On Nov 16, 2011 4:04 PM, "Blake Golliher" <thelastman@gmail.com> wrote:

Are you running 7.3.3 or later?  What does sysconfig -a tell you?  The
top part tells you if it's Multi-Path HA or Mixed-Path.

       NetApp Release 8.0.1P4 7-Mode: Sat Apr  2 13:41:25 PDT 2011
          .......
       System Rev: A2
       System Storage Configuration: Multi-Path HA
       System ACP Connectivity: Full Connectivity
         ........

-Blake

On Wed, Nov 16, 2011 at 3:27 PM, Chaim Rieger <chaim.rieger@gmail.com> wrote:
> assuming i have two loops (id 00-04, and 10-18)
> 1 4 port sas card (0a-0d)
>
> loop 1
> 00A connects to 001a 0a
> 00B connects to 001b 0a
> ...
> 04A connects to 001b 0b
> 04B connects to 001a 0b
> loop2
> 10A connects to 001a 0c
> 10B connects to001b 0c
> ...
> 18A connects to 001b 0d
> 18B connects to 001a 0d
>
> KEY =
> 00A = Shelf ID 00 Module A
> 001A = Filer 001a/b
> 0a = SAS port A
>
> Its been a long three days of no sleep, but this is mpha, correct ?
>
>
> _______________________________________________
> Toasters mailing list
> Toasters@teaparty.net
> http://www.teaparty.net/mailman/listinfo/toasters
>