It does not look like similar functionality exists (documented) for cDOT. For CIFS you can control visibility on share level, but for NFS it is all or nothing.

https://kb.netapp.com/support/index?page=content&id=8010364&locale=en_US&access=s

---

With best regards

Andrei Borzenkov

Senior system engineer

FTS WEMEAI RUC RU SC TMS FOS

FUJITSU

Zemlyanoy Val Street, 9, 105 064 Moscow, Russian Federation

Tel.: +7 495 730 62 20 ( reception)

Mob.: +7 916 678 7208

Fax: +7 495 730 62 14

E-mail: Andrei.Borzenkov@ts.fujitsu.com

Web: ru.fujitsu.com

Company details: ts.fujitsu.com/imprint

This communication contains information that is confidential, proprietary in nature and/or privileged.  It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) or the person responsible for delivering it to the intended recipient(s), please note that any form of dissemination, distribution or copying of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender and delete the original communication. Thank you for your cooperation.

Please be advised that neither Fujitsu, its affiliates, its employees or agents accept liability for any errors, omissions or damages caused by delays of receipt or by any virus infection in this message or its attachments, or which may otherwise arise as a result of this e-mail transmission.

From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Jeremy Webber
Sent: Friday, February 05, 2016 5:44 AM
To: Toasters
Subject: Re: Hide snapshots from NFS clients in 8.3.1

Hi and thanks for answering.

We have tried the volume setting. The problem with that is that it makes the snapshots completely inaccessible to the NFSv3 client. If the snapshots are inaccessible then you cannot access snapshot backup copies from the client, and we want to do that.

I want the snapshots to be accessible but not visible, as we have in 7-mode.

Thanks,

  Jeremy

On 5 Feb 2016, at 1:33 pm, mkopenski@gmail.com wrote:

In 7-mode you could hide the snap dir on each volume by changing the option nosnapdir to on

In C-mode the just do a vol modify <vol_name> -snapdir-access false to hide the snapshot from the system that has access to it

On Thu, Feb 4, 2016 at 9:25 PM, Jeremy Webber <Jeremy.Webber@al.com.au> wrote:

In 7-mode we are able to make snapshots accessible, but invisible to NFSv3 clients.

In this mode there is a .snapshot directory, but if you ‘ls’ that directory it appears empty. However, if you ls .snapshot/hourly.0 say then you can see that the snapshot is in fact there.

We now have an 8.3.1 CDOT filer and have not been able to work out how to reproduce the behaviour. The snapshots are either accessible and visible (which causes problems for programs which walk the tree) or not accessible at all.

NetApp support have not been able to help so far. Can anybody on this list?

Thanks,

  Jeremy

p.s. the relevant 7-mode option is:

nfs.hide_snapshot            on         

-- 
Jeremy Webber
Senior Systems Engineer
Animal Logic Pty Ltd
Tel: +61 2 8310 3577
Main: +61 2 9383 4800
Fax: +61 2 9383 4801

_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters

-- 
Jeremy Webber
Senior Systems Engineer
Animal Logic Pty Ltd
Tel: +61 2 8310 3577
Main: +61 2 9383 4800
Fax: +61 2 9383 4801