Seems to work fine on 9.7P11. Maybe a more recent change?
XXXX::> set -privilege advanced
Warning: These advanced commands are potentially dangerous; use
them only when directed to do so by NetApp personnel.
Do you want to continue? {y|n}: y
XXXX::*> statistics show-periodic -counter
total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy
XXXX: cluster.cluster: 10/22/2021 08:36:25
total total data data cluster cluster cluster
recv sent recv sent busy recv sent
-------- -------- -------- -------- ------- -------- --------
2.91GB 4.08GB 735MB 2.09GB 51% 2.19GB 1.99GB
3.19GB 4.79GB 836MB 2.34GB 40% 2.37GB 2.44GB
XXXX: cluster.cluster: 10/22/2021 08:36:30
total total data data cluster cluster cluster
recv sent recv sent busy recv sent
-------- -------- -------- -------- ------- -------- --------
Minimums:
2.91GB 4.08GB 735MB 2.09GB 40% 2.19GB 1.99GB
Averages for 2 samples:
3.05GB 4.43GB 786MB 2.22GB 45% 2.28GB 2.22GB
Maximums:
3.19GB 4.79GB 836MB 2.34GB 51% 2.37GB 2.44GB
XXXX::*> version
NetApp Release 9.7P11: Tue Jan 12 23:00:49 UTC 2021
Regards, MP
can't seem to get this to work on a 9.7 box. works fine on 9.3
am I missing something obvious?
pd-san2::*> set -privilege advanced
pd-san2::*> statistics show-periodic -counter total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy
Error: command failed: entry doesn't exist
pd-san2::*> set -privilege diag
Warning: These diagnostic commands are for use by NetApp personnel only.
Do you want to continue? {y|n}: y
pd-san2::*> statistics show-periodic -counter total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy
Error: command failed: entry doesn't exist
pd-san2::*> version
NetApp Release 9.7P13: Thu Apr 15 02:06:46 UTC 2021
_______________________________________________ Toasters mailing list Toasters@teaparty.net https://www.teaparty.net/mailman/listinfo/toasters