I agree with Jeff… Could be a bunch of things.. I know in the past if you added storage and didn’t do a reallocate, could be the cause.. Could be lots of things, but a perfstat is a good 1st pass. Look at performance advisor if you have it.. Maybe you have some hot disks.. A little more info such as “what’s slow” would be appreciated to assist further.
From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Jeff Mohler
Sent: Wednesday, February 11, 2015 5:00 PM
To: Edward Rolison
Cc: toasters@teaparty.net
Subject: Re: IOPs from a controller
I suppose, somewhere between 1 and 100,000 would be about right.
I would call your sales machine, and ask for a PS Performance Review.
Not that Support cant say what its doing, but PS will tell you where it's been...and where it's going.
On Wed, Feb 11, 2015 at 5:54 PM, Edward Rolison <ed.rolison@gmail.com> wrote:
Does anyone have a very rough rule of thumb as to IOPs you might expect out of a controller?
I've got a FAS6280 that's starting to 'be a bit sluggish'. I'm inclined to shrug and say 'yes, it's doing 20K IOPs'.
I know there's very much an 'it depends' in there - but 'very rough' is good enough for me here. (Disk wise - it's not particularly high on disk utilisation, nor is the network bandwidth particularly full).
_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters
--
---
Gustatus Similis Pullus