toasters October 2009

toasters@lists.teaparty.net

30 participants
49 discussions

Netapp Contract / Support questions
by Rasta Surfer 20 Oct '09

20 Oct '09

We're a small shop a couple of FAS 3020's doing basic, NFS, CIFS, Snapdrive/SnapManager For SQL and Snapmirror. We are up for our contract renewal soon. I have been in the biz for quite a number of years and can remember back to amazing support from Netapp. I have found quite the opposite over the past two years. Most are problems with first addressing the case, usually it took a phone call. Then it gets to incompetence with their products, like SnapManager for SQL and Snapdrive. Cases went on forever, i always had to hound them for status, making it quite frustrating. The end result of most cases is me getting a note from some support manager at Netapp apologizing. I still like the products, just hate the support methods. What do you folks do? We of course want to upgrade when possible to keep up to date from bugs. We don't want to blow the bank though for their support if we can go somewhere else for better. tia for your thoughts, rsurfer

3 2

Re: I'm sorry -- egg all over my face! (was "RE: Thanks for Joining Tech OnTap!")
by Dave Minor 20 Oct '09

20 Oct '09

Delete Sent from my iPhone On Oct 19, 2009, at 11:18 AM, Kevin Davis <kdavis(a)mathworks.com> wrote: As someone who's run 10s of thousands of email systems, and spent a number of years working on preventing spam- this was pretty low on the stupid scale. I wouldn't spend too much time on the first two questions (I'm guessing the person responsible is suitably embarassed), or worrying about it too much, at all really, but submitting additions via a webapp that can sanity check things wouldn't hurt, and Its a great "give the interns something to do" project. Agreed. The number of messages was small-potatoes in the grand scheme of things. "delete" works just fine. And folks, let's hear it for NetApp responding from Dave Hitz's level to something like this; I hardly think we could expect the same from that other storage vendor should the same type of thing originate from their domain. Thanks, Dave, for responding so quickly and taking the time to explain. Now, can we get SMB2.x support built in to 8.0.x? ;) *------------------------------------------*-----------------------* | Kevin Davis (UNIX/Storage Sysadmin) | Natick, Massachusetts | | 508.647.7660 | 01760-2098 | | mailto:kevin.davis@mathworks.com *-----------------------* | http://www.mathworks.com | | *------------------------------------------*-----------------------*

1 0

Linux/MySQL instances on VM/ESX
by Rob Borowicz 19 Oct '09

19 Oct '09

Howdy all, I'm new to the ESX arena and have been consuming CentOS instances on several ESX servers in house. These CentOS instances are an appliance image my company makes that runs a potentially busy MySQL db. We have so far been using only locally attached disk, but I'm thinking filers rock using NFS to ESX host, and most probably there is a best practices guide published by Netapp. I no longer support filers and as such don't have a NOW account anymore, but am curious to how well filers support ESX datastore requirements. Could anybody advise me on what the standard practice is? Direct attach GigE links from the filer to the ESX host and run NFS? How many instances of MySQL can you get away with on an ESX host mounting filer volumes? TIA -Bob B.

2 1

Thanks for Joining Tech OnTap!
by NetApp 19 Oct '09

19 Oct '09

================================================================================= NetApp Tech OnTap ================================================================================= Dear Toasters, Thank you for joining the NetApp Tech OnTap program. You will begin to receive Tech OnTap communications in the next few weeks. In the meantime, I invite you to browse the articles, tips, and tools available in the Tech OnTap archive. http://www.netapp.com/us/communities/tech-ontap/archive/tot-archive.html?el… And - to thank you for your membership - here is your first "member-only" benefit: the latest Tech OnTap Magazine, where you can catch up on a collection of our best articles. http://media.netapp.com/documents/tot-spring09-magazine.pdf?elq=2076d26ef30… Welcome to Tech OnTap! Dave Hitz Founder and Executive Vice President NetApp ----------------------------------------------------------------- Go further, faster(TM) (c) 2009 NetApp http://app.communicate.netapp.com/e/er.aspx?s=1184&lid=13&elq=2076d26ef30e4… Privacy Policy http://app.communicate.netapp.com/e/er.aspx?s=1184&lid=14&elq=2076d26ef30e4… Unsubscribe http://www.netapp.com/us/forms/sp-update.html?ecid=CNTAP000000983586&ek=toa… Update My Profile http://www.netapp.com/us/forms/sp-manager.html?ecid=CNTAP000000983586&ek=to… Contact Us http://app.communicate.netapp.com/e/er.aspx?s=1184&lid=125&elq=2076d26ef30e… ----------------------------------------------------------------- 495 E. Java Drive, Sunnyvale, CA 94089 USA You are receiving this e-mail at toasters(a)mathworks.com because you joined Tech OnTap.

7 7

7.3.1 simulator missing domains info?
by Nick Bernstein 16 Oct '09

16 Oct '09

I'm looking at the statit output on a sim running 7.3.1 and I'm not seeing the Multiprocessor statistics that includes domain info - could anyone who's running 7.3.1 confirm that it either exists or has been removed? The sections I'm looking for normally look like this: nonCP rupt usec 3060.42 4240.52 2873.10 265.81 10441.64 idle 992661.59 986785.16 992467.14 982095.96 3954013.42 kahuna 0.00 0.00 0.00 16950.50 16951.39 network 0.00 0.00 4402.87 0.00 4402.87 storage 0.00 8609.49 0.00 0.00 8609.49 exempt 287.22 57.98 66.90 62.44 475.43 raid 3478.76 0.00 0.00 0.00 3478.76 target ... etc. Thanks! Nick

2 1

wafl realocate unable with snapshots
by Chaim Rieger 12 Oct '09

12 Oct '09

according to netapp, i can not do a reallocate if there are underlying snapshots, the issue is that the snapshots are for a large (3TB) oracle db, and will not be rotated off anytime soon. is there a way around this ? any ideas ?

2 1

Re: High CPU utilizations and file I/O
by Raj Patel 06 Oct '09

06 Oct '09

Thanks for all the advice - thanks to Romeo Theriaults awesome tool I'll run some stats over time and see how things look. I'll probably give Logicmonitor a quick look and see how it compares to DFM. Cheers, Raj. On 10/7/09, Kevin M. Parker <kevin(a)theparkerz.com> wrote: > Raj, > I'll share knowledge I've received specific to NFS environments (and > this may be specific to VMware over NFS - sorry I can't confirm). The > way I understand it is that clients start experiencing negative > performance after 20ms disk latency. I do not know if that same latency > applies to iSCSI traffic. > > As it relates to the disks making up your aggregates, I can offer the > following numbers as they relate to disk IOPS, which is also somewhat > related to the original request in this thread. Numbers below are the > IOPS that disk can sustain before experiencing a >= 20ms delay. > FC@10KRPM: 120IOPS > FC@15KRPM: 220IOPS > SATA: 40IOPS > > I had looked on NOW for this type info but did not come up w/anything > quickly - perhaps you could reach out to your SE. > > -/- > Kevin Parker > 919.521.8413 > http://theparkerz.com > Blackle.com - Saving energy one search at a time. > > > -----Original Message----- > From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] > On Behalf Of Raj Patel > Sent: Monday, October 05, 2009 12:59 AM > To: Romeo Theriault > Cc: Maxwell Reid; vera.lee(a)avagotech.com; Milazzo Giacomo; > toasters(a)mathworks.com > Subject: Re: High CPU utilizations and file I/O > > As a matter of interest how much latency is to much (I know, how many > angels can you fit on a pinhead) ? > > We've had a few DBA types come and comment on long SQL queue lengths > associated with disk i/o - the SQL luns are connected via iSCSI. > > As far as the end user is concerned performance seems fine for things > like SharePoint and CRM. Even Exchange. However a few apps with high > i/o (mail archiving to database and SCOM which seems to thrash the > database) do seem to suffer a little in terms of slow response time. > > Do people have tips for optimising iSCSI performance (targets are ESX > servers, Exchange on physical hardware and SQL on a mix of physical > and virtual servers) ? > > What key counters should I keep an eye on ? > > Fibre Channel is still prohibitively expensive plus 10GbE seems very > promising and more pervasive than a few years ago. > > Cheers, > Raj. > > On 10/3/09, Romeo Theriault <romeotheriault(a)gmail.com> wrote: >>> >>> I think everyone would be interested in the updated version! >>> >> >> Great! Ok, I'll put up the version that can also filter on aggregates > on >> Monday. I hadn't put it up earlier mainly because it takes a bit more > setup >> to get working. I used the netapp perl api to access the aggregate >> information so it also requires a user account with the appropriate > api >> permissions and the associated netapp perl api modules. I just haven't >> gotten around to figuring out if I can legally bundle the netapp perl >> modules and just generally putting it in a easily usable package for > the >> general public. I'll try to figure out the details on monday and see > what I >> can get out, with or without the netapp modules. >> >> -- >> Romeo Theriault >> System Administrator >> Information Technology Services >> >

1 0

VMware + (Linux) MySQL on NetApp
by Filip Sneppe 06 Oct '09

06 Oct '09

Hi, I am wondering if a lot of people out there are running VMware virtualized Linux MySQL machines on NetApp storage ? Any thoughts on how to configure things to get the best performance ? What are people generally doing ? - database on vmdk file in VMware datastore (and from ESX using either NFS, iSCSI or FCP to access the datastore) - NFS mount of a NetApp volume from the Linux MySQL machine - iSCSI LUN mapping from the Linux MySQL machine - FCP LUN mapping (via Raw Device Mapping in VMware) Any thoughts and recommendations ? Thanks in advance! Best regards, Filip

2 1

High CPU utilizations and file I/O
by Milazzo Giacomo 05 Oct '09

05 Oct '09

Hi all, From some days the CPU of a 3020C reaches 100% slowing down all processes. Maybe some area of a 3020HA is stressed on I/O. There's a VMware on NFS farm using both servers and VDI also! The customer states that in the NFS volume for VMware there's an high activity of continous destruction and building of VMware vdisk... Is there some tool that can let me understand which volume is under stress and in case move it on the other head? Or maybe this filer is undersized for the job that has been asked... Regards, Dott. Giacomo Milazzo [cid:image001.jpg@01CA42BC.89037330] Technical Account Manager Sinergy SpA Filiale di Roma * 00148. viale Castello della Magliana, 38 ' (+39) 3406001045 0665970252 7 +39 02 26922048 * Giacomo.Milazzo(a)Sinergy.it

5 7

Re: Thanks for Joining Tech OnTap!
by lists＠up-south.com 02 Oct '09

02 Oct '09

Please make this stop Sent via BlackBerry from T-Mobile

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters October 2009