NetBoot is supported to reimage the boot device (CF or UFM) which is what you want here. Net booting into full Data ONTAP is indeed not supported.

So you may reinstall the same version as was used before using netboot and then update.

Отправлено с iPhone

22.05.2013, в 23:45, "Jeff Cleverley" <jeff.cleverley@avagotech.com> написал(а):

Tim,

I'll give it a try.  I tried doing the same thing a few months ago on a 6080 and it wouldn't update the flash.  I had my doubts about those flash cards anyway.  I also thought I saw netbooting 8.x wasn't supported, but I guess this is just updating the flash anyway.

Thanks for the tip.

Jeff

On Wed, May 22, 2013 at 1:12 PM, tmac <tmacmd@gmail.com> wrote:
I just did this yesterday...

if you connect e0a or e0b to the network, boot off the compact flash and interrupt the boot process
after the LOADER but before ONTAP finishes loading (i.e. when the square box shows up
that says to press control-c to interrupt the boot process)

Then choose the option to install new software.
It will ask which interface and may need to reboot in which case, repeat again
It will also ask for the URL to the software (have the tgz file on a local http server)
and a username (just hit return if not needed)

This should install the latest OS on the boot device and ask to reboot .

FYI, netapp just release a new BIOS/LOADER for the FAS3140 (and a bunch of the newer platforms)
Be sure to update that and if your RLM is less than 4.1, update it to current also.


--tmac

Tim McCarthy
Principal Consultant

          

Clustered ONTAP                                                        Clustered ONTAP
 NCDA ID: XK7R3GEKC1QQ2LVD        RHCE5 805007643429572      NCSIE ID: C14QPHE21FR4YWD4
 Expires: 08 November 2014                 Expires w/release of RHEL7      Expires: 08 November 2014



On Wed, May 22, 2013 at 2:53 PM, Jeff Cleverley <jeff.cleverley@avagotech.com> wrote:
Greetings,

I'm replacing a 3140 with a 3270 stand-alone NearStore replacement.  The current 3140 OS is 8.1.2P3 and the new head shipped with 8.1.2.  Is that going to be close enough for the system to boot from the old system root disk, or does it have to be an exact match?  If there is a way to modify the boot config from the command line instead of pulling the compact flash, I'd be OK with that also.

Thanks,

Jeff

--
Jeff Cleverley
Unix Systems Administrator
4380 Ziegler Road
Fort Collins, Colorado 80525
970-288-4611

_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters





--
Jeff Cleverley
Unix Systems Administrator
4380 Ziegler Road
Fort Collins, Colorado 80525
970-288-4611
_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters