To: Richard,

I discovered that (too late) after the fact.

Thanks.

 

To: Basil,

RG0 had 12 drives, RG1 had 11 drives.  I changed the RG size to 16 and added 8 drives, 5 of which added to RG1 and OnTap created RG2 with 3 drives.  Thanks for the tip on previewing the RG layout.  I’ll keep that in mind.

 

To: Jordan,

Thanks.

 

And to all of the others out there curious, there is currently sufficient capacity in the aggregate.  Next year we intend to refresh (Clustered) that will eliminate the issue.

 

 

I think by default it only adds disks to the ‘last’ (or highest number raid group) . You have to use the –g <raid-group> option to add to ‘other’ raid groups.

 

So if you changed the aggr size to 16, you then want to add 4 disks that rg0, then add 4 disks to rg1.

 

Then you want to run reallocate on the volumes.

 

--rdp

 

 

Hello toasters,

 

A few weeks ago, I had the opportunity to destroy an aggregate in order to consolidate capacity.  I started off with two aggregates, each with two RG and both aggr were 600GB drives only the older drives were FC/15K whereas the new aggregate is SAS/10K (I know you can mix RPMs and I’m ok with that).  What I’m not ok with is what happened when I attempted to add 8 drives to the new aggregate.  The current RG size was 12 and there were 12 drives in the first RG and 11 in the second, I then changed the RG size to 16 and added the drives to the aggregate (expecting to add 4 in each RG).  But what really happened is that OnTap added 5 drives to RG1 and created RG2 with the remaining 3 drives.

 

Support couldn’t find any documentation on this and (I knew this) that it could only be corrected by destroying the aggregate.  Have any of you experienced this?

 

Thanks,

Bill

 

-Long time lurker, first time poster

===================================

Please consider the environment before printing this e-mail

Cleveland Clinic is ranked as one of the top hospitals in America by U.S.News & World Report (2014). Visit us online at http://www.clevelandclinic.org for a complete listing of our services, staff and locations. Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you.