toasters

toasters@lists.teaparty.net

13531 discussions

820 Ontap 6.5.6 looses connections
by Stephen C Woods 31 May '06

31 May '06

We're completely baffled. NetApp Release 6.5.6: Tue Oct 4 16:54:43 PDT 2005 System ID: 0033602136 (royce) System Serial Number 102XXX (royce) System Rev: B0 Backplane Part Number: 0 Backplane Rev: B0 Backplane Serial Number: 1028811 slot 0: System Board Processors: 1 Memory Size: 1024 MB CIOB Revision ID: 3 slot 0: FastEnet-10/100 Ethernet Controller e0 MAC Address: 00:a0:98:00:dd:77 (auto-unknown-cfg_down) slot 4: Gigabit Ethernet Controller III e4 MAC Address: 00:03:47:b2:de:a0 (auto-1000sx-fd-up) slot 8: FC Host Adapter 8 42 Disks: 1449.0GB 6 shelves with VEM slot 11: NVRAM Memory Size: 128 MB Directly connected to a Cisco C6506. For the past 15 days we've been suffering from dropped (and resumed after some random time) NSF connections. What has been occurring is that the file stops responding (e.g. to pings). Connecting to the console and pinging anything restarts connections. We have another identical machine that is NOT having any problems. We have swapped NIC, Fiber cable, GBICs on the Cisco, switched ports on the Cisco, and even swapped our spare head in. Any one have any ideas? <scw> postmaster(a)seas.ucla.edu -- ----- Stephen C. Woods; UCLA SEASnet; 2567 Boelter hall; LA CA 90095; (310)-825-8614 Unless otherwise noted these statements are my own, Not those of the University of California. Internet mail:scw@seas.ucla.edu

1 0

Looking for recommendations on a fibre channel HBA to connect a Sun v480 to a NetApp FAS3020
by Demaagd, Dave 31 May '06

31 May '06

Currently have a Sun v480 running Solaris 8, and some time in the next month or so, I'll be getting an FAS3020, and I want to hook the two units together via fibre channel, and I'm looking for recommendations on what would be a good HBA to use (or even what not to use - I'm open to any information at this point). What I've found so far, from a little googling, seems to indicate that there's not a lot out there outside of Sun's StorageTek line. -- Dave DeMaagd, DOL QA Engineering dave.demaagd(a)dig.com | 8186233755 | 8182627958

1 0

Qtrees in 7.2
by Grey Friday 31 May '06

31 May '06

I have heard that file permissions will be preserved on mixed qtrees. Does anyone know if this is the case and how it works? Thanks, Grey

1 0

RE: broken disk becomes spare after reconstruct
by Glenn Walker 31 May '06

31 May '06

Essentially, the drive was sent a SCSI command and wasn't ready\capable of facilitating that command. Unsure which command in question was issued, but I recollect that it has typically meant 'no response'. Glenn -----Original Message----- From: Willeke, Jochen [mailto:Jochen.Willeke@wincor-nixdorf.com] Sent: Wednesday, May 31, 2006 9:54 AM To: Glenn Walker; toasters(a)mathworks.com Subject: RE: broken disk becomes spare after reconstruct Hi, one additional question about this issue. What actually happend that made ontap produce this error: [scsi.cmd.notReadyCondition:notice]: Device 2b.35: Device returns not yet ready: CDB 0x28:18974bb9:0009: Sense Data SCSI:not ready - (0x2 - 0x4 0x7 0x2a)(65103) I have never seen this error before!?! Regards and thanks for your support Jochen -----Original Message----- From: Glenn Walker [mailto:ggwalker@mindspring.com] Sent: Wednesday, May 31, 2006 3:44 PM To: Willeke, Jochen; toasters(a)mathworks.com Subject: RE: broken disk becomes spare after reconstruct Basically it appears that the disk started to work correctly again (ie, it was responsive to commands). At that point, it will return it to spare pool... Most of the time disks don't actually physically fail - ONTAP is very concerned about data consistency so it will fail misbehaving drives so that it no longer uses them. Sometimes the drives start behaving again, and can be used... ATA drives are very bad for this: they typically go into internal recovery procedures and don't communicate status to the controller\OS - FCAL drives are very good about communicating status and continuing with other operations in the meantime. I've typically seen this behavior on R200's more than FAS-series (with FCAL drives). Out of curiosity - are you utilizing 7.0.4 or newer? Wondering if maintenance garage would help... Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Willeke, Jochen Sent: Wednesday, May 31, 2006 8:50 AM To: toasters(a)mathworks.com Subject: broken disk becomes spare after reconstruct Hello Toasters :-) i have seen something strange on one of our R200. Last week i got an error message with the following output: [scsi.cmd.notReadyCondition:notice]: Device 2b.35: Device returns not yet ready: CDB 0x28:18974bb9:0009: Sense Data SCSI:not ready - (0x2 - 0x4 0x7 0x2a)(65103). [scsi.cmd.checkCondition:error]: Device 2b.35: Check Condition: CDB 0x28:154efb9d:022e: Sense Data SCSI:not ready - (0x2 - 0x4 0x7 0x2a)(209311). [raid.config.filesystem.disk.recovering:error]: Attempting to bring file system Disk /aggr0/plex0/rg1/2b.35 Shelf 2 Bay 3 [NETAPP X266_MTOMC320PAD R5VV] S/N [A81K4MBE] back into service. ......normal procedure of taking one spare and reconstruct the raid group. But then comes what i am wondering about..... [raid.assim.disk.spare:notice]: Sparing Disk /2b.35 Shelf 2 Bay 3 [NETAPP X266_MTOMC320PAD R5VV] S/N [A81K4MBE], because volume is online and complete The System takes the broken disk as a spare?!? How can this be? Perhaps anybody can help because NOW does not explain this situation deep enough to make it understandable to me :D Regards Jochen

1 0

RE: broken disk becomes spare after reconstruct
by Willeke, Jochen 31 May '06

31 May '06

Hi, one additional question about this issue. What actually happend that made ontap produce this error: [scsi.cmd.notReadyCondition:notice]: Device 2b.35: Device returns not yet ready: CDB 0x28:18974bb9:0009: Sense Data SCSI:not ready - (0x2 - 0x4 0x7 0x2a)(65103) I have never seen this error before!?! Regards and thanks for your support Jochen -----Original Message----- From: Glenn Walker [mailto:ggwalker@mindspring.com] Sent: Wednesday, May 31, 2006 3:44 PM To: Willeke, Jochen; toasters(a)mathworks.com Subject: RE: broken disk becomes spare after reconstruct Basically it appears that the disk started to work correctly again (ie, it was responsive to commands). At that point, it will return it to spare pool... Most of the time disks don't actually physically fail - ONTAP is very concerned about data consistency so it will fail misbehaving drives so that it no longer uses them. Sometimes the drives start behaving again, and can be used... ATA drives are very bad for this: they typically go into internal recovery procedures and don't communicate status to the controller\OS - FCAL drives are very good about communicating status and continuing with other operations in the meantime. I've typically seen this behavior on R200's more than FAS-series (with FCAL drives). Out of curiosity - are you utilizing 7.0.4 or newer? Wondering if maintenance garage would help... Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Willeke, Jochen Sent: Wednesday, May 31, 2006 8:50 AM To: toasters(a)mathworks.com Subject: broken disk becomes spare after reconstruct Hello Toasters :-) i have seen something strange on one of our R200. Last week i got an error message with the following output: [scsi.cmd.notReadyCondition:notice]: Device 2b.35: Device returns not yet ready: CDB 0x28:18974bb9:0009: Sense Data SCSI:not ready - (0x2 - 0x4 0x7 0x2a)(65103). [scsi.cmd.checkCondition:error]: Device 2b.35: Check Condition: CDB 0x28:154efb9d:022e: Sense Data SCSI:not ready - (0x2 - 0x4 0x7 0x2a)(209311). [raid.config.filesystem.disk.recovering:error]: Attempting to bring file system Disk /aggr0/plex0/rg1/2b.35 Shelf 2 Bay 3 [NETAPP X266_MTOMC320PAD R5VV] S/N [A81K4MBE] back into service. ......normal procedure of taking one spare and reconstruct the raid group. But then comes what i am wondering about..... [raid.assim.disk.spare:notice]: Sparing Disk /2b.35 Shelf 2 Bay 3 [NETAPP X266_MTOMC320PAD R5VV] S/N [A81K4MBE], because volume is online and complete The System takes the broken disk as a spare?!? How can this be? Perhaps anybody can help because NOW does not explain this situation deep enough to make it understandable to me :D Regards Jochen

1 0

RE: broken disk becomes spare after reconstruct
by Glenn Walker 31 May '06

31 May '06

Maintenance Garage is a new functionality (introduced in 7.0.4 I believe) that helps to remove drives when they aren't functioning properly and trying to recover them without outright failing them. It is also supposed to allow operations to continue to all other drives in the raidgroup and when\if the drive is recoverable only update the changes that the one questionable drive has missed. I'm paraphrasing quite a bit, but I recall that to be the gist. Either way, pretty cool stuff. Glenn -----Original Message----- From: Willeke, Jochen [mailto:Jochen.Willeke@wincor-nixdorf.com] Sent: Wednesday, May 31, 2006 9:51 AM To: Glenn Walker; toasters(a)mathworks.com Subject: RE: broken disk becomes spare after reconstruct Hi toasters, we are running 7.0.1R1. BTW: what is the maintenance garage? Never heard of this. Regards Jochen -----Original Message----- From: Glenn Walker [mailto:ggwalker@mindspring.com] Sent: Wednesday, May 31, 2006 3:44 PM To: Willeke, Jochen; toasters(a)mathworks.com Subject: RE: broken disk becomes spare after reconstruct Basically it appears that the disk started to work correctly again (ie, it was responsive to commands). At that point, it will return it to spare pool... Most of the time disks don't actually physically fail - ONTAP is very concerned about data consistency so it will fail misbehaving drives so that it no longer uses them. Sometimes the drives start behaving again, and can be used... ATA drives are very bad for this: they typically go into internal recovery procedures and don't communicate status to the controller\OS - FCAL drives are very good about communicating status and continuing with other operations in the meantime. I've typically seen this behavior on R200's more than FAS-series (with FCAL drives). Out of curiosity - are you utilizing 7.0.4 or newer? Wondering if maintenance garage would help... Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Willeke, Jochen Sent: Wednesday, May 31, 2006 8:50 AM To: toasters(a)mathworks.com Subject: broken disk becomes spare after reconstruct Hello Toasters :-) i have seen something strange on one of our R200. Last week i got an error message with the following output: [scsi.cmd.notReadyCondition:notice]: Device 2b.35: Device returns not yet ready: CDB 0x28:18974bb9:0009: Sense Data SCSI:not ready - (0x2 - 0x4 0x7 0x2a)(65103). [scsi.cmd.checkCondition:error]: Device 2b.35: Check Condition: CDB 0x28:154efb9d:022e: Sense Data SCSI:not ready - (0x2 - 0x4 0x7 0x2a)(209311). [raid.config.filesystem.disk.recovering:error]: Attempting to bring file system Disk /aggr0/plex0/rg1/2b.35 Shelf 2 Bay 3 [NETAPP X266_MTOMC320PAD R5VV] S/N [A81K4MBE] back into service. ......normal procedure of taking one spare and reconstruct the raid group. But then comes what i am wondering about..... [raid.assim.disk.spare:notice]: Sparing Disk /2b.35 Shelf 2 Bay 3 [NETAPP X266_MTOMC320PAD R5VV] S/N [A81K4MBE], because volume is online and complete The System takes the broken disk as a spare?!? How can this be? Perhaps anybody can help because NOW does not explain this situation deep enough to make it understandable to me :D Regards Jochen

1 0

RE: broken disk becomes spare after reconstruct
by Willeke, Jochen 31 May '06

31 May '06

Hi toasters, we are running 7.0.1R1. BTW: what is the maintenance garage? Never heard of this. Regards Jochen -----Original Message----- From: Glenn Walker [mailto:ggwalker@mindspring.com] Sent: Wednesday, May 31, 2006 3:44 PM To: Willeke, Jochen; toasters(a)mathworks.com Subject: RE: broken disk becomes spare after reconstruct Basically it appears that the disk started to work correctly again (ie, it was responsive to commands). At that point, it will return it to spare pool... Most of the time disks don't actually physically fail - ONTAP is very concerned about data consistency so it will fail misbehaving drives so that it no longer uses them. Sometimes the drives start behaving again, and can be used... ATA drives are very bad for this: they typically go into internal recovery procedures and don't communicate status to the controller\OS - FCAL drives are very good about communicating status and continuing with other operations in the meantime. I've typically seen this behavior on R200's more than FAS-series (with FCAL drives). Out of curiosity - are you utilizing 7.0.4 or newer? Wondering if maintenance garage would help... Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Willeke, Jochen Sent: Wednesday, May 31, 2006 8:50 AM To: toasters(a)mathworks.com Subject: broken disk becomes spare after reconstruct Hello Toasters :-) i have seen something strange on one of our R200. Last week i got an error message with the following output: [scsi.cmd.notReadyCondition:notice]: Device 2b.35: Device returns not yet ready: CDB 0x28:18974bb9:0009: Sense Data SCSI:not ready - (0x2 - 0x4 0x7 0x2a)(65103). [scsi.cmd.checkCondition:error]: Device 2b.35: Check Condition: CDB 0x28:154efb9d:022e: Sense Data SCSI:not ready - (0x2 - 0x4 0x7 0x2a)(209311). [raid.config.filesystem.disk.recovering:error]: Attempting to bring file system Disk /aggr0/plex0/rg1/2b.35 Shelf 2 Bay 3 [NETAPP X266_MTOMC320PAD R5VV] S/N [A81K4MBE] back into service. ......normal procedure of taking one spare and reconstruct the raid group. But then comes what i am wondering about..... [raid.assim.disk.spare:notice]: Sparing Disk /2b.35 Shelf 2 Bay 3 [NETAPP X266_MTOMC320PAD R5VV] S/N [A81K4MBE], because volume is online and complete The System takes the broken disk as a spare?!? How can this be? Perhaps anybody can help because NOW does not explain this situation deep enough to make it understandable to me :D Regards Jochen

1 0

RE: broken disk becomes spare after reconstruct
by Glenn Walker 31 May '06

31 May '06

Basically it appears that the disk started to work correctly again (ie, it was responsive to commands). At that point, it will return it to spare pool... Most of the time disks don't actually physically fail - ONTAP is very concerned about data consistency so it will fail misbehaving drives so that it no longer uses them. Sometimes the drives start behaving again, and can be used... ATA drives are very bad for this: they typically go into internal recovery procedures and don't communicate status to the controller\OS - FCAL drives are very good about communicating status and continuing with other operations in the meantime. I've typically seen this behavior on R200's more than FAS-series (with FCAL drives). Out of curiosity - are you utilizing 7.0.4 or newer? Wondering if maintenance garage would help... Glenn -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Willeke, Jochen Sent: Wednesday, May 31, 2006 8:50 AM To: toasters(a)mathworks.com Subject: broken disk becomes spare after reconstruct Hello Toasters :-) i have seen something strange on one of our R200. Last week i got an error message with the following output: [scsi.cmd.notReadyCondition:notice]: Device 2b.35: Device returns not yet ready: CDB 0x28:18974bb9:0009: Sense Data SCSI:not ready - (0x2 - 0x4 0x7 0x2a)(65103). [scsi.cmd.checkCondition:error]: Device 2b.35: Check Condition: CDB 0x28:154efb9d:022e: Sense Data SCSI:not ready - (0x2 - 0x4 0x7 0x2a)(209311). [raid.config.filesystem.disk.recovering:error]: Attempting to bring file system Disk /aggr0/plex0/rg1/2b.35 Shelf 2 Bay 3 [NETAPP X266_MTOMC320PAD R5VV] S/N [A81K4MBE] back into service. ......normal procedure of taking one spare and reconstruct the raid group. But then comes what i am wondering about..... [raid.assim.disk.spare:notice]: Sparing Disk /2b.35 Shelf 2 Bay 3 [NETAPP X266_MTOMC320PAD R5VV] S/N [A81K4MBE], because volume is online and complete The System takes the broken disk as a spare?!? How can this be? Perhaps anybody can help because NOW does not explain this situation deep enough to make it understandable to me :D Regards Jochen

1 0

I: LDL
by l.lottolotto＠virgilio.it 31 May '06

31 May '06

1 0

broken disk becomes spare after reconstruct
by Willeke, Jochen 31 May '06

31 May '06

Hello Toasters :-) i have seen something strange on one of our R200. Last week i got an error message with the following output: [scsi.cmd.notReadyCondition:notice]: Device 2b.35: Device returns not yet ready: CDB 0x28:18974bb9:0009: Sense Data SCSI:not ready - (0x2 - 0x4 0x7 0x2a)(65103). [scsi.cmd.checkCondition:error]: Device 2b.35: Check Condition: CDB 0x28:154efb9d:022e: Sense Data SCSI:not ready - (0x2 - 0x4 0x7 0x2a)(209311). [raid.config.filesystem.disk.recovering:error]: Attempting to bring file system Disk /aggr0/plex0/rg1/2b.35 Shelf 2 Bay 3 [NETAPP X266_MTOMC320PAD R5VV] S/N [A81K4MBE] back into service. ......normal procedure of taking one spare and reconstruct the raid group. But then comes what i am wondering about..... [raid.assim.disk.spare:notice]: Sparing Disk /2b.35 Shelf 2 Bay 3 [NETAPP X266_MTOMC320PAD R5VV] S/N [A81K4MBE], because volume is online and complete The System takes the broken disk as a spare?!? How can this be? Perhaps anybody can help because NOW does not explain this situation deep enough to make it understandable to me :D Regards Jochen

1 0

Prayer Request !! (Please Read)
by Bernett Adelle 31 May '06

31 May '06

Beloved In Christ, Greetings in the name of our Lord Jesus Christ the Prince of peace and the KING of kings. It's a great pleassure for me to write you this short mail of mine, I am Bernett Adelle a 25 years old christian girl, I am sorry for any inconveniency that this mail may cause you. I don't have a computer of my own, a missionary from France allows me to use her computer since she can't help me in any other way. I am a Victim of war in (COTE D'IVOIRE) Africa, I do have a small business before the war where I make my ends meat but unfortunately the REBELS came and destroyed all my properties and set fire on houses and offices of which mine is one of them, all my things are gone with fire,all what I have worked for in the past years are gone just on one day. You know very well that a victim of war have nothing left for herthat is why I am writing you this mail to help me in any way the Lord Lord lay in your heart, to feed and clothe myself and if possible to re-start my little business again and I know that the Lord shall bless you in return for doing this, If you can't help me financially I will be glad if you can help me with FOOD and clothes, and also shoes, any other things that the LORD lay in your heart for me will be of a great help to me as well. I as at now I NO have where to sleep comfortable, no good clothes, no shoes, infact I lack so many things, I am recently living with my pastor where we are about 11 people living in a single room. Anything that the Lord lay in your heart for me will really be of a great HELP at this point in time as I am seriously going hunger,Please kindly let me know what help you can render so that I can send you where to send it. I will be expecting your response my beloved in Christ.May the Lord bless you abundanly and grant you success in all your dealinds. May the grace of our Lord Jesus Christ be with you and your house hold for ever. Yours Sister In Christ, Bernett Adelle NB: If you have doubts I will send you my PHOTOGRAPH and the contacts of my pastor for you to contact him and confirm things from him directly. ¡Miles de amigos con tus mismas aficiones! http://www.latinchat.com

1 0

Job Vacancy
by Subsea Gas Oil Company 31 May '06

31 May '06

ENGLAND SUBSEA OIL COMPANY (ESOC). Job Vacancies TITLE: PRODUCTION SHARING CONTRACT Job ID: PSC/JV/ESOC 01145-06 ENGLAND. England Sub Sea Oil Company (ESOC) has immediate employment opportunities. ESOC intends to invite experienced individuals/expatriates or Consultancy firm capable of rendering expertise services in various fields of Engineering, Construction and Installation, NDT , Geology, Project Management, Welding and Fabrication, Plant/Start-Up, Maintenance, Mechanical/Technical/Design Engineering, Information Technology, Administrative and Commissioning. ENTITLEMENT, BENEFITS AND PACKAGES; . A very attractive net salary paid in US$, Sterling or Euros equivalent depending on employee home country and currency preference with annual salary review. . Quality single or family housing accommodation in company community. . Free medical/dental care in ENGLAND for employee and family. . Excellent educational assistance benefits with family status employment. . Paid airfares allowing full flexibility with holiday travel. . Personal effects shipment and excess baggage allowances. . Full access to some to some of the finest and social recreational facilities in ENGLAND. . Life Insurance and Paid vacation. . Official vehicle/Maximum security in work environment and housing community. JOB STATUS: Full-Time and contract SALARY INDICATION: US$85,400.00-USD35, 000.00 depending upon experience and field of specialization. Interested candidates are to email resume and details of experience to subsea_oilgas_recruitments(a)yahoo.com http://www.subsea.org/ __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

VoIP phone
by Telextreme 31 May '06

31 May '06

I look to representatives the world-wide level for I negotiate of VoIP telephone saw Internet: http://www.telextreme.pt.vu Busco personas a nivel mundial para negocio de teléfono VoIP: http://www.telextreme.pt.vu Procuro representantes a nível mundial para negocio de telefone VoIP via internet: http://www.telextreme.pt.vu Tks. Luis Conceição

1 0

RELAY TO THE MENTIONED CONTACT PERSON WITHIN
by m_derijk1＠virgilio.it 30 May '06

30 May '06

RELAY TO THE MENTIONED CONTACT PERSON WITHIN L- INTE'L, NEDERLAND. Laan 44 2289 DGPostbus 3059 2280 GB Ri''ijk Following our recent database bingo promotion we do write to advice you to initiate contact with the stated promotion agent below within one weeks of the receipt of this mail. To avoid your prize from being considered unclaimed within the stipulated time, We do urge you to fully cooperate with us so that you could collect your winning. In course of any change of address do inform our agent as soon as possible. L-DAY INT', announces today the winners of its bingo program for this quarter. This program is conducted every quarter with email addresses of database-net users. The draws are usually from about 26,000 email addresses from all over the world,but as a result of increasing globalization of database network and its efficiency this opportunities are been increases to 30,000 net-users, which are selected from the internet randomly. The draws are made in four categories using a special server balloting system. Your receipt of this mail implies that your email address has won in category E of the draws. Your email address drew the winning numbers: 81:45:27:4:12 serial number 591864,batch number LDIN/070854/NL/06, ref number LDIN 46820 and security credited file numbers 02-45-69-151 and subsequently won the sum of 600,000,00 EURO (SIX HUNDERED THOUSAND EURO). You are at this point advised to contact our NL agent below to begin your claim: PAYER: W. DAVES Email: windijdaves(a)netscape.net You will be given a form to complete and return same to any one of our appointed financial trustees. Their winning/processing department will validate your winning and provide information on the collection of your prize. All NOT claimed not later than 20th of June,2006. After this date all unclaimed funds will be included in the next stake. Sincerely yours, SELINA ARON

1 0

Good day and Compliments (Waiting to hear from you)
by The Royal Palace of Ogoni Kingdom 29 May '06

29 May '06

Good day and Compliments, I got your contact from the internet, and picked interest to write you.I am a female student of University of Cotonou Republic Du Benin. I am 24 yrs old. I'd like any person who can be caring, loving and home oriented. I will love to have a long-term relationship with you and to know more about you. I would like to build up a solid foundation with you in time coming if you will be able to help me in this transaction. Well, my father died earlier two months ago and left me and my younger brother behind. He was a king, which our town citizens titled him before he died. I was a princess to him and I am the only person who can take care of his wealth now because my younger brother is still a kid and my mother is not literate enough to know my entire father's wealth. He left $27,350,000 [Twenty Seven Million Three Hundred and Fifty Thousand Dollars)with The Union Bank Swiss Finance London United Kingdom(UBS) and I don't know how to start up with the whole thing and what I will do to invest this money somewhere in abroad, so that my father's kindred will not take over what belongs to my father and his name, which they are planning to do without my consent because I am a female as stated by our culture in the town. That is why I felt happy when I saw your contact because I strongly believe that by the grace of God, you will surely help me invest this money. I am ready to pay 20% of the total amount to you if you will sincerely help us in this business and another 10%interest of annual income to you, for handling this business for us, which you will strongly have absolute control over. If you will handle this project sincerely and also willing to assist me in lifting this fund, kindly reach me and I will link you to The Union Bank Swiss Finance London United Kingdom (UBS) for further agreement. Please, note that this transaction is 100% risk free and I hope to commence the transaction as quickly as possible, I look forward hearing from you soonest. Yours sincerely, Princess Naomi Williams Ajana. EMail: princessnaomi_williams(a)zonai.com

1 0

Re: Mail Delivery (failure grain@retemail.es)
by Auto-reply from grain＠retemail.es 28 May '06

28 May '06

1 0

Please check this important information
by nationallotery＠virgilio.it 28 May '06

28 May '06

To file for your claim, please contact our fiducial agent: Mr.Omar Peng Global Consult. Email:fastaward2006@excite.it Tel: +31-627-364-498 Please be informed of the result of the national lotery on line free game 2006 Taged (Fast). paticipant were selected through a computer ballot system. Your email ID was included among the 25,000 email addresses and entered for Batch NL011944 with Ticket No. NL/23/00/88FAST, FastRef no 442101 won in the 2nd Category among the luckily selected 1-9 batch winners. You're advised to contact our fiducial agent immidiately indicating your winning informations for verification. Please note in order to avoid unnecessary delays and complications remember to quote your reference number and batch numbers in all correspondence. Furthermore,should there be any change of address do inform our agent as soon as possible. Congratulations once more from our members of staff and thank you for being part of our promotional program. Note: Anybody under the age of 18 is automaticallydisqualified. Yours Sincerely, MING LIEW Lotery Coordinator National Lotery Group

1 0

Antigen found VIRUS= HTML/Phishbank.Eba!Trojan (CA(InoculateIT)) virus
by ANTIGEN_MSGATE-B 27 May '06

27 May '06

Antigen for Exchange found Body of Message infected with VIRUS= HTML/Phishbank.Eba!Trojan (CA(InoculateIT)) virus. The file is currently Removed. The message, "Account Confirmation!", was sent from owner-toasters(a)mathworks.com and was discovered in IMC Queues\Inbound located at Mobilix AS/IMC_GATE_B/MSGATE-B.

1 0

Account Confirmation!
by ebay 27 May '06

27 May '06

1 0

I: LDL DRAW
by lottolotto10＠virgilio.it 26 May '06

26 May '06

1 0

26:05:06 GOOD NEWS! SINCERE COMPENSATION.
by Senator Collins Smith 25 May '06

25 May '06

I have a new email address!You can now email me at: senatorcollinssmith1(a)yahoo.co.in 26:05:06 GOOD NEWS! SINCERE COMPENSATION. Dear Friend, I'm happy to inform you about my success in getting the fund transferred to a Swiss Account with the cooperation of a new partner from paraguay who is an international business man. Presently I'm in Paraguay for investment projects with my own share of the total sum. Meanwhile, I did not forget your past efforts and attempts to assist me in transferring those funds despite that it failed us some how. Now contact my secretary, his contact is: Name: Mr. Desmond Kalu Email: desmondkalu12(a)myway.com OR desmondkalu12(a)excite.com Ask his to send you the total $450.000.00 (Four Hundred and Fifty Thousand US Dollars) which I kept for your compensation for all the past efforts and attempts to assist me in this matter. I appreciated your efforts at that time very much. So feel free and get in touched with my secretary Mrs Desmond Kalu and tell her where to send the amount to you. Please do let me know immediately you receive it so that we can share the joy after all the sufferness at that time. In the moment, I am very busy here because of the investment projects which me and the new partner are having at hand. Finally, remember that I had forwarded instruction to my secretary on your behalf to receive that money, so feel free to get in touch with Mr. Desmond Kalu and he will send the amount to you without any delay do send your telephone number to him to enable him talk to you on phone as soon as he send the draft to you. With best regards Senator. Collins Smith - Senator Collins Smith

1 0

Re: Any script to analyse Autosupport weekly log???
by Steven Lim 24 May '06

24 May '06

Hi Chris, The "Autosupport Dashboard" is a great tool. That's exactly what I need. Thanks for the help. Cheers, Steven On 5/24/06, Chris Madden <maddenca(a)yahoo.com> wrote: > Hi, > > NetApp recently introduced viewing of ASUP data and proactive > recommendations on the NOW website; it's called the "AutoSupport Dashboard" > and is here: https://now.netapp.com/eservice/ASUPSearchServlet > > The ASUP viewing will show you all ASUPs submitted to NetApp, but the > proactive recommendations require at least 2 x the WEEKLY_LOG ASUPs to have > been received. > > Hope that helps. > > Cheers, > -Chris > > > -----Original Message----- > From: Blake Golliher [mailto:thelastman@gmail.com] > Sent: Wednesday, May 24, 2006 07:07 > To: Steven Lim > Cc: Toasters > Subject: Re: Any script to analyse Autosupport weekly log??? > > Does DFM not capture it all for you? What are you looking for that DFM > doesn't get for you? Or are you looking more at proactive stuff, predicting > when a disk will fail that kinda stuff? > > -Blake > > On 5/23/06, Steven Lim <steven.kblim(a)gmail.com> wrote: > > Hi Guys, > > > > Anyone of you have any scripts that analyse a list of autosupport and > > generate a summary of problems/potential problems?? Although if there > > is any fault, ASUP will sent out a seperate mail but this is only for > > critical problem, what bout NOT critical error?? I have also DFM > > monitoring these filers. > > > > Many thanks. > > > >

1 0

AW: command usage summary, 2006
by Geissler, Norbert 24 May '06

24 May '06

Hi Tim, fine tool to get an overview of command usage ! I made a small enhancement, because due to security reasons we don't use rsh but ssh for remote administration of filers... Feel free to use this enhanced script below in the future. Norbert =================== enhanced cmd summary script begin ============================ #!/usr/local/bin/perl # # This script summarizes command and api usage on a # Network Appliance filer running Data ONTAP. In other words, it counts # how many times each command/sub-command has been used, by # looking at the auditlogs. # # Usage on Unix is: # # cd /mnt/$FILER/etc # where /mnt/$FILER is the mounted root volume # perl cmd_summary.pl # # or on Windows: # # cd F: # where F: is the mounted root volume # cd \etc # perl cmd_summary.pl # # In other words, change directories to the /etc directory of the # filer's root volume, and run this script. The script looks at # the messages file and all the auditlog files, and summarizes # command and api usage. # # The output of the command will look like this: # ############################################################################ # System tweety (ID 0033611543) is running NetApp Release 7.0.1 # count=167 rsh=sysconfig -a # count=28 rsh=version # count=11 rsh=options autosupport.enable # count=167 ssh=sysconfig -a # count=28 ssh=version # count=571 api=options-get # count=100 api=options-set # count=23 cons=version ############################################################################ # # The lines in this output specify the frequency count of things invoked in # three categories: rsh (commands submitted using rsh), cons (commands # submitted using telnet or on the serial console), and api (things executed # using the ONTAPI API interface). # fourth category added: ssh (commands submitted using ssh) # my %rshusage; my %sshusage; my %consusage; my %apiusage; my $system = ""; my $anyerr = 0; foreach $f (<messages log/auditlog*>) { if ( ! open(FF, $f) ) { print STDERR "Error: unable to open $f - $!\n\n" ."This program must be run in the " ."'etc' directory of the filer's root volume.\n\n"; $anyerr = 1; next } while (<FF>) { if ( /kern.log.rotate:/ || /log_rotate:/ ) { chop; $system = $_; $system =~ s/.*System /System /; } elsif ( /RSH INPUT COMMAND/ ) { my $s = $_; $s =~ s/.*RSH INPUT COMMAND is //; my @words = split(/[\s;]/,$s); my $cmd = $words[0]." ".$words[1]; if ( $words[0] ne "" ) { if ( not defined $rshusage{$cmd} ) { $rshusage{$cmd} = 1; } else { $rshusage{$cmd} += 1; } } } elsif ( /SSH INPUT COMMAND/ ) { my $s = $_; $s =~ s/.*SSH INPUT COMMAND is //; my @words = split(/[\s;]/,$s); my $cmd = $words[0]." ".$words[1]; if ( $words[0] ne "" ) { if ( not defined $sshusage{$cmd} ) { $sshusage{$cmd} = 1; } else { $sshusage{$cmd} += 1; } } } elsif ( /IN:console shell:/ ) { my $s = $_; $s =~ s/.*console shell://; my @words = split(/\s/,$s); my $cmd = $words[0]." ".$words[1]; if ( $words[0] ne "" ) { if ( not defined $consusage{$cmd} ) { $consusage{$cmd} = 1; } else { $consusage{$cmd} += 1; } } } elsif ( /Java_Thread.*:API:in:/ && ! /relog syslog/ ) { chop; my $api = $_; $api =~ s/[^<]*<//; $api =~ s/\/?>.*//; if ( not defined $apiusage{"Java-$api"} ) { $apiusage{"Java-$api"} = 1; } else { $apiusage{"Java-$api"} += 1; } } elsif ( /:API:in:/ && ! /relog syslog/ ) { chop; my $api = $_; $api =~ s/.*\/admin\'><//; $api =~ s/.*version="..."><//; $api =~ s/\/?>.*//; if ( not defined $apiusage{$api} ) { $apiusage{$api} = 1; } else { $apiusage{$api} += 1; } } } } if ( $system ne "" ) { print("$system\n"); } foreach $key ( sort { $rshusage{$b} <=> $rshusage{$a} } keys %rshusage ) { print("count=$rshusage{$key} rsh=$key\n"); } foreach $key ( sort { $sshusage{$b} <=> $sshusage{$a} } keys %sshusage ) { print("count=$sshusage{$key} ssh=$key\n"); } foreach $key ( sort { $consusage{$b} <=> $consusage{$a} } keys %consusage ) { print("count=$consusage{$key} cons=$key\n"); } foreach $key ( sort { $apiusage{$b} <=> $apiusage{$a} } keys %apiusage ) { print("count=$apiusage{$key} api=$key\n"); =================== enhanced cmd summary script end ============================ -----Ursprüngliche Nachricht----- Von: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] Im Auftrag von Tim Thompson Gesendet: Mittwoch, 24. Mai 2006 00:00 An: toasters(a)mathworks.com Betreff: command usage summary, 2006 The following is a request similar to one made here a little over a year ago. The recent survey about advanced commands was very useful, and reminded us that it would be good to refresh and augment our data about command usage. Attached below is a perl script that will look at the auditlogs of a filer running Data ONTAP and summarize command, sub-command, and api usage. Only a summary is produced - it shouldn't contain any customer-sensitive information. It will not put any load on the filer, and should consume only a minute or so of CPU time on the machine running the perl script (depending on how large your auditlog files are). We would greatly appreciate it if anyone using Data ONTAP could run this script on as many filers as possible and send the output to usage(a)netapp.com (a special address set up to collect this data). Usage is described in the comments at the top of the script. If you don't feel comfortable running a script you've received through email, you can run the identical script that you can find in the Toolchest section of NetApp's NOW site: http://now.netapp.com/NOW/download/tools/cmd_summary/ Thanks very much for your help. ...Tim Thompson...Network Appliance, Inc...tjt(a)netapp.com... #!/usr/local/bin/perl # # This script summarizes command and api usage on a # Network Appliance filer running Data ONTAP. In other words, it counts # how many times each command/sub-command has been used, by # looking at the auditlogs. # # Usage on Unix is: # # cd /mnt/$FILER/etc # where /mnt/$FILER is the mounted root volume # perl cmd_summary.pl # # or on Windows: # # cd F: # where F: is the mounted root volume # cd \etc # perl cmd_summary.pl # # In other words, change directories to the /etc directory of the # filer's root volume, and run this script. The script looks at # the messages file and all the auditlog files, and summarizes # command and api usage. # # The output of the command will look like this: # ############################################################################ # System tweety (ID 0033611543) is running NetApp Release 7.0.1 # count=167 rsh=sysconfig -a # count=28 rsh=version # count=11 rsh=options autosupport.enable # count=571 api=options-get # count=100 api=options-set # count=23 cons=version ############################################################################ # # The lines in this output specify the frequency count of things invoked in # three categories: rsh (commands submitted using rsh), cons (commands # submitted using telnet or on the serial console), and api (things executed # using the ONTAPI API interface). my %rshusage; my %consusage; my %apiusage; my $system = ""; my $anyerr = 0; foreach $f (<messages log/auditlog*>) { if ( ! open(FF, $f) ) { print STDERR "Error: unable to open $f - $!\n\n" ."This program must be run in the " ."'etc' directory of the filer's root volume.\n\n"; $anyerr = 1; next } while (<FF>) { if ( /kern.log.rotate:/ || /log_rotate:/ ) { chop; $system = $_; $system =~ s/.*System /System /; } elsif ( /RSH INPUT COMMAND/ ) { my $s = $_; $s =~ s/.*RSH INPUT COMMAND is //; my @words = split(/[\s;]/,$s); my $cmd = $words[0]." ".$words[1]; if ( $words[0] ne "" ) { if ( not defined $rshusage{$cmd} ) { $rshusage{$cmd} = 1; } else { $rshusage{$cmd} += 1; } } } elsif ( /IN:console shell:/ ) { my $s = $_; $s =~ s/.*console shell://; my @words = split(/\s/,$s); my $cmd = $words[0]." ".$words[1]; if ( $words[0] ne "" ) { if ( not defined $consusage{$cmd} ) { $consusage{$cmd} = 1; } else { $consusage{$cmd} += 1; } } } elsif ( /Java_Thread.*:API:in:/ && ! /relog syslog/ ) { chop; my $api = $_; $api =~ s/[^<]*<//; $api =~ s/\/?>.*//; if ( not defined $apiusage{"Java-$api"} ) { $apiusage{"Java-$api"} = 1; } else { $apiusage{"Java-$api"} += 1; } } elsif ( /:API:in:/ && ! /relog syslog/ ) { chop; my $api = $_; $api =~ s/.*\/admin\'><//; $api =~ s/.*version="..."><//; $api =~ s/\/?>.*//; if ( not defined $apiusage{$api} ) { $apiusage{$api} = 1; } else { $apiusage{$api} += 1; } } } } if ( $system ne "" ) { print("$system\n"); } foreach $key ( sort { $rshusage{$b} <=> $rshusage{$a} } keys %rshusage ) { print("count=$rshusage{$key} rsh=$key\n"); } foreach $key ( sort { $consusage{$b} <=> $consusage{$a} } keys %consusage ) { print("count=$consusage{$key} cons=$key\n"); } foreach $key ( sort { $apiusage{$b} <=> $apiusage{$a} } keys %apiusage ) { print("count=$apiusage{$key} api=$key\n"); } exit($anyerr);

1 0

Geschäfts-Vorschlag!
by gooman1＠virgilio.it 24 May '06

24 May '06

Geschäfts-Vorschlag! Von:joy Gooman Email:joygooman@netscape.net Sehr geehrte Damen u. Herren, Geschäfts-Vorschlag! Sicher sind Sie verwundert, diese Nachricht von jemandem zu erhalten, den sie nicht personlich kennen. Der Grund weshalb ich mich an Sie wende ist das ich Simon Muzenda in, der erstgeborene Sohn von Azabeya Zulue, einem der bekanntesten schwarzen Farmer in Zimbabwe. Er wurde vor kurzem im Laufe des Landstreites in meinem Land ermordet. Ich erhielt Ihre Adresse durch das Interne und habe mich entschieden mich an Sie zu wenden. Bevor mein Vater starb, nahm er mich mit nach Johannesburg um dort einen Betrag von 9,5 Millionen US$ (Neun Millionen funfhunderttausend US Dollar) bei einer privaten Sicherheitsfirma zu deponieren. Er hat die drohende Gefahr geahnt und daher diesen Betrag in einer Kassette dort hinterlegt, die er als normales Wertgut deklarierte um keinen Verdacht zu erwecken. Die Kosten für die Hinterlegung gering zu halten. Niemand weiss also von dem Bargeld in dieser Kassette. Ursprunglich war dieser Betrag für neue Maschinen und Chemikalien für seine Farm gedacht, ausserdem wollte er neues Farmland in Swaziland erwerben. Das Landproblem entstand als der Präsident von Zimbabwe, Mr. Robert Mugabe, seine neue Landreform durchsetzte bei der nur die reichen weissen Farmer und einige wenige schwarze Farmer Vorteile verschafft wurden, für alle anderen war die Existenz nun bedroht. Daraus resultierten dann schlielich die Unruhen die sich ausbreiteten und denen viele Menschen zum Opfer fielen und ihr Leben lassen mussten. Leider ist mein Vater ebenfalls eines dieser Opfer das sein Leben verlor. Vor diesem Hintergrund bin ich mit der Familie unter lebensgefährlichen Umständen aus Zimbabwe nach Holland geflohen, hier haben wir politisches Asyl beantragt. Das in Sudafrika zuruckgelassene Geld wollen wir nun der Sicherheit wegen auf ein Konto hier bertragen. Das Gesetz in Holland verbietet es aber Menschen die politisches Asyl beantragt haben während dieses Verfahrens ein Konto zu erschaffnen oder irgendwelche Transfers die über die hollandische Grenze hinausgehen abzuwickeln. Als der erstgeborene Sohn bin ich nun für meine ganze Familie verantwortlich und habe die Rolle meines Vaters als Bewacher und Beschitzer ubernommen. Nun stehe ich vor dem Problem dieses Geld ohne Wissen der afrikanischen Regierung hierher zu transferieren, ansonsten wurde man uns den gesamten Betrag enteignen, dieses Geld ist aber alles das uns noch geblieben ist. Die Südafrikanische Regierung unterstutzt wohl die Regierung Zimbabwes, so dass auch dort nichts von meinem Vorhaben bekannt werden darf. Die Zukunftsplane beider Länder sind wohl genauso ähnlich wie es deren politische Vergangenheit ist.Als Geschäftsmann suche ich nun nach einem Partner dem ich voll und ganz vertrauen kann, dem ich meine und auch die Zukunft meiner ganzen Familie anvertrauen kann. Ich möchte Sie wissen lassen, dass mein Plan völlig ohne Risiko ist, falls Sie mir und meiner Familie helfen wollen. Alles worum ich Sie bitte, ist eine Vereinbarung mit der hollandischen Niederlassung der Sicherheitsfirma zu treffen, das hinterlegte Wertgut auszuhändigen. Ich meinerseits habe bereits Anweisung gegeben die Kassette von Sudafrika nach Holland zu senden. Vorher allerdings müssen noch einige wichtige Formalitäten erledigt werden, wie die Änderung des Begunstigten an diesem Wertgut. Weiterhin habe Ich vor diese Geld nach Erhalt möglichst gut und gewinnbringend zu investieren. Ich möchte Ihnen zwei Vorschläge unterbreiten.Erstens biete ich Ihnen einen Teil der Gesamtsumme an, wenn Sie bereit, Ihr eigenes Konto für diese Transaktion zur Verfugung zu stellen.Oder aber Sie sind an einer Partnerschaft mit mir interessiert um diese Summe profitabel in Ihrem Land zu investieren.Egal welcher Vorschlag Ihnen mehr zusagt, zögern Sie nicht mir Ihre Entscheidung mitzuteilen. Für alle entstehenden Unkosten habe ich 5% des Gesamtbetrages ingeplant. Sollten Sie nicht an einer Partnerschaft mit mir interessiert sein, biete ich Ihnen 25% des Betrages an und werde die verbleibenden 70% für meine Investitionen in Ihrem Land nutzen.Sie können mich jederzeit unter dieser e-Mail Adresse erreichen: (joygooman(a)netscape.net ) Ich bitte Sie jedoch um Ihre absolute Verschwiegenheit in dieser Angelegenheit Dritten gegenuber. Gott schutze Sie! Hochachtungsvoll Ihr ergebene, Dr. Joy Gooman joygooman(a)netscape.net

1 0

RE: downgrading the firmware on NetApp drives
by Matti Ryymin 24 May '06

24 May '06

In maintenance mode you'll find the commands label wipe <diskid> and label makespare <diskid> Those two commands given in this order should help you to get the disk recognized by your version of ontap. -Matti- _____ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Glenn Walker Sent: 24. toukokuuta 2006 6:23 To: Nathan G. Mitchell; George, Andrew; toasters(a)mathworks.com Subject: RE: downgrading the firmware on NetApp drives Label erase 7.54 is the command if I recall. My recommendation is to call NetApp support and have them walk you through it. The BEST course of action is to have the drive with the 'bad' label replaced via RMA. Glenn _____ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Nathan G. Mitchell Sent: Tuesday, May 23, 2006 10:29 PM To: George, Andrew; toasters(a)mathworks.com Subject: RE: downgrading the firmware on NetApp drives I wish the old machine still existed so that I could zero the old drive on that machine. That would sure help! Even in priv set diag I don't see the disk_erase_label command. The bad drive is 7.54. What would be the syntax for the command and what priv would I have to use to execute it? I hope I don't do something horrible and erase all the disklabels or something. Am I looking in the wrong place? How do I use the "ok" at the boot prompt? -- nate _____ From: George, Andrew [mailto:georgea@anz.com] Sent: Tuesday, May 23, 2006 9:20 PM To: Nathan G. Mitchell; toasters(a)mathworks.com Subject: RE: downgrading the firmware on NetApp drives Hi, Thats not a firmware problem thats the disk label. Essentially the disk was removed from a filer running a later version of OnTap so the version of OnTap in the filer thats trying to read it can't understand it. Theres two possible ways of fixing it (that I know of, one of the gurus might no a better way) 1) Put the disk back in the old system (or a system running a later version of OnTap) and then zero the disk 2) Reboot the filer and use the label erase command (I might be rmisrmembering the actual command..it's documented on Now) which is a command from the Ok prompt Andrew _____ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Nathan G. Mitchell Sent: Wednesday, 24 May 2006 10:10 AM To: toasters(a)mathworks.com Subject: downgrading the firmware on NetApp drives I found a 36GB NetApp drive for my f740 with FC9 shelves and when I put it in the machine, it said: Tue May 23 19:14:07 EDT [raid.assim.disk.badlabelversion:error]: The label on disk 7.54 (S/N 3CD0FN3X000021098HUD) is a newer version than that supported by this software. Either remove the disk or upgrade the system software. Of course, the disk_fw_update command didn't work because the versio of the firmware is NEWER than what's supported by my OS (Data Ontap 6.4.4p7). How does one go aboot DOWNGRADING the firmware on a NetApp drive? -- nate

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters