That’s the 2-port 40G card with QSFPs and those funny new cables, no breakout cables.
http://cdn3.bigcommerce.com/s-
uiigcj2/product_images/ uploaded_images/mtp-cable.jpg? t=1424456134
Best,
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: tmac [mailto:tmacmd@gmail.com]
Gesendet: Freitag, 27. Januar 2017 13:40
An: Alexander Griesser <AGriesser@anexia-it.com>
Cc: toasters@teaparty.net
Betreff: Re: X1144A - No link
Curious...are you using it as a two-port 40Gb card or using the breakout cable?
On Fri, Jan 27, 2017 at 7:13 AM, Alexander Griesser <AGriesser@anexia-it.com> wrote:
Good question – I’m using the QSFPs and the cables that came with the cards, so I’m positive that those should be supported.
But I’m trying to find out.
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: tmac [mailto:tmacmd@gmail.com]
Gesendet: Freitag, 27. Januar 2017 13:04
An: Alexander Griesser <AGriesser@anexia-it.com>
Cc: toasters@teaparty.net
Betreff: Re: X1144A - No link
what is the cable that you are using? Anything supported?
On Fri, Jan 27, 2017 at 5:16 AM, Alexander Griesser <AGriesser@anexia-it.com> wrote:
Hi,
I’ve just installed those fancy X1144A cards in one of our AFF300 systems and it seems they’re getting recognized properly, but I’m not able to get a link on them.
sysconfig says:
slot 2: 40 Gigabit Ethernet Controller XL710 QSFP+
e2a MAC Address: 3c:fd:fe:a2:90:c8 (auto-unknown-down)
e2e MAC Address: 3c:fd:fe:a2:90:c9 (auto-unknown-down)
SAN01::> net port show -port e2*
(network port show)
Node: SAN01-01
Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status
--------- ------------ ---------------- ---- ---- ----------- --------
e2a Default - down 1500 auto/10 -
e2e Default - down 1500 auto/10 -
Node: SAN01-02
Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status
--------- ------------ ---------------- ---- ---- ----------- --------
e2a Default - down 1500 auto/10 -
e2e Default - down 1500 auto/10 -
4 entries were displayed.
For testing purposes, I did connect e2a on node1 to e2a on node 2 and I already tried exchanging the QSFPs and cables, but still no dice.
Any idea what could be wrong here?
According to HWU, the minimum required OS version is 9.1RC2, which is exactly what is installed currently:
SAN01::> version
NetApp Release 9.1RC2: Thu Nov 24 08:59:46 UTC 2016
Best,
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters
