Hi,

 

I’m trying to setup a FC attached tape drive to the onboard FC ports (0c and 0d) of a FAS3210

 

From my understanding I need to change the FC port to an Initiator, however this requires a reboot.

 

FILER1> fcadmin config -t initiator 0d

Thu Sep  1 11:54:21 GMT [fci.config.state:info]: Fibre channel target adapter 0d is in the PENDING (initiator) state.

A reboot is required for the new adapter configuration to take effect.

 

 

Does anyone know if there is a way round having to reboot the filer ?

 

Thanks

 

Matt

 

____________________________

Matt Davies

Director of International IT Operations

General Atlantic

23 Savile Row

London

W1S 2ET

 

Tel: +44 207 484 3203

Fax: +44 207 484 2803

Mobile: +44 777 559 4265

____________________________

 


_____________________________________________________________
This e-mail (including all attachments) is confidential and may be privileged.
It is for the exclusive use of the addressee only. If you are not the addressee,
you are hereby notified that any dissemination of this communication is strictly
prohibited. If you have received this communication in error, please erase all
copies of the message and its attachments and notify us immediately at
help@generalatlantic.com . Thank You.