Greetings,
Does netstat show anything? Can you initiate an tcpdump from the filer and look at port 80 or 443?

I just checked on my ONTAP 8 7 mode filer and I can see 443 connections in netstat but ofcourse my filerview is working fine.




-----Original Message-----
From: toasters-bounces@teaparty.net on behalf of Klise, Steve
Sent: Wed 8/31/2011 10:17 PM
To: 'tmacmd@gmail.com'
Cc: 'toasters@teaparty.net'
Subject: Re: 8.0.2p1

Yep. Thought I had mentioned that but yes, tried the installed version. I am thinking of going back to 8.01px or a new 802D if its out there yet.
Thanks for the suggestion.

Strange issue.

----- Original Message -----
From: tmac [mailto:tmacmd@gmail.com]
Sent: Wednesday, August 31, 2011 07:11 PM
To: Klise, Steve
Cc: chaim.rieger@gmail.com <chaim.rieger@gmail.com>; sklise@hotmail.com <sklise@hotmail.com>; toasters@teaparty.net <toasters@teaparty.net>
Subject: Re: 8.0.2p1

Just curious...

Have you tried re-installing the software and rebooting?

i.e.
software install 802p1.tgz
download
reboot

--tmac
         Tim McCarthy
     Principal Consultant



On Wed, Aug 31, 2011 at 9:21 PM, Klise, Steve <klises@sutterhealth.org> wrote:
> Nope.
>
> Tried IP name, fully qualfied name, different browser IE6 8 9
>
> From: Chaim Rieger [mailto:chaim.rieger@gmail.com]
> Sent: Wednesday, August 31, 2011 06:18 PM
> To: steve klise <sklise@hotmail.com>
> Cc: toasters@teaparty.net <toasters@teaparty.net>
> Subject: Re: 8.0.2p1
>
>
> Can you access it via the ip address
>
> On Aug 31, 2011 9:16 PM, "steve klise" <sklise@hotmail.com> wrote:
>>
>> Figured I would ask the crowed this one... I have a current issue with a
>> version of ontap (8x) and we have been working with support to reproduce in
>> our lab and at Netapp (NDMP is not working with some of our vols). Make a
>> long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2,
>> then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't
>> RTFM going backwards... So it was bad). I had to go on vaction and a Netapp
>> SE came onsight to repair and get the filer back up to 8.x for the support
>> folks. I was not there, but the current filer is running is runnin OT
>> 8.0.2p1 and I can do the normal console stuff, system manager, blah blah.
>> Problem:filerview is not launching, and I don't think it ever has worked
>> since 8.0.1p2. I compared to another files options, and they all seemed in
>> order. I also ran the software download and rebooted. What is strange is I
>> can telnet to port 80, but I get a 404 errror. I tried via IP, via
>> ip/Na_filer, everything I can think of.. Its in the IO lab, so I can blast
>> it... Any suggestions is appreciated..
>
> _______________________________________________
> Toasters mailing list
> Toasters@teaparty.net
> http://www.teaparty.net/mailman/listinfo/toasters
>
>

_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters