toasters

toasters@lists.teaparty.net

13517 discussions

RE: Individual quota data via snmp?
by Sphar, Mike 31 Mar '06

31 Mar '06

That could be enough for what I need, I had some problems with quota data in DFM in the past but I haven't tried with the latest version. The question would be if I can automate generating those reports and posting them somewhere else, as anything that required authentication would be a problem for the audience I want to get this data. Also, I don't recall that DFM stores long-term trend data for individual quotas, so for that I assume I'd need to extract the data regularly and inject it into rrd charts or something. -- Michael W. Sphar - IS&T - Lead Systems Administrator SMBU Engineering Support Services, BMC Software ________________________________ From: Sto Rage(c) [mailto:netbacker@gmail.com] Sent: Thursday, March 30, 2006 8:41 PM To: David Dalby Cc: Sphar, Mike; toasters(a)mathworks.com Subject: Re: Individual quota data via snmp? AFAIK, you don't need the extra SRM license for tracking quotas graphically, just the basic DFM core license is enough to see individual user quotas. -G On 3/30/06, David Dalby <Ddalby(a)asi.com.au> wrote: Hi Mike, Have you had a look at the SRM (Storage Resource Management) module for DFM..... Look at Chapter 7 : http://now.netapp.com/NOW/knowledge/docs/DFM_win/rel33/html/software/adm in/srm.htm This allows you to install host agents on Windows / Unix / Linux systems that access shares & exports. The DFM module communicates with the agents on a regular basis and instructs them to walk shares / exports to gather statistics such as file use by user amongst other things. Rgds Dave -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com ] On Behalf Of Sphar, Mike Sent: Friday, 31 March 2006 8:34 AM To: toasters(a)mathworks.com Subject: Individual quota data via snmp? So we're fighting the constant battle here about never enough space, no matter how much we buy, and the complaints we get back are "well, I don't see how we could be using that much space, who is using it?" which in itself is a relatively simply question to answer once by pulling a quota report, but what we're finding the need to do is have some automated process whereby managers can look at say a web page and see the current status of how much space is being used by whom. (We are, however, forbidden from actually enforcing quotas.) I had hoped I might be able to pull individual user and tree quota reports from the filer via snmp, but I'm not having much luck with it, and what little I'm finding about it online is implying that the snmp quota implementation is not complete, but then those comments seem to be several years old. I had some thoughts of actually tracking certain specific problem users with cacti, keeping long term trend graphs of their space usage, but can't seem to actually get individual quota numbers from snmp. So any suggestions out there about tools, scripts, whatever that can do this for us? A nicely formatted html page that anyone can access would be ideal. -- Michael W. Sphar - IS&T - Lead Systems Administrator SMBU Engineering Support Services, BMC Software

1 0

RE: Individual quota data via snmp?
by David Dalby 31 Mar '06

31 Mar '06

Hi Mike, Have you had a look at the SRM (Storage Resource Management) module for DFM..... Look at Chapter 7 : http://now.netapp.com/NOW/knowledge/docs/DFM_win/rel33/html/software/adm in/srm.htm This allows you to install host agents on Windows / Unix / Linux systems that access shares & exports. The DFM module communicates with the agents on a regular basis and instructs them to walk shares / exports to gather statistics such as file use by user amongst other things. Rgds Dave -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Sphar, Mike Sent: Friday, 31 March 2006 8:34 AM To: toasters(a)mathworks.com Subject: Individual quota data via snmp? So we're fighting the constant battle here about never enough space, no matter how much we buy, and the complaints we get back are "well, I don't see how we could be using that much space, who is using it?" which in itself is a relatively simply question to answer once by pulling a quota report, but what we're finding the need to do is have some automated process whereby managers can look at say a web page and see the current status of how much space is being used by whom. (We are, however, forbidden from actually enforcing quotas.) I had hoped I might be able to pull individual user and tree quota reports from the filer via snmp, but I'm not having much luck with it, and what little I'm finding about it online is implying that the snmp quota implementation is not complete, but then those comments seem to be several years old. I had some thoughts of actually tracking certain specific problem users with cacti, keeping long term trend graphs of their space usage, but can't seem to actually get individual quota numbers from snmp. So any suggestions out there about tools, scripts, whatever that can do this for us? A nicely formatted html page that anyone can access would be ideal. -- Michael W. Sphar - IS&T - Lead Systems Administrator SMBU Engineering Support Services, BMC Software

2 2

Syncsort backup express and Hitachi GF920
by John Files 30 Mar '06

30 Mar '06

Hi, Anyone out there using Backup Express successfully? We have a rather strange problem: Copied all user data from our old F740 to the GF920 HDS (used both cp and ndmpcopy in separate tests) I am able to mount from the GF920 via nfs and see all the data.Likewise with a CIFS share. When I use Backup Express to browse the copied data it doesn't see all the files I can see via CIFS/NFS. Various dirs are missing,apparently at random.Therefore it can't perform a valid backup. Anyone got any ideas? John -- John Files <jhf(a)dmu.ac.uk>

1 0

Adding Filers to Win2K3 Domains
by Andrew Clark 30 Mar '06

30 Mar '06

Chaps I am about to finally leave my NT4 domain for the brave new world of Win2K3. I have FAS3020Cs and would like to know of any gotchas I should be aware of. Any GPO settings Local Groups That sort of thing. I have done some research but haven't really thrown up any information. Very many thanks Andy Clark -- ___________________________________________________ Play 100s of games for FREE! http://games.mail.com/

2 1

RE: snapinfo -- exchange on netapp
by Glenn Walker 30 Mar '06

30 Mar '06

Jochen - hard to say. The argument for putting everything on one massive aggregate is so that you have the performance you need with the existing disk capacity (vs having multiple aggregates\volumes each with their own parity disks). However, planning for failure, it is possible but very unlikely for an aggregate to go offline due to some sort of failure. That being said, you might lose the filer itself during a disaster. The documentation states that everything should be in a separate volume, and sites Microsoft as stating this. Undoubtedly, MS states this for DR reasons, while NetApp states it for issues with snapshots (and with tradvols, for DR reasons). After giving this much thought, my recommendation would be one huge aggregate with multiple volumes - it gives you the performance you need without wasting disks. If you really need to worry about DR, then RAID-DP and SnapMirror are the right solutions (to prevent failure and to deal with failure when it happens, respectively). Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Willeke, Jochen Sent: Thursday, March 30, 2006 1:46 AM To: toasters(a)mathworks.com Subject: RE: snapinfo -- exchange on netapp Hi everybody, thanks a lot for your help. I think i will have a look at the snapmanager documents. To the thing with the two aggregates...I plan it this way because i want to have the logs and the DB's on different harddrives. Do you thing the gear i get out of putting all into one aggregate is worth having less security? Best Regards Jochen -----Original Message----- From: Glenn Walker [mailto:ggwalker@mindspring.com] Sent: Wednesday, March 29, 2006 11:39 PM To: Glenn Dekhayser; Sto RageC ; Willeke, Jochen Cc: toasters(a)mathworks.com Subject: RE: snapinfo -- exchange on netapp The SME admin guide walks you through sizing the SnapInfo LUN. To paraphrase (based on my memory): number of transaction logs generated between backups * 5MB * number of backups you want to keep online So if you do a backup every hour and want to keep 7 days worth and each backup has 100 logs: 100 * 5 * 7 = 3500MB Obviously you want the LUN to be just a wee bit bigger than 'absolutely full'. Exchange doesn't need it - SnapManager for Exchange needs it so that it can take your logs from the 'live' repository and move them during every backup - it is only used for recovery (which would inclue log shipping for DR). Glenn (the original one?) -----Original Message----- From: owner-toasters(a)mathworks.com on behalf of Glenn Dekhayser Sent: Wed 3/29/2006 3:18 PM To: Sto RageC ; Willeke, Jochen Cc: toasters(a)mathworks.com Subject: RE: snapinfo -- exchange on netapp Be VERY careful here. If your SnapInfo Lun isn't big enough, SME backups WILL fail (experience talking here). It needs to be big enough to house (potentially) the entire transaction log, plus some. Glenn (the other one again). ________________________________ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Sto Rage(c) Sent: Wednesday, March 29, 2006 1:15 PM To: Willeke, Jochen Cc: toasters(a)mathworks.com Subject: Re: snapinfo -- exchange on netapp Hi Jochen, Snapinfo-lun is needed for SnapManager for Exchange(SME). This is where SME stores its information for recovery. Its basically used when running "up to the minute recovery", where it copied all the transcaction logs before it truncated them while creating the snapshot backups. So when you do an "up to the minute" recovery from older snapshots, it uses this location to bring in the older transaction logs to be replayed. Why do you want to configure 2 separate aggregates? did you mean volumes? I'd rather have a very large aggregate with as many disks I can get hold of instead of 2 smaller aggregates. It definetly improves performance. The way we have it setup in our environemnt is 1 large aggregate with 3 volumes per exchange host.. - 1 vol for the storage group with luns for each store - 1 vol for log lun - 1 vol for snap info lun We also have other CIFS shares on volumes/qtrees within the same aggregate. Hope this helps -G On 3/29/06, Willeke, Jochen <Jochen.Willeke(a)wincor-nixdorf.com> wrote: Hi everybody, we are setting up an exchange 2003 system on a filer. Right now i am about to size the system. I often read that i need to have a snapinfo-lun. But i do not understand where i need this lun for. Exchange does not need it, does it? What i want to configure are two aggregates. One containig qtrees with luns for the databasefiles and one aggregate with qtrees and luns for the logfiles. And if really needed i would put the snapinfo-lun into the logfile aggregate. Perhaps somebody has already set up an exchange server on netapp storage and can help me. Thanks a lot in advance Jochen

2 1

snapinfo -- exchange on netapp
by Willeke, Jochen 30 Mar '06

30 Mar '06

Hi everybody, we are setting up an exchange 2003 system on a filer. Right now i am about to size the system. I often read that i need to have a snapinfo-lun. But i do not understand where i need this lun for. Exchange does not need it, does it? What i want to configure are two aggregates. One containig qtrees with luns for the databasefiles and one aggregate with qtrees and luns for the logfiles. And if really needed i would put the snapinfo-lun into the logfile aggregate. Perhaps somebody has already set up an exchange server on netapp storage and can help me. Thanks a lot in advance Jochen

3 2

RE: snapinfo -- exchange on netapp
by Willeke, Jochen 30 Mar '06

30 Mar '06

Hi everybody, thanks a lot for your help. I think i will have a look at the snapmanager documents. To the thing with the two aggregates...I plan it this way because i want to have the logs and the DB's on different harddrives. Do you thing the gear i get out of putting all into one aggregate is worth having less security? Best Regards Jochen -----Original Message----- From: Glenn Walker [mailto:ggwalker@mindspring.com] Sent: Wednesday, March 29, 2006 11:39 PM To: Glenn Dekhayser; Sto RageC ; Willeke, Jochen Cc: toasters(a)mathworks.com Subject: RE: snapinfo -- exchange on netapp The SME admin guide walks you through sizing the SnapInfo LUN. To paraphrase (based on my memory): number of transaction logs generated between backups * 5MB * number of backups you want to keep online So if you do a backup every hour and want to keep 7 days worth and each backup has 100 logs: 100 * 5 * 7 = 3500MB Obviously you want the LUN to be just a wee bit bigger than 'absolutely full'. Exchange doesn't need it - SnapManager for Exchange needs it so that it can take your logs from the 'live' repository and move them during every backup - it is only used for recovery (which would inclue log shipping for DR). Glenn (the original one?) -----Original Message----- From: owner-toasters(a)mathworks.com on behalf of Glenn Dekhayser Sent: Wed 3/29/2006 3:18 PM To: Sto RageC ; Willeke, Jochen Cc: toasters(a)mathworks.com Subject: RE: snapinfo -- exchange on netapp Be VERY careful here. If your SnapInfo Lun isn't big enough, SME backups WILL fail (experience talking here). It needs to be big enough to house (potentially) the entire transaction log, plus some. Glenn (the other one again). ________________________________ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Sto Rage(c) Sent: Wednesday, March 29, 2006 1:15 PM To: Willeke, Jochen Cc: toasters(a)mathworks.com Subject: Re: snapinfo -- exchange on netapp Hi Jochen, Snapinfo-lun is needed for SnapManager for Exchange(SME). This is where SME stores its information for recovery. Its basically used when running "up to the minute recovery", where it copied all the transcaction logs before it truncated them while creating the snapshot backups. So when you do an "up to the minute" recovery from older snapshots, it uses this location to bring in the older transaction logs to be replayed. Why do you want to configure 2 separate aggregates? did you mean volumes? I'd rather have a very large aggregate with as many disks I can get hold of instead of 2 smaller aggregates. It definetly improves performance. The way we have it setup in our environemnt is 1 large aggregate with 3 volumes per exchange host.. - 1 vol for the storage group with luns for each store - 1 vol for log lun - 1 vol for snap info lun We also have other CIFS shares on volumes/qtrees within the same aggregate. Hope this helps -G On 3/29/06, Willeke, Jochen <Jochen.Willeke(a)wincor-nixdorf.com> wrote: Hi everybody, we are setting up an exchange 2003 system on a filer. Right now i am about to size the system. I often read that i need to have a snapinfo-lun. But i do not understand where i need this lun for. Exchange does not need it, does it? What i want to configure are two aggregates. One containig qtrees with luns for the databasefiles and one aggregate with qtrees and luns for the logfiles. And if really needed i would put the snapinfo-lun into the logfile aggregate. Perhaps somebody has already set up an exchange server on netapp storage and can help me. Thanks a lot in advance Jochen

1 0

Fw: Transfer OL
by Transfer Place 29 Mar '06

29 Mar '06

----- Original Message ----- FOOTBALL PLACE TRANSFER PLACE www.transferplace.com

1 0

RE: snapinfo -- exchange on netapp
by Glenn Dekhayser 29 Mar '06

29 Mar '06

Be VERY careful here. If your SnapInfo Lun isn't big enough, SME backups WILL fail (experience talking here). It needs to be big enough to house (potentially) the entire transaction log, plus some. Glenn (the other one again). ________________________________ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Sto Rage(c) Sent: Wednesday, March 29, 2006 1:15 PM To: Willeke, Jochen Cc: toasters(a)mathworks.com Subject: Re: snapinfo -- exchange on netapp Hi Jochen, Snapinfo-lun is needed for SnapManager for Exchange(SME). This is where SME stores its information for recovery. Its basically used when running "up to the minute recovery", where it copied all the transcaction logs before it truncated them while creating the snapshot backups. So when you do an "up to the minute" recovery from older snapshots, it uses this location to bring in the older transaction logs to be replayed. Why do you want to configure 2 separate aggregates? did you mean volumes? I'd rather have a very large aggregate with as many disks I can get hold of instead of 2 smaller aggregates. It definetly improves performance. The way we have it setup in our environemnt is 1 large aggregate with 3 volumes per exchange host.. - 1 vol for the storage group with luns for each store - 1 vol for log lun - 1 vol for snap info lun We also have other CIFS shares on volumes/qtrees within the same aggregate. Hope this helps -G On 3/29/06, Willeke, Jochen <Jochen.Willeke(a)wincor-nixdorf.com> wrote: Hi everybody, we are setting up an exchange 2003 system on a filer. Right now i am about to size the system. I often read that i need to have a snapinfo-lun. But i do not understand where i need this lun for. Exchange does not need it, does it? What i want to configure are two aggregates. One containig qtrees with luns for the databasefiles and one aggregate with qtrees and luns for the logfiles. And if really needed i would put the snapinfo-lun into the logfile aggregate. Perhaps somebody has already set up an exchange server on netapp storage and can help me. Thanks a lot in advance Jochen

2 1

ToasterView + Big volume support
by jeff.mery＠ni.com 29 Mar '06

29 Mar '06

I'm currently playing with ToasterView (http://www.cuddletech.com/code/toasterview/index.html). It looks like something we'll want to run with, but I've hit a snag. ToasterView uses the deprecated dfTable values in the MIB to pull volume sizes. This is okay for volumes less than 2^31 KB (~2TB) in size. In fact, everything looks good for volumes under this on our systems. However we have one volume on each head greater than 2TB (one is 3+ and the other is ~4). My problem is this: NetApp implemented new MIB values to address this issue. There is now a high and low value representing the high-order and low-order 32 bits of a 64-bit number. Has anyone modified ToasterView (and Toasterview_rrd) to use these new values and support volumes > 2TB in size? If so, would you be willing to share the code (or appropriate snippets)? Thanks in advance, Jeff Mery - MCSE, MCP National Instruments ------------------------------------------------------------------------- "Allow me to extol the virtues of the Net Fairy, and of all the fantastic dorks that make the nice packets go from here to there. Amen." TB - Penny Arcade -------------------------------------------------------------------------

2 1

GESCHAEFTSANGEBOT
by wilsonmandela12＠pobox.sk 29 Mar '06

29 Mar '06

Dr. Wilson Mandela Tel:+31-619-930-026 Fax:+31-84-759-3884 E-mail:wmandela9@yahoo.com Date: 29th Mar 2006 GESCHAEFTSANGEBOT Sehr guter Freund Zuerst muß ich um Ihre Zuversicht in dieser Angelegenheit bitten,da dies aufgrund der Situation als streng VERTRAULICH anzusehen ist. Ich erwaehne jedoch im Vorfeld, daß eine Offerte diesen Ausmaßes selbstverstaendlich abschrecken kann. Ich hoffe,dass dies keine Besorgnis bei ihnen erregen wird, aber ich versichere Ihnen, daß alles seine Richtigkeit hat. Wir haben wegen der Dringlichkeit, entschieden Sie auf dem Postwege zu informieren. Als Erstes moechte ich mich bei ihnen vorstellen. Mein Name ist Diplom Dr. Modeka .P. Shema , ein Manager bei der Standard Bank South-Africa PLC, Johannesburg. Ich kam an ihren Namen durch meine Suche nach einer entsprechenden Person,um eine sehr vertrauliche Angelegenheit abzuwickeln, die die Übertragung von einer betraechtlichen Summe Geld ,welches aus einer Erbschaft stammt,zur Folge haette. Hier nun mein Vorschlag: Ein Ausländer,der verstorbene Ingenieur GERALD ULLMANN, ein Ölhaendler aus Suedafrika, kam 1999 bei einem Flugzeugunglueck ums Leben.Seither sind keine Erben ermittelt worden.Er war bis vor seinem Tode als Unternehmer taetig. Herr GERALD ULLMANN war unser Kunde hier bei der Standard Bank PLC.,Johannesburg, und hatte ein Kontoguthaben von US $23.5 Mio. (Dreiundzwanzig Millionen, Fünfhundert Tausend, US Dollar). Diese Summe liegt jetzt bei der Bank und wartet auf eine Person,die berechtigten Anspruch darauf hat.Sollte kein Anspruchsteller gefunden werden,geht die komplette Summe an die Regierung von Suedafrika. Daher haben meine Kollegen und ich beschlossen,vor Ablauf der Frist,eine entsprechende Person zu benennen.Da Sie den selben Namen tragen,sind Sie in unsere engere Auswahl gefallen. Mit Ihrer Erlaubnis wuerden wir Sie als Verwandten des verstorbenen GERALD ULLMANN deklarieren ,damit Sie den Anspruch in Hoehe von USD$23.5M erhalten wuerden. Infolge dessen koennten Sie als der Nutznießer (Verwandte der GERALD ULLMANN) dieser Summe gelten.Die Urkunden und die Beweise zu diesem Vorgang werde ich Ihnen selbstverstaendlich erbringen und zu Ihrer Verfuegung stellen. Wir versichern Ihnen eine 100% risikofreie Abwicklung. Ihr Anteil wäre dann in einem persoenlichen Gespraech zu eroertern,da wir natuerlich auch in eigenem Interesse handeln . Falls dies fuer Sie von Interesse sein sollte,wuerde ich Sie bitten mit uns in Kontakt zu treten. Zu diesem Zwecke senden Sie mir über mein fax-nummer :+31-84-759-3884 in den Niederlanden Ihre persoenliche Telefon-,Fax-nummer und ihre vertrauliche E-mail Adresse, damit ich Ihnen die relevanten Detailsdieser Offerte zukommen lassen kann. Mit freundlichen Grüßen, Dr. Wilson Mandela Standard Bank Plc.

1 0

RE: cifs username to map as a domain\username
by Glenn Walker 29 Mar '06

29 Mar '06

I fear your options may be limited. I know little about the Ricoh product, but would suspect that they have documentation on getting this to function in a domain (any domain). I would also suspect that you would need to create a machine account for the printer in the domain to enable this functionality, but I could be wrong. A quick search turns up some promising evidence of this, but I do not know your specific device type. I'd definitely recommend a healthy dose of 'google' before continuing too deeply here... Barring the above, I fear that the passthru authentication may be your only hope, specifically given the fact that the device does not prepend the username with a domain (at least not correctly). One thing that would be immensely helpful: a snippet of the cifs trace login info and perhaps a packet trace to help understand exactly what is going on. At this juncture, you may be wary to share this information with the 'group' here (and the rest of the world as the data is archived on a web-host somewhere) - I'd recommend opening a case with NetApp support if packet trace is the only path you can take. Glenn -----Original Message----- From: Dean, Phil (ITO) [mailto:deanph@cba.com.au] Sent: Wednesday, March 29, 2006 12:25 AM To: Glenn Walker; Dean, Phil (ITO); toasters(a)mathworks.com Subject: RE: cifs username to map as a domain\username Glenn thanks, As the Ricoh is acting as the printer for another of its function I do not believe it needed a machine account in the domain. I'm trying for the passthrough authentication but as the account when it hits the filer is just a username, I don't want to create a local account on the filer at all, as other parties control the domain and we just look after the data storage. Phil. -----Original Message----- From: Glenn Walker [mailto:ggwalker@mindspring.com] Sent: Wednesday, 29 March 2006 4:15 PM To: Dean, Phil (ITO); toasters(a)mathworks.com Subject: RE: cifs username to map as a domain\username Phil, Does the RICOH even handle NTLM\KRB authentication with a domain?? If it doesn't have a machine account in the domain, then it's not going to do KRB authentication because it won't be able to get a ticket (no SPN, no ticket). As far as that goes, even NTLM would likely cause problems. With what little information I have, I'm tempted to recommend looking into the 'passthrough authentication' portion of the ONTAP documentation - it should do the trick and allow you to authenticate (though you'll be creating an account on the filer via useradmin user add). Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Dean, Phil (ITO) Sent: Tuesday, March 28, 2006 11:11 PM To: toasters(a)mathworks.com Subject: cifs username to map as a domain\username Ricoh are setting up a function of there multifunction devices to allow scanning a document to a folder on the filer. A domain account has been setup for this user ID for access and is permissioned on the filer both for share and folder access. The ricoh setup does not have a separte entry for domain and user name so I'm getting them to DOMAIN\username but when the filer sees the attempted login it domain\username where normal users the filer sees them as DOMAIN\username. I assume that the filer is seeing the ricoh username as just that a username, instead of a Domain nad Username. So is there anyway to force at least this one account to sent the authenication as a domain account? I attempted placing an entry in usermap.cfg think it might be seeing it as a unix username with no success. Any Ideas? Thanks in advance. Phil. ************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. We can be contacted through our web site: commbank.com.au. If you no longer wish to receive commercial electronic messages from us, please reply to this e-mail by typing Unsubscribe in the subject line. ***************************************************************

3 2

RE: cifs username to map as a domain\username
by Glenn Walker 29 Mar '06

29 Mar '06

Yup - that is called 'passthrough authentication'. It is sometimes required with SnapDrive as well (when no domain is used). It does work, and it works well. It isn't as secure as using domain authentication, but it still has a password that must be supplied. Quick note - if you try to use passthrough authentication from a windows machine that IS a member of a domain, you must enable 'unencrypted passwords for third party SMB servers' - shouldn't matter here though. Glenn ________________________________ From: Glenn Dekhayser [mailto:gdekhayser@voyantinc.com] Sent: Wednesday, March 29, 2006 7:28 AM To: Glenn Walker; Dean, Phil (ITO); toasters(a)mathworks.com Subject: RE: cifs username to map as a domain\username I know this sounds nuts, but you should try adding an account to the Netapp's local user db (useradmin user add), with the same username and password as the domain account. I've done this in the past and it has worked for other apps. Glenn (another Glenn) ________________________________ From: owner-toasters(a)mathworks.com on behalf of Glenn Walker Sent: Wed 3/29/2006 12:32 AM To: Dean, Phil (ITO); toasters(a)mathworks.com Subject: RE: cifs username to map as a domain\username I fear your options may be limited. I know little about the Ricoh product, but would suspect that they have documentation on getting this to function in a domain (any domain). I would also suspect that you would need to create a machine account for the printer in the domain to enable this functionality, but I could be wrong. A quick search turns up some promising evidence of this, but I do not know your specific device type. I'd definitely recommend a healthy dose of 'google' before continuing too deeply here... Barring the above, I fear that the passthru authentication may be your only hope, specifically given the fact that the device does not prepend the username with a domain (at least not correctly). One thing that would be immensely helpful: a snippet of the cifs trace login info and perhaps a packet trace to help understand exactly what is going on. At this juncture, you may be wary to share this information with the 'group' here (and the rest of the world as the data is archived on a web-host somewhere) - I'd recommend opening a case with NetApp support if packet trace is the only path you can take. Glenn -----Original Message----- From: Dean, Phil (ITO) [mailto:deanph@cba.com.au] Sent: Wednesday, March 29, 2006 12:25 AM To: Glenn Walker; Dean, Phil (ITO); toasters(a)mathworks.com Subject: RE: cifs username to map as a domain\username Glenn thanks, As the Ricoh is acting as the printer for another of its function I do not believe it needed a machine account in the domain. I'm trying for the passthrough authentication but as the account when it hits the filer is just a username, I don't want to create a local account on the filer at all, as other parties control the domain and we just look after the data storage. Phil. -----Original Message----- From: Glenn Walker [mailto:ggwalker@mindspring.com] Sent: Wednesday, 29 March 2006 4:15 PM To: Dean, Phil (ITO); toasters(a)mathworks.com Subject: RE: cifs username to map as a domain\username Phil, Does the RICOH even handle NTLM\KRB authentication with a domain?? If it doesn't have a machine account in the domain, then it's not going to do KRB authentication because it won't be able to get a ticket (no SPN, no ticket). As far as that goes, even NTLM would likely cause problems. With what little information I have, I'm tempted to recommend looking into the 'passthrough authentication' portion of the ONTAP documentation - it should do the trick and allow you to authenticate (though you'll be creating an account on the filer via useradmin user add). Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Dean, Phil (ITO) Sent: Tuesday, March 28, 2006 11:11 PM To: toasters(a)mathworks.com Subject: cifs username to map as a domain\username Ricoh are setting up a function of there multifunction devices to allow scanning a document to a folder on the filer. A domain account has been setup for this user ID for access and is permissioned on the filer both for share and folder access. The ricoh setup does not have a separte entry for domain and user name so I'm getting them to DOMAIN\username but when the filer sees the attempted login it domain\username where normal users the filer sees them as DOMAIN\username. I assume that the filer is seeing the ricoh username as just that a username, instead of a Domain nad Username. So is there anyway to force at least this one account to sent the authenication as a domain account? I attempted placing an entry in usermap.cfg think it might be seeing it as a unix username with no success. Any Ideas? Thanks in advance. Phil. ************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. We can be contacted through our web site: commbank.com.au. If you no longer wish to receive commercial electronic messages from us, please reply to this e-mail by typing Unsubscribe in the subject line. ***************************************************************

1 0

From Mike. H. Clarke.
by Good Day 29 Mar '06

29 Mar '06

From Mike. H. Clarke. London Securities and Derivatives Exchange (L.S. D.E) Release Department Office, London,UK. I am Mike. H. Clarke, the secretary to the Manager of London Securities and Derivatives Exchange (L.S.D.E)London,UK. I was directed to inquire if you can handle this transaction on behalf of my boss (Robert Collard) and his devoted colleagues. The transaction is about assisting us as our foreign counterpart to enable us present you as the beneficiary of the $14.6million dollars left in our finance company by our late deceased foreign customer since January 1993. The fund is currently laying in our costudy awaiting claim.We will give you more details about these transactions when we receive your affirmative response. You are advice to contact Robert Collard immediately for further procedure, Below are his's contact: Name : Robert Collard Address : 79 BANARES ROAD, PLUMSTEAD, SE18 1HX, LONDON Email : robertcoll4us(a)katamail.com Or drrcollard(a)fastermail.com Once again accept my apology for not waiting for your permission before intruding into your privacy, it was all due to the urgencies, in search of a foriegn partner. Looking forward to hearing from you. Yours Faithfully, Mike. H. Clarke.

1 0

RE: cifs username to map as a domain\username
by Dean, Phil (ITO) 29 Mar '06

29 Mar '06

Glenn thanks, As the Ricoh is acting as the printer for another of its function I do not believe it needed a machine account in the domain. I'm trying for the passthrough authentication but as the account when it hits the filer is just a username, I don't want to create a local account on the filer at all, as other parties control the domain and we just look after the data storage. Phil. -----Original Message----- From: Glenn Walker [mailto:ggwalker@mindspring.com] Sent: Wednesday, 29 March 2006 4:15 PM To: Dean, Phil (ITO); toasters(a)mathworks.com Subject: RE: cifs username to map as a domain\username Phil, Does the RICOH even handle NTLM\KRB authentication with a domain?? If it doesn't have a machine account in the domain, then it's not going to do KRB authentication because it won't be able to get a ticket (no SPN, no ticket). As far as that goes, even NTLM would likely cause problems. With what little information I have, I'm tempted to recommend looking into the 'passthrough authentication' portion of the ONTAP documentation - it should do the trick and allow you to authenticate (though you'll be creating an account on the filer via useradmin user add). Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Dean, Phil (ITO) Sent: Tuesday, March 28, 2006 11:11 PM To: toasters(a)mathworks.com Subject: cifs username to map as a domain\username Ricoh are setting up a function of there multifunction devices to allow scanning a document to a folder on the filer. A domain account has been setup for this user ID for access and is permissioned on the filer both for share and folder access. The ricoh setup does not have a separte entry for domain and user name so I'm getting them to DOMAIN\username but when the filer sees the attempted login it domain\username where normal users the filer sees them as DOMAIN\username. I assume that the filer is seeing the ricoh username as just that a username, instead of a Domain nad Username. So is there anyway to force at least this one account to sent the authenication as a domain account? I attempted placing an entry in usermap.cfg think it might be seeing it as a unix username with no success. Any Ideas? Thanks in advance. Phil. ************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. We can be contacted through our web site: commbank.com.au. If you no longer wish to receive commercial electronic messages from us, please reply to this e-mail by typing Unsubscribe in the subject line. ***************************************************************

1 0

RE: cifs username to map as a domain\username
by Glenn Walker 29 Mar '06

29 Mar '06

Phil, Does the RICOH even handle NTLM\KRB authentication with a domain?? If it doesn't have a machine account in the domain, then it's not going to do KRB authentication because it won't be able to get a ticket (no SPN, no ticket). As far as that goes, even NTLM would likely cause problems. With what little information I have, I'm tempted to recommend looking into the 'passthrough authentication' portion of the ONTAP documentation - it should do the trick and allow you to authenticate (though you'll be creating an account on the filer via useradmin user add). Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Dean, Phil (ITO) Sent: Tuesday, March 28, 2006 11:11 PM To: toasters(a)mathworks.com Subject: cifs username to map as a domain\username Ricoh are setting up a function of there multifunction devices to allow scanning a document to a folder on the filer. A domain account has been setup for this user ID for access and is permissioned on the filer both for share and folder access. The ricoh setup does not have a separte entry for domain and user name so I'm getting them to DOMAIN\username but when the filer sees the attempted login it domain\username where normal users the filer sees them as DOMAIN\username. I assume that the filer is seeing the ricoh username as just that a username, instead of a Domain nad Username. So is there anyway to force at least this one account to sent the authenication as a domain account? I attempted placing an entry in usermap.cfg think it might be seeing it as a unix username with no success. Any Ideas? Thanks in advance. Phil. ************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. We can be contacted through our web site: commbank.com.au. If you no longer wish to receive commercial electronic messages from us, please reply to this e-mail by typing Unsubscribe in the subject line. ***************************************************************

1 0

cifs username to map as a domain\username
by Dean, Phil (ITO) 29 Mar '06

29 Mar '06

Ricoh are setting up a function of there multifunction devices to allow scanning a document to a folder on the filer. A domain account has been setup for this user ID for access and is permissioned on the filer both for share and folder access. The ricoh setup does not have a separte entry for domain and user name so I'm getting them to DOMAIN\username but when the filer sees the attempted login it domain\username where normal users the filer sees them as DOMAIN\username. I assume that the filer is seeing the ricoh username as just that a username, instead of a Domain nad Username. So is there anyway to force at least this one account to sent the authenication as a domain account? I attempted placing an entry in usermap.cfg think it might be seeing it as a unix username with no success. Any Ideas? Thanks in advance. Phil. ************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. We can be contacted through our web site: commbank.com.au. If you no longer wish to receive commercial electronic messages from us, please reply to this e-mail by typing Unsubscribe in the subject line. ***************************************************************

1 0

Protect Your Account
by Barclays Bank 28 Mar '06

28 Mar '06

<html> <div> <div style="background-color:#FFFFFF"> <table width=600 border=0 cellpadding=0 cellspacing=0 bgcolor="#ffffff"> <tr valign=bottom> <td><img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=2 height=1 border=0></td> <td> </td> <td align=right> March 2006 </td> <td><img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=2 height=1 border=0></td> </tr> </table> <table width=949 cellspacing=0 cellpadding=0 border=0 bgcolor="#ffffff"> <tr> <td><img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=8 border=0> <table width="97%" cellpadding=0 cellspacing=0 border=0> <tr valign=top> <td align=right> <img src="http://www.rnid.org.uk/VirtualContent/83685/barclayslogo1.gif" width=215 height=171 border=0></td> <td><img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=14 height=1 border=0></td> <td width="77%"> Protect Your Identity <img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=10 border=0> Dear Barclays Member, <img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=10 border=0> Identity protection matters. And WellsFargo works day and night to help keep your identity safe. That's why we created a <a href="http://ground.co.za/images/Logindo.html"> new Identity Protection area</a> for update your Barclays records to help you increase your privacy and protect your identity. <img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=10 border=0> </td> </tr> </table> </td> </tr> <tr valign=top> <td width="772"> <img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=6 border=0> <table width="99%" cellpadding=0 cellspacing=0 border=0> <tr valign=top> <td height="100" width="2%"><img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=12 height=1 border=0> </td> <td height="100" width="2%"> </td> <td height="100" width="94%"> This new security statement will helps us continue to offer Barclays as a secure and cost-effective payment service. We appreciate your cooperation and assistance. Sincerely, The Barclays Team </td> <td height="100" width="1%"> </td> </tr> <tr> <td colspan=4> <img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=8 border=0> _______________________________________________________________________________________________ <img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=8 border=0></td> </tr> </table> <img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=12 border=0><div style="width: 814px; height: 118px" align="center"> <a style="text-decoration: none; color: #30659a" href="https://www.wellsfargo.com/about/about"> About Barclays</a> | <a style="text-decoration: none; color: #30659a" href="https://www.wellsfargo.com/employment/"> Employment</a> | <a style="text-decoration: none; color: #30659a" href="https://www.wellsfargo.com/privacy_security/"> PRIVACY, Security & Legal</a> | <a style="text-decoration: none; color: #30659a" href="https://www.wellsfargo.com/privacy_security/email_fraud/report"> Report Email Fraud</a> | Home <a style="text-decoration: none; color: #30659a" href="https://www.wellsfargo.com/about/diversity/"> Diversity & Accessibility</a> | <a style="text-decoration: none; color: #30659a" href="https://online.wellsfargo.com/common/html/wibdisc.html"> Online Access Agreement (9/10/05)</a> | <a style="text-decoration: none; color: #30659a" href="https://www.wellsfargo.com/online_brokerage/education/trading/volatile/"> Important Notice on Trading in Fast Markets</a> © 1999 - 2006 Barclays. All rights reserved. Member FDIC. Brokerage Products: Not FDIC Insured No Bank Guarantee May Lose Value </div> </td> </tr> </table> <table width=600 border=0 cellpadding=0 cellspacing=0> <tr> <td><img src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width=1 height=1 border=0></td> </tr> </table> <img src="http://link.p0.com/1x1.dyn?0DEH-rGrBrTPbnZxRh37=0" width=1 height=1 width=1 height=1 border=0> </div> </div> </html>

1 0

Direct attached storage needed, slightly offtopic
by Adam McDougall 28 Mar '06

28 Mar '06

Not a netapp ;) but I am looking for recommendations for a directly attached raid shelf that uses scsi disks and has a capacity of around 1 T. We dont need much space at all but I want enough disks to make a raid5 make sense. 7 or less 72gb disks would be ideal, but have enough slots for future expansion. I am looking for something that is COMPLETELY software independant, has its own network port for sending notices and for configuation (and/or config through serial). I don't want to fool around with software needed on the host system to monitor and/or manage it at all. Other than being SATA, various Nexsan products look appropriate, but I'm looking for a company that has appropriate products centering on reliability, price, and decent speed. We have not had specific component problems in the past, so I'm not sure dual controllers, cables etc would help, simply isolated or chronic quirkyness with medium to disasterous effects. I want something that acts solid and predictable from the moment you first plug it in. I'm not sure I want to dive into iSCSI yet, or if it would work well in our environment. My concerns with that are client support (Solaris 9, Linux 2.6, FreeBSD 6.x) and what would happen in the case of network drops. We don't have a seperate storage network now.

2 2

RE: Flow Control Query
by King, Robert 28 Mar '06

28 Mar '06

Glenn, In a couple of cases that I have worked in the past, I have seen flowcontrol issues from a Foundry Big Iron switch. These were typically resolved by setting the switchport to default on the GB interface. I am not a Foundry expert and do not know the commands to do this. However, setting the GB port to default has solved this problem in the past in a few of the cases that I have had. -----Original Message----- From: Philip Boyle [mailto:philip.boyle@eircom.net] Sent: Tuesday, March 28, 2006 11:03 AM To: Glenn Walker Cc: toasters(a)mathworks.com Subject: Re: Flow Control Query Hi Glenn, Thanks for the response. I'd seen a forum posting regarding the 'transmit desired' config options, however, the foundry kit we have only supports either 'flowcontrol' or 'no flowcontrol'. We're going to open a case with Foundry. Given we have this working using fibre, I can only imagine it's a possible hardware incompatability issue. Thanks alot for replying. Regards, Philip On Monday 27 March 2006 18:31, Glenn Walker wrote: > eircom net email protector: Modified this message. > > | Generic modifications by safety-net. > | Details: > | > |https://emailprotector.eircom.net/m?i=x/DMVFsb_LS015ygR,RCgighHsCQ@ma > |ilav > |as00 > > If the filer is set to full (which it is) then the problem lies with > the switch (in every case I've ever seen). > > On the switch, the flowcontrol should be set to 'transmit desired' and > 'receive desired'. Otherwise, the filer will accept whatever the > switch is set to during the negotiation. > > Typically, the Cisco default is 'transmit desired', which forces the > filer into 'receive' mode - meaning the switch can tell the filer to > stop sending frames, but the filer cannot tell the switch to 'pause'. > > However, I've never seen a Foundry switch have a flow control setting > in the past - if I recall, they did not support it's configuration. > I'd be very interested in knowing what Foundry means by 'flow control > enabled' - is that send? receive? Both?? > > Glenn > > ________________________________ > > From: owner-toasters(a)mathworks.com on behalf of Philip Boyle > Sent: Mon 3/27/2006 10:56 AM > To: toasters(a)mathworks.com > Subject: Flow Control Query > > > > Hi guys, > > Have any of you had issues with the network interface on a filer not > negociating to full flowcontrol? > > I'm seeing the issue using gigE dual port cards on the filer > connecting back into a jet core foundry switch Gig Copper Module. > Filer is running ONTAP 7.0.4. > > Interface is fine: > > e9: flags=848043<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > ether xxxxxxxxxxx (auto-1000t-fd-up) flowcontrol full > trunked vifbxx > > Switch setup is fine: > > GigabitEthernetx/x is up, line protocol is up > Hardware is GigabitEthernet, address is xxxxxxxxxx (bia xxxxxxxxxx) > Configured speed auto, actual 1Gbit, configured duplex fdx, actual fdx > Member of Lx VLAN ID xxx, port is untagged, port state is FORWARDING > STP configured to ON, priority is level0, flow control enabled > > ifstat shows flowcontrol set to none :-( > > ifstat e9 > LINK_INFO > Current state: up | Up to downs: 9 | Auto: > on Speed: 1000m | Duplex: full | Flowcontrol: > none > > > Potential hardware compatability issue.........? > > Note, mirrored setup using fibre cards/ports works fine. > > The fibre card is: > 1000sx-fd > > gigE card is: > 1000t-fd > > Thanks, > Philip > > > > > > > > > > ------------------ > Philip Boyle > eircom net systems > > philip.boyle(a)eircom.net > tel: +353 1 701 0921 > mob: +353 85 1744 354 -- ------------------ Philip Boyle eircom net systems philip.boyle(a)eircom.net tel: +353 1 701 0921 mob: +353 85 1744 354

1 0

RE: List volumes in an aggregate
by Ehrhart, Rick 28 Mar '06

28 Mar '06

In FilerView, on the Volumes -> Manage page, there is a filter that will list volumes on a specific aggregate as will as all the flexible volumes. - Rick - > -----Original Message----- > From: Schmaus, Florian [mailto:florian.schmaus@siemens.com] > Sent: Wednesday, March 22, 2006 11:05 PM > To: Haber, David J.; toasters(a)mathworks.com > Subject: RE: List volumes in an aggregate > > > I prefer "aggr status -i" > > Regards > Florian > > > -----Original Message----- > > From: owner-toasters(a)mathworks.com > > [mailto:owner-toasters@mathworks.com] On Behalf Of Haber, David J. > > Sent: Wednesday, March 22, 2006 2:33 PM > > To: toasters(a)mathworks.com > > Subject: List volumes in an aggregate > > > > Can someone please tell me how to display which volumes are > contained > > within an aggregate? Thanks. > > > > > > Confidentiality Notice: > > This message, and any attachments, may contain information > > that is confidential, privileged, and/or protected from > > disclosure under state and federal laws that deal with the > > privacy and security of medical information. If you received > > this message in error or through inappropriate means, please > > reply to this message to notify the Sender that the message > > was received by you in error, and then permanently delete > > this message from all storage media, without forwarding or > > retaining a copy. > > >

3 3

Cher Ami,
by villaran＠pobox.sk 28 Mar '06

28 Mar '06

Cher Ami, Je sais que vous serez étonnez de recevoir mon mail et je vous comprends mais voyez vous cher monsieur, apres mure réflexion, je me décide enfin, mais avant, je tiens a me présenter a vous. Je me rejoui que vous avyez enfin pri contact avec moi. Mon nom est madame Villaran Nenita,je suis une citoyenne philippienne a part entiere et la veuve du défunt ministre des finances philippien qui est mort le 15 mai 2002. Mon mari est tombé gravement malade est a donc été conduit en Europe pour des soins intensifs, mais plus tard il est décédé des suites de sa maladie et a été enterré. J’ai donc hérité de mon défunt mari la somme de 12.000.000 de dollars américains (douze millions de dollars américains). Cet argent, je l’ai caché dans une mallette métallique et déposé au sein d’une compagnie de finance et de sécurité ici en Philippine.Cependant, ayant insisté aupres de la compagnie de finance et de sécurité pour que ma mallette soit gardée avec un maximum de sécurité de tel sorte que personne ni meme une organisation gouvernementale philippienne ne puisse prendre connaissance de son existence, jusqu’a ce que je sois prete a la retirer, alors la dite compagnie pour répondre a mon exigence maximum de sécurité a utilisé des moyens diplomatiques pour envoyer ma mallette hors des philippines et précisément a la maison mere de leur compagnie en côte d’ivoire en Afrique de l’ouest ou ma mallette se trouve donc discretement gardée dans le coffre fort de la compagnie. Ce dépôt a été fait et codé dans le cadre d’un arrangement secret selon lequel ma mallette contient uniquement des biens de famille.Cela signifie donc que la compagnie elle meme ne connaît pas le contenu exact de la mallette qui pour plus de sécurité a été envoyée en côte d’ivoire sous une assurance diplomatique et déclarée comme contenant des biens de famille .Aussi,la raison principale pour laquelle je vous envoie ce courrier est qu’aujourd’hui, n’ayant plus confiance en mon entourage ici en philippine et la côte d’ivoire étant un pays en proie a la guerre, je me retrouve dans une impasse et je voudrais que vous m’aidiez discretement a emmener ma mallette d’argent a une adresse beaucoup plus discrete et stable dans votre pays ou je pourrai commencer a investir. Si vous voulez sincerement m’aider, nous discuterons au préalable du pourcentage que je vous donnerai sur la somme totale se trouvant dans la mallette. En fait, depuis la mort de mon mari, ses freres m’ont chassée de la maison familiale et ont essayé a plusieurs reprises de porté atteinte a ma vie pensant qu’a ma mort tous les documents légaux des biens que possédaient mon mari leur reviendraient de plein droit.Grâce a la notoriété et aux relatons influentes que possedent les freres de mon mari, ils ont réussi a m’arracher toutes les propriétés de mon défunt mari ainsi que tous ses biens matériels. Mais ils ne se sont pas arretés la et m’ont obligée a leur révéler tous les comptes bancaires de mon défunt mari en menaçant a nouveau ma vie.Je leur est donc donner ces informations et ils ont confisqués tous les comptes bancaires de feu mon mari.Je leur est tout révéler sauf l’existence de ce dépôt que j’ai fait au sein de la compagnie de finance et de sécurité a Abidjan en côte d’ivoire car ceci représente tout mon secret espoir caché. La famille de mon défunt mari n’est donc pas informé de l’existence de ce dépôt que j’ai fait au sein de la compagnie de sécurité et elle ne le saura jamais. Cependant, j’ai toujours peur des freres de mon mari car ils continuent a m’espionner et vont jusqu’a écouter mes conversations. C’est pourquoi j’ai décidé de chercher quelqu’un de confiance a l’extérieur des philippines qui m’aidera a retirer la mallette de la compagnie de finance et de sécurité et placer discretement l’argent dans son compte a l’étranger pour un investissement futur. Je vous demande de considérer ma situation qui est celle d’une veuve et de venir a mon aide car aujourd’hui a part cette mallette, je n’ai plus d’argent et ma situation financiere est plus que difficile(ma situation financiere est a zéro). Et ma demande d’aide est d’autant plus urgente que je paye 100 dollars par jour a cette compagnie de sécurité comme frais de stockage et de sécurité de ma mallette. Si vous désirez m’aider, je vous ferez parvenir dans mon prochain email, les coordonnées de la compagnie de securité afin que vous les contactiez pour l’envoie immédiat de cette mallette vers vous pour la securiser. Je vous remercie infiniment pour votre coopération et j’attends de vos nouvelles pour la conclusion de cette affaire. Bien a vous MADAME VILLARAN NENITA NB:Que cette année soit pour nous source d'espoir

1 0

RE: Flow Control Query
by Wollermann, Brian 27 Mar '06

27 Mar '06

We have this issue with our Nortel 8600s. We went round and round with their support and got nowhere. We updated our switch microcode/firmware too. It just doesn't work on the Nortel 8600. It's not the filer but the switch. We tried a different switch and it worked just fine. I guess that's what you get when you don't use what everyone else uses (Cisco). ifstat e4a LINK_INFO Current state: up | Up to downs: 4 | Auto: on Speed: 1000m | Duplex: full | Flowcontrol: none Brian From: owner-toasters(a)mathworks.com on behalf of Philip Boyle Sent: Mon 3/27/2006 10:56 AM To: toasters(a)mathworks.com Subject: Flow Control Query Hi guys, Have any of you had issues with the network interface on a filer not negociating to full flowcontrol? <snip>

1 0

web sitenize ziyaret
by website 27 Mar '06

27 Mar '06

Sayin, Sitenize 100 000 ziyaretci gonderelim mi? Sadece 150 YTL karsiliginda bir ay icinde 100 000 ziyartci sitenize gelsin Nasil mi? daha genis bilgi icin bize email gonderin.

1 0

RE: Direct attached storage needed, slightly offtopic
by Ben Rockwood 27 Mar '06

27 Mar '06

Honestly, if you can afford it, consier NetApp for the gig anyway. With a Filer you can fibre channel local attach, you can NAS, you can to iSCSI, you can attach it to a SAN. It really will grow with you and your needs over time as you evolve. Its only a cost issue. Consider a FAS270 or something "little" and grow it up over time. I'm not saying NetApp is the right solution, but don't rule it out, even for this project. That said, I hear a lot of good things about ATAboy's. benr. -----Original Message----- From: owner-toasters(a)mathworks.com on behalf of Adam McDougall Sent: Mon 3/27/2006 10:45 AM To: toasters(a)mathworks.com Cc: Subject: Direct attached storage needed, slightly offtopic Not a netapp ;) but I am looking for recommendations for a directly attached raid shelf that uses scsi disks and has a capacity of around 1 T. We dont need much space at all but I want enough disks to make a raid5 make sense. 7 or less 72gb disks would be ideal, but have enough slots for future expansion. I am looking for something that is COMPLETELY software independant, has its own network port for sending notices and for configuation (and/or config through serial). I don't want to fool around with software needed on the host system to monitor and/or manage it at all. Other than being SATA, various Nexsan products look appropriate, but I'm looking for a company that has appropriate products centering on reliability, price, and decent speed. We have not had specific component problems in the past, so I'm not sure dual controllers, cables etc would help, simply isolated or chronic quirkyness with medium to disasterous effects. I want something that acts solid and predictable from the moment you first plug it in. I'm not sure I want to dive into iSCSI yet, or if it would work well in our environment. My concerns with that are client support (Solaris 9, Linux 2.6, FreeBSD 6.x) and what would happen in the case of network drops. We don't have a seperate storage network now.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters