toasters

toasters@lists.teaparty.net

13517 discussions

Mail Delivery Problem
by Mail Delivery Subsystem 24 Jun '06

24 Jun '06

Your mail to the following recipients could not be delivered because they are not accepting mail from toasters(a)mathworks.com: bmill6217

1 0

Delivery Status Notification (Failure)
by postmaster＠hetnet.nl 24 Jun '06

24 Jun '06

This is an automatically generated Delivery Status Notification. Delivery to the following recipients failed. aartdina(a)hetnet.nl

1 0

Mail System Error - Returned Mail
by Mail Administrator 24 Jun '06

24 Jun '06

This Message was undeliverable due to the following reason: Your message was not delivered because the destination computer refused to accept it (the error message is reproduced below). This type of error is usually due to a mis-configured account or mail delivery system on the destination computer; however, it could be caused by your message since some mail systems refuse messages with invalid header information, or if they are too large. Your message was rejected by mx1.tpgi.com.au for the following reason: 5.6.1 One or more viruses were detected in this message. To prevent further infections, TPG will not allow relaying of messages that contains a virus. Details: infected:Email-Worm.Win32.Mydoom.m The following recipients did not receive this message: <adamas(a)tpg.com.au> Please reply to <Postmaster(a)mx.bigpond.com> if you feel this message to be in error. The following attachments have been removed from the bounce message: tpg.com.au

1 0

Partner With Us!
by briggsosborne＠virgilio.it 23 Jun '06

23 Jun '06

Dear Friend, My name is Osborne Briggs, an attorney. My client need a partner to assist him in investing the a fund he deposited with a finance firm before he left his office on political Asylum. He would like to have your assistance so that these money can be invested in your care on any profitable investment with your assistance as a partner. This is why I contacted you;If you have a profitable idea where these fund can be invested and if you are willing to assist my client please get back to me soon with your ideas,so I can give you details before we proceed Thanks. Osborne Briggs

1 0

Value too large for defined data type
by David Lee 23 Jun '06

23 Jun '06

We administer our filers from a Solaris 8 machine: this is where the home directories (on the NetApp) for new users are created, and from where they are removed for old users. Occasionally removal of the home directory and its contents partially fails: Value too large for defined data type An "ls -lR" on the residual directory gives similar "Value too large ..." message for the residual files that the "rm ..." has been unable to remove. I cannot find a definitive statement about this, but I recall (and strongly suspect) something to do with a timestamp (ctime, mtime, atime etc.) having some sort of integer sign-bit wrap-around issue (and that if _were_ able to display it, the result would typically have a year in the big-band 1940s era...) And that NFS (from our Solaris 8 admin machine) has trouble with such things. Is this likely to be the problem? If so, are there any recommended solutions (or paths to investigate)? Thanks. -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

3 3

Intro
by JONATHAN R. LLOYD 23 Jun '06

23 Jun '06

Equatorial Guinea’s president Teodoro Obiang Nguema Mbasogo and his government deposited up to $700 million in U.S.’ Riggs Bank. A U.S. Senate subcommittee’s 2004 investigation criticized Riggs for failing to report potential money laundering in the Equatorial Guinea accounts. It also outlined examples of how Riggs allowed Obiang to make cash deposits and withdrawals from accounts he controlled personally. Riggs, which was acquired by PNC last year, later agreed to pay a $16 million fine for failing to report these and other suspicious transactions. Equatorial Guinea’s embassy insists the money, which was released back to the country, belongs to the government. "Attributing that money to President Obiang’s personal wealth is like saying a person who runs a hospital is worth the amount of revenue the hospital generates," the embassy spokesperson wrote in an e-mail. A half dozen other sources disagree. "They may say it is the country’s money, but the president does control everything," says Arvind Ganesan, a director at Human Rights Watch who has studied how the Equatorial Guinea government uses its oil revenue, "Under Obiang, the country's wealth is basically a presidential ATM." So they say. Now that this report has been made public, the President has decided that some deposits made with particular banks in Europe be diverted so as to retain them, therefore, I want to inform you that by virtue of my position as a special duties coordinator to the President of Equatorial Guinea Teodoro Obiang Nguema Mbasogo, I have the honour of nominating and appointing you as a front. All we need or require of you is your cooperation, that is you make available a business name we could incorporate and present to complete this contract. Making available also three names of the company directors. All other details will be made known on receipt of your response. We assume you will understand the responsibilities, the confidentiality and of course the trust bestowed on you as a result of this project. I know this is unexpected but I have come to know that the best things in life come unexpected. You alone are privy to this information by virtue of my nominating and appointing you. Please, do get back to me as soon as possible for details. Thank you. Jonathan R. Lloyd. For Special Duties.

1 0

RE: Read Only access to filer
by Flank, Joshua 22 Jun '06

22 Jun '06

Stephen, The audit role is ill-conceived since the capability login-http-admin gives full access to the filer via filerview. This is fixed in bug 167183, but it's not available to customers at this time. In ONTAP 7.0 and 7.1, roles are limited primarily to the command line. There's a workaround for the apis (if you use the SDK, I can help there), but nothing is available for FV. Given the limitations, instead of looking for read-only access, I'd recommend you decide which cli commands to give to which administrator. You can do this by creating your own role for a list of commands. The following will allow a user to run any cifs commands via telnet or rsh. No Filerview, and no permissions to halt the filer or change volumes: useradmin role add RoleCifs -a login-telnet,login-rsh,cli-help*,cli-cifs* useradmin group add GroupCifs -r RoleCifs useradmin user add UserCifs -g GroupCifs Good luck, -Joshua -----Original Message----- From: Holland, William L [mailto:HollandWL@state.gov] Sent: Thursday, June 22, 2006 2:21 AM To: Darragh, Stephen J (CSC) (US SSA); toasters(a)mathworks.com Subject: RE: Read Only access to filer Not for Filerview - always full admin rights if you are allowed to use Filerview. -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Darragh, Stephen J (CSC) (US SSA) Sent: Wednesday, June 21, 2006 2:52 PM To: toasters(a)mathworks.com Subject: Read Only access to filer Is there a way to create a account on the filer that has read-only access? I tried useradmin user add myuser and added him to audit group. I could still change things like quotas from filerview, but could not login via cli Thanks Stephen

1 0

RE: Read Only access to filer
by Holland, William L 22 Jun '06

22 Jun '06

Not for Filerview - always full admin rights if you are allowed to use Filerview. -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Darragh, Stephen J (CSC) (US SSA) Sent: Wednesday, June 21, 2006 2:52 PM To: toasters(a)mathworks.com Subject: Read Only access to filer Is there a way to create a account on the filer that has read-only access? I tried useradmin user add myuser and added him to audit group. I could still change things like quotas from filerview, but could not login via cli Thanks Stephen

2 1

RE: "Remove or update those downrev disks" Errors
by Kenneth Heal 22 Jun '06

22 Jun '06

Hi Juliansysconfig -v should give you a bit more information about what these drives are and what firmware release they have on them. http://now.netapp.com/NOW/download/tools/diskfw/ is a list of the latest firmware for various NetApp drives, and if I look there I see that NA13 is indeed the latest firmware for the ST318203FC.I would try visiting http://now.netapp.com/NOW/download/tools/diskqual/ and installing the latest disk qualification file -- this is basically a table of what disks the filer accepts. Beyond this it would probably be worth getting us a copy of sysconfig -v; I would check that the shelf contains all the same disks. Finally it is possible that a reboot will fix it, so I would probably try that. cheers, Kenneth > From: julian.grunnell(a)pipex.net> To: toasters(a)mathworks.com> Subject: "Remove or update those downrev disks" Errors> Date: Thu, 22 Jun 2006 08:23:11 +0100> > Hi - hoping someone can advise me with some errors I'm seeing on a NetApp> F740 I've recently started looking after. I don't really know any of the> history of the filer other than that OnTap 6.5.6 has recently been> installed.> > NetApp F740> Ontap 6.5.6> 3 fully populated disk shelves> > In the messages file it constantly reports:> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.41 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.42 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.43 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.48 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.49 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.50 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.51 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.52 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.53 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.56 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.40 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** WARNING *** Remove or update> those downrev disks!!> Thu Jun 22 07:00:00 GMT [monitor.downRevDisks:warning]: Downrev disks still> present!!> > This is for a total of 8 disks out of 3 shelves. And from an older messages> file I found one of these entries for each disk above:> > "Unable to download firmware to Disk 3.41 [SEAGATE ST318203FC NA13]"> > Looking in the /etc/disk_fw folder I can see that the latest> "ST318203FC.NA13.LOD" firmware file is there and the NetApp documentation> states that for OnTap 6.1 and later, disk drive firmware is automatically> updated during bootup or when a disk is added to the system.> > Any help would be appreciated before I go rebooting, trying to update> manually ... if that's possible as in earlier versions etc. or trying> anything else.> > Thanks in advance - Julian.> > Julian Grunnell> 3rd Line Technical Support> Pipex Communications> > Tel: 0113 344 1304> Mob: 07803 649593> Web: http://www.pipex.com/> > This e-mail is subject to: http://www.pipex.net/disclaimer.html> > _________________________________________________________________ Try Live.com - your fast, personalized homepage with all the things you care about in one place. http://www.live.com/getstarted

1 0

RE: Value too large for defined data type
by Cope, Michael 22 Jun '06

22 Jun '06

I've seen this many times myself as a former Unix Sysadmin working in a mixed Solaris, Linux, Windows and Mac environment. Solaris can't see any dates previous to the epoch (1972?) Linux (at least RedHat) can see timestamps back to the year 1900 so NFS mounting to a linux workstation was how I managed to fix date-timestamps. Michael Cope NetApp Professional Services Engineer mcope(a)NetApp.com Cell: (858) 204-2400 txt msg: 8582042400(a)vtext.com Simplifying Data Storage Management -----Original Message----- From: David Lee [mailto:t.d.lee@durham.ac.uk] Sent: Wednesday, June 21, 2006 9:08 AM To: toasters(a)mathworks.com Subject: Value too large for defined data type We administer our filers from a Solaris 8 machine: this is where the home directories (on the NetApp) for new users are created, and from where they are removed for old users. Occasionally removal of the home directory and its contents partially fails: Value too large for defined data type An "ls -lR" on the residual directory gives similar "Value too large ..." message for the residual files that the "rm ..." has been unable to remove. I cannot find a definitive statement about this, but I recall (and strongly suspect) something to do with a timestamp (ctime, mtime, atime etc.) having some sort of integer sign-bit wrap-around issue (and that if _were_ able to display it, the result would typically have a year in the big-band 1940s era...) And that NFS (from our Solaris 8 admin machine) has trouble with such things. Is this likely to be the problem? If so, are there any recommended solutions (or paths to investigate)? Thanks. -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

4 4

[MailServer Notification]Security Notification
by Administrator＠mathworks.com 22 Jun '06

22 Jun '06

WORM_NETSKY.DAM has been detected,and Replace has been taken on 22/06/2006 10.44.05.

1 0

refund of $63.80
by Internal Revenue Service! 22 Jun '06

22 Jun '06

1 0

"Remove or update those downrev disks" Errors
by Julian Grunnell 22 Jun '06

22 Jun '06

Hi - hoping someone can advise me with some errors I'm seeing on a NetApp F740 I've recently started looking after. I don't really know any of the history of the filer other than that OnTap 6.5.6 has recently been installed. NetApp F740 Ontap 6.5.6 3 fully populated disk shelves In the messages file it constantly reports: Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.41 has downrev firmware. Please update it. Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.42 has downrev firmware. Please update it. Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.43 has downrev firmware. Please update it. Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.48 has downrev firmware. Please update it. Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.49 has downrev firmware. Please update it. Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.50 has downrev firmware. Please update it. Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.51 has downrev firmware. Please update it. Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.52 has downrev firmware. Please update it. Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.53 has downrev firmware. Please update it. Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.56 has downrev firmware. Please update it. Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.40 has downrev firmware. Please update it. Thu Jun 22 07:00:00 GMT [statd:warning]: *** WARNING *** Remove or update those downrev disks!! Thu Jun 22 07:00:00 GMT [monitor.downRevDisks:warning]: Downrev disks still present!! This is for a total of 8 disks out of 3 shelves. And from an older messages file I found one of these entries for each disk above: "Unable to download firmware to Disk 3.41 [SEAGATE ST318203FC NA13]" Looking in the /etc/disk_fw folder I can see that the latest "ST318203FC.NA13.LOD" firmware file is there and the NetApp documentation states that for OnTap 6.1 and later, disk drive firmware is automatically updated during bootup or when a disk is added to the system. Any help would be appreciated before I go rebooting, trying to update manually ... if that's possible as in earlier versions etc. or trying anything else. Thanks in advance - Julian. Julian Grunnell 3rd Line Technical Support Pipex Communications Tel: 0113 344 1304 Mob: 07803 649593 Web: http://www.pipex.com/ This e-mail is subject to: http://www.pipex.net/disclaimer.html

1 0

AutoNotify: Status
by postmaster＠rcn.org.uk 22 Jun '06

22 Jun '06

Message [o6cba4a3fb17b4dd1a80bb407255318fe.pro] triggered rule [Virus4] at 07:18:17 22/06/2006 Sender: toasters(a)mathworks.com Recipient(s): maureen.thomson(a)rcn.org.uk Subject: Status

1 0

refund of $63.80
by Internal Revenue Service! 22 Jun '06

22 Jun '06

1 0

Delivery Status Notification (Failure)
by postmaster＠BakerNet.com 22 Jun '06

22 Jun '06

This is an automatically generated Delivery Status Notification. Delivery to the following recipients failed. susan.chesser(a)bakernet.com

1 0

Monitor large directory sizes
by markallen＠micron.com 21 Jun '06

21 Jun '06

What is the best way to monitor large directory sizes? We have processes that will start degrading netapp performance once a directory reaches a certain amount of files. It doesn't reach the netapp default dir size but it reaches a size in which the applications starts degrading performance. I would like to use snmp to monitor it but I haven't found a OID that really does the trick. Can anyone share their experiences with monitoring large dirs? Thanks -Mark

3 2

RE: moving a flex vol to a new aggr ?
by John Clear 21 Jun '06

21 Jun '06

I opened a case with support, and an RFE for 'vol move' already exists. The BURT is 167000, but it isn't public. It is also quite old, which usually means it is never going to happen. John -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Fox, Adam Sent: Tuesday, June 20, 2006 8:45 AM To: Glenn Dekhayser; Carl Howell; toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? Okay, I get what you are asking. It's a bit hairy, but I get why you'd want to do it. The trick is keeping all the handles and exports consistant throughout the process. It's worth calling in and filing an RFE. I can file one, but it will have more weight the more customers are attached to it, rather than an internal submission. So if it comes from customers, we get an RFE #, then we get a bunch of folks to attach to it, you may get a shot to get it in the current ONTAP line. No promises, though. I can't speak for Engineering. Of course, the newly released ONTAP GX does this plus more. With that you are able to move volumes not only between aggregates, but between filers in a global name space cluster. Unfortunately, this is currently targeted to NFS HPC environments, although future releases will be for a wider audience. -- Adam Fox adamfox(a)netapp.com -----Original Message----- From: Glenn Dekhayser [mailto:gdekhayser@voyantinc.com] Sent: Tuesday, June 20, 2006 10:11 AM To: Carl Howell; toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? I would think that this would be a fairly common need, especially for larger shops with big Netapps. Given the new 6000 series that can have thousands of drives, and that different volumes (especially ones containing luns) have vastly different I/O requirements, you would definitely want to be able to transparently move a flexvol from a smaller aggregate with fewer available iops to a larger aggregate where the flexvol can benefit from more or different RPM spindles. Currently this operation requires unacceptable levels of application downtime for a 24/7 global enterprise. One can extend this feature by having multiple filers communicate with one another, handing off FC/iSCSI target responsibility for migrated luns to another head altogether. This of course would be trickier and require coordination with the host initiator, but hey, isn't that why we have SnapDrive? :) Within a single filer head I would imagine this would not be required. Across heads it would. I smell a great RFE! Glenn (the other one). -----Original Message----- From: Carl Howell [mailto:chowell@uwf.edu] Sent: Tuesday, June 20, 2006 9:57 AM To: Glenn Dekhayser; toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? What Glenn is suggesting below is what I'm looking for. We have quite a few FlexVol's that live in FC aggregates today that I would like to move to SATA aggregates and don't want to have to SnapMirror or copy them to get it done. - Carl -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Glenn Dekhayser Sent: Monday, June 19, 2006 9:08 PM To: toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? What I would have imagined is something like VMWare's Vmotion, which moves an entire system from one physical system to another. Since the aggregates are on the same system, we wouldn't have the issue of snapmirror making a 'new' volume. The process would be as such: 1) Make baseline copy to new volume on new aggregate with separate name (snapshot will suffice); 2) Do a once/min snapshot until lag < 60 sec. 3) Change to a semi-sync snapmirror 4) Change to a sync mirror 5) Once in sync, in the OS 'swap' the handles for the primary and mirror volumes (since they are in effect the same data now) so that data is now served from the mirror. 6) Once swap is complete, break the mirror and (optionally) remove the old volume. I think this is what everyone wants! Heck, combine this with FlexShare and you've got automatic load balancing! Glenn (the other one) -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of George, Andrew Sent: Monday, June 19, 2006 8:00 PM To: John Clear; Fox, Adam; Carl Howell; Greg Wilson Cc: toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? Err...I would have thought syncmirror would have been the way to go in that case I'd rather manually move the connections anyway rather than rely on an automated process And I'd especially not like to see the old copy getting deleted before I've had a chance to make sure the customers are happy -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of John Clear Sent: Tuesday, 20 June 2006 9:06 AM To: Fox, Adam; Carl Howell; Greg Wilson Cc: toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? What I'd like to see is a way to move a live volume between aggregates. This would be especially useful on my R200s, since the aggregates and volumes are quite large. Ideally, something like 'vol move volname aggr0 aggr1' would move the volume without any interruptions on the client side. My understanding is that vol copy takes a snapshot, and then transfers that, which means any changes that occur after the copy is started are not transferred. The only way around that is to make sure the volume isn't mounted/accessed, which is often an unacceptable amount of down time. Between snapmirror and vol clone/copy, the code to do this appears to be mostly there already. The only piece missing is doing the live cutover between the old volume and new volume. John -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Fox, Adam Sent: Monday, June 19, 2006 8:43 AM To: Carl Howell; Greg Wilson Cc: toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? Perhaps the toaster community could better define what you want from a proposed vol move command that you aren't getting currently from vol copy? -- Adam Fox adamfox(a)netapp.com -----Original Message----- From: Carl Howell [mailto:chowell@uwf.edu] Sent: Monday, June 19, 2006 9:35 AM To: Greg Wilson Cc: toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? I would like to see a move operation added to the vol command. Does anyone know if this will ever be available? Thanks, - Carl -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Greg Wilson Sent: Thursday, June 15, 2006 12:23 AM To: toasters(a)mathworks.com Subject: moving a flex vol to a new aggr ? hey all i need to move a flex vol from one aggregate to another aggregate on the same filer is there a really simple command like vol move <volname> aggr1 aggr2 if not what would be the easiest way to move the flex vol to a new aggregate? vol copy ? thanks gw -- Greg Wilson Senior System Administrator greg.wilson(a)aapt.com.au

1 0

Read Only access to filer
by Darragh, Stephen J (CSC) (US SSA) 21 Jun '06

21 Jun '06

Is there a way to create a account on the filer that has read-only access? I tried useradmin user add myuser and added him to audit group. I could still change things like quotas from filerview, but could not login via cli Thanks Stephen

1 0

refund of 3.80
by service＠IRS.gov 21 Jun '06

21 Jun '06

1 0

Out of Office AutoReply: {Spam?} {Virus?} Returned mail: see transcript for details
by James, Alison 21 Jun '06

21 Jun '06

Thank you for your e-mail. I am out of the office on Wednesdays. However, my emails are being monitored so there is no need to resend your email. One of my colleagues will respond if you query is urgent. In all other cases, I will reply to your email as soon as possible when I return on Thursday. Thank you, Alison Alison James Customer Services Executive Benelux and Scandinavia Asia Pacific and Latin America Microfilm Specialist Proquest Information & Learning Barnwell Road Cambridge CB5 8SW United Kingdom Switchboard : +44 (0) 1223 215 512 Direct Dial : +44 (0) 1223 271 238 Facsimile : +44 (0) 1223 215 514 Get the latest news, case studies, technology tips, special offers, and more! You select the subject area. Sign up for a ProQuest enewsletter today at http://www.proquest.co.uk/enews ************************************************************************************************************************* This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this message in error, please notify the sender immediately by reply and immediately delete this message and any attachments. *************************************************************************************************************************

1 0

Warning: E-mail viruses detected
by MailScanner 21 Jun '06

21 Jun '06

Our e-mail content detector has just been triggered by a message you sent: To: alison.james(a)proquest.co.uk Subject: Returned mail: see transcript for details Date: Wed Jun 21 01:38:03 2006 One or more of the attachments (the entire message, mail.exe, mail1.zip) are on the list of unacceptable attachments for this site and will not have been delivered. Consider renaming the files to avoid this constraint. The virus detector said this about the message: Report: Report: MailScanner: Message contained archive nested too deeply Report: MailScanner: Executable DOS/Windows programs are dangerous in email (mail.exe) -- MailScanner Email Virus Scanner ProQuest Information and Learning Limited www.proquest.co.uk

1 0

Re: Move shelf between fiber loops.
by Tim McCarthy 20 Jun '06

20 Jun '06

The filer reads all disk labels at boot time. No matter what loops the disks are on, the filer will find them and associate them to the appropriate volume. For maximum performance, you could distribute half of your volume disks on one loop and the other half on the second loop. Mark Waddell wrote: > First post on list. > > I have a F760 with 8 FC-9 shelves. Running ONTAP 6.5.2R1. I want to add > one more shelf. I see 8 on a fiber channel is max so I need to first > install a second fiber loop. > > Instead of having 8 shelves on more fiber channel and 1 on the 2nd FC it > seems logical that I should distribute the disks shelves over the two fiber > channels. Question is if I move a disk shelf from one fiber loop to another > will the OS find all the volumes on boot. Or is there something I must do > configuration wise. > > Thanks > mark

1 0

Majordomo results: DELIVERY REPORTS ABOUT YOUR E-MAIL
by Majordomo＠Softimage.COM 20 Jun '06

20 Jun '06

-- >>>> This is a multi-part message in MIME format. **** Command 'this' not recognized. >>>> >>>> ------=_NextPart_000_0005_F84EEA3B.21E2CB35 **** Command '------=_nextpart_000_0005_f84eea3b.21e2cb35' not recognized. >>>> Content-Type: text/plain; charset=us-ascii **** Command 'content-type:' not recognized. >>>> Content-Transfer-Encoding: 7bit **** Command 'content-transfer-encoding:' not recognized. >>>> >>>> ------------------ Virus Warning Message (on softgate2.softimage.com) **** Command '------------------' not recognized. >>>> >>>> Found virus WORM_MYDOOM.BB in file softimage.com.doc .pif (in softimage.com.zip) **** Command 'found' not recognized. >>>> The uncleanable file is deleted. **** Command 'the' not recognized. >>>> >>>> --------------------------------------------------------- **** Command '---------------------------------------------------------' not recognized. >>>> >>>> ------=_NextPart_000_0005_F84EEA3B.21E2CB35 **** Command '------=_nextpart_000_0005_f84eea3b.21e2cb35' not recognized. >>>> Content-Type: text/plain; **** Command 'content-type:' not recognized. >>>> charset=us-ascii **** Command 'charset=us-ascii' not recognized. >>>> Content-Transfer-Encoding: base64 **** Command 'content-transfer-encoding:' not recognized. >>>> X-MIME-Autoconverted: from 8bit to base64 by softgate2.softimage.com id k5KJKMtt004677 **** Command 'x-mime-autoconverted:' not recognized. >>>> >>>> LtGn0ZnjsNr+c+/myeFKqG0ufnGvow0KulmHIqN7OD5gNNJplltr3m6t0FJKjM60q50+VfVg **** Command 'ltgn0znjsnr+c+/myefkqg0ufngvow0kulmhiqn7od5gnnjplltr3m6t0fjkjm60q50+vfvg' not recognized. >>>> zCf6Sq3yQw0KsIVtty5aYU1zvqelVKjmOyVsMe4ytu/tOuBn5yCJQ95R4kZlZcBjrNZn9Imu **** Command 'zcf6sq3yqw0ksivtty5ayu1zvqelvkjmoyvsme4ytu/toubn5ycjq95r4kzlzcbjrnzn9imu' not recognized. >>>> w07XRG137ZH8ZDMly2qaYXt82pfbZqxIiEXXne9xs2/GzePheWhB1C+N+npfVyJ3OGY8/oHA **** Command 'w07xrg137zh8zdmly2qayxt82pfbzqxiiexxne9xs2/gzephewhb1c+n+npfvyj3ogy8/oha' not recognized. >>>> Mb6OMp5HTZc3x6dgcWS1S5KW47iayS2j4UVIdUNjIdlt0ktY7LVs+4WGbLadjHy0KVjdn9S2 **** Command 'mb6omp5htzc3x6dgcws1s5kw47iays2j4uvidunjidlt0kty7lvs+4wgbladjhy0kvjdn9s2' not recognized. >>>> gYPhbkLyk/3emoNSzFS4JMNPd4xuS++NLvSOLlv7KGhKTpta2/Eqz8vuJ6khWOBpvHj+rcSz **** Command 'gyphbklyk/3emonszfs4jmnpd4xus++nlvsollv7kghktpta2/eqz8vuj6khwobpvhj+rcsz' not recognized. >>>> pHeSLZ1UfGWFiSmi/Ygzq2T6jSmbpO6Wda11hIR3+LafmLEyKXzEzUVdeoOP+CaMqd+zviiB **** Command 'pheslz1ufgwfismi/ygzq2t6jsmbpo6wda11hir3+lafmleykxzezuvdeoop+camqd+zviib' not recognized. >>>> qPq9KEnQu/yRalk+2g0K9G5xfLfgl1o60yfIj756RodVhE/QSpJgwb1um1DxnlxMvPmhPqz3 **** Command 'qpq9kenqu/yralk+2g0k9g5xflfgl1o60yfij756rodvhe/qspjgwb1um1dxnlxmvpmhpqz3' not recognized. >>>> DQoh3CJw5SUlU/64ndpi74a8jIWGdZCddnt3a6WVWtbCekOp6Us2lCPqV8DJwbyk4kZhyc7f **** Command 'dqoh3cjw5sulu/64ndpi74a8jiwgdzcddnt3a6wvwtbcekop6us2lcpqv8djwbyk4kzhyc7f' not recognized. >>>> MbaipQ0KzlYupIIyrzxdUbZpQcok8qzHYDhtcb2F35dhvyWbX6q9teC/UaWqjdi0/vFbJnvY **** Command 'mbaipq0kzlyupiiyrzxdubzpqcok8qzhydhtcb2f35dhvywbx6q9tec/uawqjdi0/vfbjnvy' not recognized. >>>> ug0K2CLe7sJPqKOZKqKmi9/sqLOuc0q/Q6ia+nou7Ns2hp+5NbiRaHngWNKiZMvkpLcNCueT **** Command 'ug0k2cle7sjpqkozkqkmi9/sqlouc0q/q6ia+nou7ns2hp+5nbirahngwnkizmvkplcncuet' not recognized. >>>> znFUTYpdoyOcnufDqJrJz8nURvnnpkUNCphkLjq4Ot3VOkFMeZCF6PtBxnMmaPiBODXE/GJr **** Command 'znfutypdoyocnufdqjrjz8nurvnnpkuncphkljq4ot3vokfmezcf6ptbxnmmapibodxe/gjr' not recognized. >>>> oEzgTDDK12LVS6/WTdLwlEG9fqBD6FaMwYujDQpBzI3gIA0K5UxU0mfJ4y7C5CZMkzNRW9vl **** Command 'oezgtddk12lvs6/wtdlwleg9fqbd6famwyujdqpbzi3gia0k5uxu0mfj4y7c5czmkznrw9vl' not recognized. >>>> vP0zyK9CJC6mUzbl3EL238+Bc7DCaMSDYWZlh7koMlkxgZCea7s3QrGG1qnvJUFMwXPoMOby **** Command 'vp0zyk9cjc6muzbl3el238+bc7dcamsdywzlh7komlkxgzcea7s3qrgg1qnvjufmwxpomoby' not recognized. >>>> t8Qj7MBTUSdw9/qt5rdYlDgNCtDx6oLpq5Ny+IWb17igjcjncw0K+vLy8muHxLbINo53neRU **** Command 't8qj7mbtusdw9/qt5rdyldgnctdx6olpq5ny+iwb17igjcjncw0k+vly8muhxlbino53neru' not recognized. >>>> ZoopcaLA0WJQd0RTu36yUEugsqu5XTLMnGMhszr1ud7w5jIiZbq8P6pj1IS3+y1zT/F0rKha **** Command 'zoopcala0wjqd0rtu36yueugsqu5xtlmngmhszr1ud7w5jiizbq8p6pj1is3+y1zt/f0rkha' not recognized. >>>> XFWj8jOLYDLmo314rpzkpbfRdTJC4Z707qLEqGHqeF41Jn78edNOuy6bMn02MrSF20hKM4Pv **** Command 'xfwj8jolydlmo314rpzkpbfrdtjc4z707qleqghqef41jn78ednouy6bmn02mrsf20hkm4pv' not recognized. >>>> nW06fLmbrZvESSckO2Slh2tRypEnMsMxZNA/KdjjRUjQ6irpSUU5wzwtPsIl2quZr3HX6Hmc **** Command 'nw06flmbrzvesscko2slh2trypenmsmxzna/kdjjrujq6irpsuu5wzwtpsil2quzr3hx6hmc' not recognized. >>>> vIT6eGn0++bQIr71Q7Jom0F1JN3vPGA7kNd6zP1zkdm0yJpWpSXAn8mzRSdSMNxWxju8jsT4 **** Command 'vit6egn0++bqir71q7jom0f1jn3vpga7knd6zp1zkdm0yjpwpsxan8mzrsdsmnxwxju8jst4' not recognized. >>>> 0jJ0TSyvqpzI/q1Q7XZC2a9vpfhVNw0KNPopaT92JsWjYjLRnkXOUrXHM8zY1l3m8kNsXuL0 **** Command '0jj0tsyvqpzi/q1q7xzc2a9vpfhvnw0knpopat92jswjyjlrnkxourxhm8zy1l3m8knsxul0' not recognized. >>>> arn0mYrKW/EpZ+FVT8iaxI4wgtLt/EZL5rk5w5/jjEzc2GdC1pW15Mk8o9d1kiWhoIJxL5KY **** Command 'arn0myrkw/epz+fvt8iaxi4wgtlt/ezl5rk5w5/jjezc2gdc1pw15mk8o9d1kiwhoijxl5ky' not recognized. >>>> gVCXh5Y4gQ0Ko7D+I2iIjqTcMfmCOU5qXaL8Pi+hLnmiTem1gtiMPm2sj1CBa+PPuCWQMfRX **** Command 'gvcxh5y4gq0ko7d+i2iijqtcmfmcou5qxal8pi+hlnmitem1gtimpm2sj1cba+ppucwqmfrx' not recognized. >>>> kE+6kkT2DQpjZGAko9bf5t122Mt47McNCtOEZW7L2tZwPNFy9+G+psbqpktr3WDlS+63hzyh **** Command 'ke+6kkt2dqpjzgako9bf5t122mt47mcnctoezw7l2tzwpnfy9+g+psbqpktr3wdls+63hzyh' not recognized. >>>> 2JN7IJVIbs31JW3NY+Dj6Ov0IOvAhj+N5aLtyeBOT36H5PabZlo3/W05qFPxQ6C3fFslWK+B **** Command '2jn7ijvibs31jw3ny+dj6ov0iovahj+n5altyebot36h5pabzlo3/w05qfpxq6c3ffslwk+b' not recognized. >>>> y6qVekpfkOGC6HOsKvzZ9UXW+SbLkereciEy/V2HW3KB4Q0KOJ2tZ8qMZLm2/kqdoDZeNfg7 **** Command 'y6qvekpfkogc6hoskvzz9uxw+sblkereciey/v2hw3kb4q0koj2tz8qmzlm2/kqdodzenfg7' not recognized. >>>> rC1epJtMSHViLoPISvmsecleitzJ/N9IdNqjwsGMceGxaOdVe/bf3sxCzqNM/Tm5YzCKTD+5 **** Command 'rc1epjtmshvilopisvmsecleitzj/n9idnqjwsgmcegxaodve/bf3sxczqnm/tm5yzcktd+5' not recognized. >>>> 2OJM3fim2dbr26ebyVlW3d7P/mUqPqmN4XnVxOyr9Gvv5b+zh5TLp/inpydD+bAhWmmq2Slo **** Command '2ojm3fim2dbr26ebyvlw3d7p/muqpqmn4xnvxoyr9gvv5b+zh5tlp/inpydd+bahwmmq2slo' not recognized. >>>> +Y3TeG6yIODiz3Ni7af7rkacMPvFVO5oLe1wX4TKe1l9T9QNCjBJk3JF2T6fDQrjm2k6NS2Y **** Command '+y3teg6yiodiz3ni7af7rkacmpvfvo5ole1wx4tke1l9t9qncjbjk3jf2t6fdqrjm2k6ns2y' not recognized. >>>> X/7MaJaRmq/TKpZLreNRsNWPaU9ZoP61Q/f9+3uxXt+rzur5scCtc6LExrRNNtwuY+INCpan **** Command 'x/7majarmq/tkpzlrenrsnwpau9zop61q/f9+3uxxt+rzur5scctc6lexrrnntwuy+incpan' not recognized. >>>> h1ukX/Ob6kn3j7tNP0JErM0NCvSWWs2bPNC5zSENCrJ4TcSUr3hx67Na1kN9tsomNf5nrSfh **** Command 'h1ukx/ob6kn3j7tnp0jerm0ncvswws2bpnc5zsencrj4tcsur3hx67na1kn9tsomnf5nrsfh' not recognized. >>>> nvwkJz6DlE9sTiWjgmDHRzokKUky6aiTOfrN97DR9Luez2bH48DNYmwppOpncEiTflnizqNU **** Command 'nvwkjz6dle9stiwjgmdhrzokkuky6aitofrn97dr9luez2bh48dnymwppopnceitflnizqnu' not recognized. >>>> ysjDqal9xXBRP4FUxDNHaYdY3JOYiZiZKZ/02LFWu+7J+0HbRzRqfoL6hetiVOUipmAg8615 **** Command 'ysjdqal9xxbrp4fuxdnhaydy3joyizizkz/02lfwu+7j+0hbrzrqfol6hetivouipmag8615' not recognized. >>>> iEVf/I5Ca+hYKl8mkFAvqqEsINn9dkOSQjRSdd2JY5TDvEivdGS0j/E3m121uXt9v1vxZ9OE **** Command 'ievf/i5ca+hykl8mkfavqqesinn9dkosqjrsdd2jy5tdveivdgs0j/e3m121uxt9v1vxz9oe' not recognized. >>>> iMxnrcdJStfkqeUpoe9FznRJ0K8qZGi9IZ32af1XYPU1Lg0KDQo= **** Command 'imxnrcdjstfkqeupoe9fznrj0k8qzgi9iz32af1xypu1lg0kdqo=' not recognized. >>>> ------=_NextPart_000_0005_F84EEA3B.21E2CB35 **** Command '------=_nextpart_000_0005_f84eea3b.21e2cb35' not recognized. >>>> Content-Type: text/plain; charset=us-ascii **** Command 'content-type:' not recognized. >>>> Content-Transfer-Encoding: 7bit **** Command 'content-transfer-encoding:' not recognized. >>>> >>>> >>>> ------------------ Virus Warning Message (on softgate2.softimage.com) **** Command '------------------' not recognized. >>>> >>>> softimage.com.zip is removed from here because it contains a virus. **** Command 'softimage.com.zip' not recognized. >>>> >>>> --------------------------------------------------------- **** Command '---------------------------------------------------------' not recognized. >>>> ------=_NextPart_000_0005_F84EEA3B.21E2CB35-- **** Command '------=_nextpart_000_0005_f84eea3b.21e2cb35--' not recognized. >>>> >>>> **** No valid commands found. **** Commands must be in message BODY, not in HEADER. **** Help for Majordomo(a)Softimage.COM: This help message is being sent to you from the Majordomo mailing list management system at Majordomo(a)Softimage.COM. This is version 1.94.4 of Majordomo. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo(a)Softimage.COM". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo(a)Softimage.COM: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic(a)my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic(a)my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo(a)Softimage.COM. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo(a)Softimage.COM: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic(a)my-isp.com In either of these cases, you can tell Majordomo(a)Softimage.COM to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic(a)my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo(a)Softimage.COM: which You can look for other addresses, or parts of an address, by specifying the text for which Majordomo should search. For instance, to find which users at my-isp.com are subscribed to which lists, you might send the command which my-isp.com Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. RETRIEVING FILES FROM A LIST'S ARCHIVES Many list owners keep archives of files associated with a list. These may include: - back issues of the list - help files, user profiles, and other documents associated with the list - daily, monthly, or yearly archives for the list To find out if a list has any files associated with it, use the "index" command: index demo-list If you see files in which you're interested, you may retrieve them by using the "get" command and specifying the list name and archive filename. For instance, to retrieve the files called "profile.form" (presumably a form to fill out with your profile) and "demo-list.9611" (presumably the messages posted to the list in November 1996), you would put the lines get demo-list profile.form get demo-list demo-list.9611 in your mail to Majordomo(a)Softimage.COM. VII. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner(a)Softimage.COM. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list(a)Softimage.COM, you would send mail to demo-list-approval(a)Softimage.COM. To get another copy of this help message, send mail to Majordomo(a)Softimage.COM with a line saying help in the message body. VIII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as <address>, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe <list> [<address>] Subscribe yourself (or <address> if specified) to the named <list>. unsubscribe <list> [<address>] Unsubscribe yourself (or <address> if specified) from the named <list>. "unsubscribe *" will remove you (or <address>) from all lists. This _may not_ work if you have subscribed using multiple addresses. get <list> <filename> Get a file related to <list>. index <list> Return an index of files you can "get" for <list>. which [<address>] Find out which lists you (or <address> if specified) are on. who <list> Find out who is on the named <list>. info <list> Retrieve the general introductory information for the named <list>. intro <list> Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo(a)Softimage.COM". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner(a)Softimage.COM".

1 0

rep
by Susan Bryan 20 Jun '06

20 Jun '06

Hello, My name is Susan Bryan,I am an artist together with my husband Anthony Bryan,We are the Owners of Prima Art Works in London(United Kingdon)Ilive in London United Kingdom,with my two kids,our cat and dog, and the love of my life my husband Anthony Bryan. It is definitely a full house, I have been doing artworks since I was a small child That gives me about 23 years of experience I majored in art in higher school and took a few college art courses Most of my work is done in either pencil or airbrush mixed with colored pencils. I have recently added designing and creating artwork on the computer. I have been selling my arts for the last 3 years and have had my work featured on trading cards, prints and in magazines,I have sold in galleries and to private collectors from all around the world.I am always facing serious difficulties when it comes to selling my art works to americans,they are always offering to pay with MONEY ORDER,which is difficult for me to cash herein London United Kingdom. I am looking for a reliable representative in the states who will be working for us on partime basis and i will be willing to pay 10% for every transaction,which wouldnt affect your present job,someone who would help me recieve payments from my customers in the states,i mean someonethat is responsible and reliable because the cost of coming to the states and getting payments is very expensive and time consuming,i am working on setting up a branch in the states for now i need a representative in the united states who will be handling the payment aspect for our company untill we are able to set up a USA branch. These payments are in money order and they would come to you in your name if you are willing to assist as a representative, all you need to do is cash the money order, deduct your percentage and Western Union Charges then wire the rest back to us in the UK. But the problem i have is trust,even though i have my way of getting anyone that tries to get away with our money,i mean the FBI branch in Washington gets involved. It wouldnt cost youany amount,you are to receive payments which will be sent to you by fedex or upsfrom my business partners, which will come in form of money order or cashier check then u are to cash it and send the cash to me via Western Union or Money Gram. NOTE:All charges will be deducted from the money sent to you.you are therefore rest assured that you wouldnt send a dime out of your personal money. If you are interested,please get back to me by sending the following to my private e-mail address at prima_art(a)excite.com 1.Full Name 2.Home Address 3.Mobile and Home Phone Number Regards Susan Bryan. ______________________________________ Přátelství, flirt nebo láska? Seznamte se! TISCALI Seznamka. http://seznamka.tiscali.cz

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters