¿¿ÕŒäžöÈËÖ÷Ò³·þÎñÆ÷¹€Ÿß£¬ÏÂÔØÊýŸÝÈÝÁ¿œÏŽó³¡ºÏÊÊÓÃ¡¿ ¡ºÐÂºüQQÈº·¢Æ÷¡»¡ª¡ŸÏò³É°ÙÉÏÇ§µÄQQºÃÓÑ×Ô¶¯Èº·¢¹ãžæÐÅÏ¢£¬Ö§³ÖQQ×îÐÂ°æ±Ÿ£¬·¢ËÍËÙ¶È¿ì£¬Ð§¹ûŒ«ŒÑ¡¿ ¡º¿ªÔŽÖ€¿šŽòÓ¡¡»¡ª¡ŸŸ«È·Ç¶Ì×ŽòÓ¡ÐÅ·â¡¢Ö§Æ±¡¢·¢Æ±¡¢¹€×÷Ö€¡¢œáÒµÖ€µÈž÷ÀàÖ€¿š£¬ÆÕÍšŽòÓ¡»ú¿ÉÊ€ÈÎ¡¿ ¡ºÐÂºüŽúÀí·þÎñÆ÷¡»¡ª¡ŸÈÃŸÖÓòÍøÉÏ°ÙÌšµçÄÔHTTPŽúÀí·œÊœ¹²ÏíÉÏ»¥ÁªÍø£¬ÊÕ·¢ÓÊŒþ¡¢²¥·ÅµçÓ°ÒÔŒ°QQÁÄÌì¡¿ ÓŠÓÃÆœÌš£ºWin9x/Me/NT/2000/XP ŒŒÊõÖ§³Ö£º0519-8537189/8670323 QQºÅ×ÉÑ¯£º70094637 MSN£ºwww.8715.com(a)hotmail.com ÈíŒþÓïÑÔ£ºŒòÌåÖÐÎÄ [ÈíŒþ100£¥¿ÉÏÂÔØ£¬ÈçÄ³ÁŽœÓŽò²»¿ªÇë³¢ÊÔÆäÓàÁŽœÓ»òQQÀïË÷È¡ÍøÖ·] Ãâ·ÑÏÂÔØ£º http://xhsoft365.5888.com Ãâ·ÑÏÂÔØ£º http://xhsoft365.cnnb.net Ãâ·ÑÏÂÔØ£º http://xhsoft365.yeah.net Ãâ·ÑÏÂÔØ£º http://xhsoft365.9126.com ---------------------------------------------- »¶ÓÊ¹ÓÃ gz139.com.cn µç×ÓÓÊŒþÏµÍ³ http://mail.gz139.com.cn

1 0

SPIRITUALITE PRATIQUE.
by franck＠philimail.com 23 Mar '06

23 Mar '06

BONJOUR, PRENEZ CONSCIENCE ET UTULISEZ LES POUVOIRS DIVINS OCCULTES QUI SONT EN VOUS EN RECEVANT A DISTANCE : + UNE REVELATION DES POUVOIRS DIVINS OCCULTES QUI SONT EN VOUS ET COMMENT LES UTULISER DANS VOTRE VIE QUOTIDIENNE ? ET/OU + UNE REVELATION DES SECRETS BIBLIQUES ET LEURS APPLICATIONS PRATIQUES QUOTIDIENNES. DEMANDEZ UNE DOCUMENTATION GRATUITE A CONTRE DEUX COUPON-REPONSES INTERNATIONAUX A : KKA DOCUMENT 02 BP 633 ABIDJAN 02 COTE D'IVOIRE OU PAR MAIL A : spiritualite.pratique(a)laposte.net MERCI.

1 0

GRACE INTERNATIONAL IMPORT & EXPORT COMPANY
by g.graceinternationalho＠virgilio.it 23 Mar '06

23 Mar '06

Your Kind Attention: I am the PRESIDENT OF GRACE INTERNATIONAL, Import and Export Company based in the China. My company exports consumable proceesing raw materials and other goods/services for world trade. What we really require is someone who can represent this company in the US/CANADA and some parts of Europe. We have been having problems with clients in these regions because they are politely refusing to pay for shipments on one excuse or the other so we need a representative that can assist us in clearing our money in their respective countries. Be informed that as our representative, you will receive 10% of whatever amount you receive for the company and the balance will be paid into an account we will avail to you. The second thing required of you would be for you to establish a relationship on behalf of our company with other similar companies in your country so that we can have new ideas and directions. This job is rather easy and does not require a lot of expertise. If you are interested in this business offer, please email me at: shunlao(a)netscape.net Very Respectfully, Shun Lao. President GRACE INTERNATIONAL. Goods for Import / Export & Freight Fwdg. Svcs.

1 0

RE: List volumes in an aggregate
by Schmaus, Florian 23 Mar '06

23 Mar '06

I prefer "aggr status -i" Regards Florian > -----Original Message----- > From: owner-toasters(a)mathworks.com > [mailto:owner-toasters@mathworks.com] On Behalf Of Haber, David J. > Sent: Wednesday, March 22, 2006 2:33 PM > To: toasters(a)mathworks.com > Subject: List volumes in an aggregate > > Can someone please tell me how to display which volumes are contained > within an aggregate? Thanks. > > > Confidentiality Notice: > This message, and any attachments, may contain information > that is confidential, privileged, and/or protected from > disclosure under state and federal laws that deal with the > privacy and security of medical information. If you received > this message in error or through inappropriate means, please > reply to this message to notify the Sender that the message > was received by you in error, and then permanently delete > this message from all storage media, without forwarding or > retaining a copy. >

1 0

(no subject)
by livecamaccess＠gmail.com 23 Mar '06

23 Mar '06

Hello , Hey! I have been trying to get in touch with you. I finally got a cam so you can see me when we talk. http://ca.geocities.com/kellybeachbabew/cam.html ---------- This e-mail was sent through the "PCJ Programs" file database. The webmasters of the "PCJ Programs" file database take no responsibility for the e-mails sent through the database.

1 0

JOB OFFER (EARN 10%)
by Stanley Press Equipment Ltd 23 Mar '06

23 Mar '06

Mr R.G Stanley Stanley Press Equipment Ltd. Graphic House. Bank Street, Macclesfield, Cheshire, UK SK11 7BR, Phone (0044)7023050308 (0044)7024091695 Greetings From UK, I am Mr R.G Stanley,director general Stanley Press Equipment Ltd. Our company is involved in the Supplier of finishing, bindery and converting equipment, including Lawson cutters & drills, Gietz foil locking & embossing machines, Kugler pad making achines, Womaco wire inding systems, Albo stack turners, MZE sheet and handling systems, joggers,air tables, restackers and loading devices, Lombardi ram punches & die cutters. These products are supplied to the international market in North America/South America, Europe and Canada. We will be very glad if you can be our company representative/payment agent in your region and earn 10% of every payment made through you to us. For more information,contact me via email(stanley.sales(a)laposte.net) Our web site is http://www.s-p-e.co.uk Please if you are interested forward to us the following: 1.Full Names............................................ 2.Phone/Fax Number..................................... 3. Occupation............................................ 4.Your Full Contact Address............................ 5.Your Age................................................. 6. Country.................................................. Thanks as we look forward to working with you. Mr R G Stanley Director General Stanley Press Equipment Ltd. ___________________________________________________________________________

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters