-----Original Message-----
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Warmenhoven, Dan
Sent: Tuesday, 22 April 2008 10:50 AM
To: Roach, Steven; voiperster@gmail.com; toasters@mathworks.com
Cc: ScottUCE@aol.com
Subject: RE: Licensing Question

None of NetApp's software licenses are transferable, and they never have been in my 14 years as CEO. 

 

Dan

 

Dan Warmenhoven
Chairman & CEO

NetApp, Inc.
1-408-822-6600 Direct
dan@netapp.com
www.netapp.com

---

From: ScottUCE@aol.com [mailto:ScottUCE@aol.com]
Sent: Monday, April 21, 2008 4:29 PM
To: Roach, Steven; voiperster@gmail.com
Cc: toasters@mathworks.com
Subject: Re: Licensing Question

Peter:

 

Some used NetApp filers DO have transferable ONTAP licenses.  We have been providing them for many years and would be happy to answer any questions you might have.

 

Scott

 

Scott Fischmann
Union Computer Exchange, Inc.
7600 West 27th Street
Building B1
Minneapolis, Minnesota  55426
scott@unioncomputer.com
952.935.7282 - Office
952.240.6835 - Mobile (urgent calls only)

 

"Helping our customers make each dollar go further - since 1991!"

 

 

 

 

 

In a message dated 4/21/2008 9:27:37 AM Central Daylight Time, Steven.Roach@netapp.com writes:

Peter,

If all you wanted was access via FCP that is the only license you would need, a software subscription also would be needed so you can download the Data OnTap.

A hardware subscription would not be a bad idea. Not sure how much the cost is, I would certainly have a conversation with your local NetApp Sales guy or a Channel Sales rep.




On 4/20/08 10:33 PM, "Peter Rosenthal" <voiperster@gmail.com> wrote:

Thanks Steven,

Is the FCP license all that is required or is there some sort of base license. Any ballpark figure on the license cost?

Thanks.

2008/4/21 Roach, Steven <Steven.Roach@netapp.com>:

Hey Peter,

Resetting a password is very easy, During the boot hit Control + C to enter in to Special Menu and one of the options there will allow to you to reset the password.

Licenses are a whole other story. Licenses do not transfer with Used equipment. If you buy a used FAS270 will have to buy an "FCP" license to access it over Fibre Channel.

 

---

From: Peter Rosenthal [mailto:voiperster@gmail.com]
Sent: Sun 4/20/2008 6:36 PM
To: toasters@mathworks.com
Subject: Licensing Question

Hello,

We are considering getting some used netapps equipment. I am mostly concerned with the pitfalls of licensing and would be grateful for any pointers.

Specifically we are currently looking at a FAS270. We want to connect it via fibre channel to a FC switch and then two FC HBAs on different hosts. I do not want to end up with a door stop product and therefore I would like to know if:

Will I have any problems resetting any existing passwords that might exist on the filer?
Is the license required to access the filer via fibre channel optional or will any licensed filer support it?

Thanks.

NetApp
Steve Roach
Mobile (215)237-1660
Support (888)463-8277

 

---

Need a new ride? Check out the largest site for U.S. used car listings at AOL Autos.

***********************************************************

CAUTION: This email and files included in its transmission

are solely intended for the use of the addressee(s) and may

contain information that is confidential and privileged.

If you receive this email in error, please advise us

immediately and delete it without copying the contents

contained within. Woolworths Limited (including its group

of companies) do not accept liability for the views

expressed within or the consequences of any computer

viruses that may be transmitted with this email. The

contents are also subject to copyright. No part of it

should be reproduced, adapted or transmitted without the

written consent of the copyright owner.

***********************************************************