Check if you have turned off quotas for the volume where these qtrees are located. DFM expects quotas to be turned on, and quotas to be set for the qtrees it monitors, even if it's just a "counting rule" - one that has a "-" instead of a hard/soft/threshold limit.

 

Eyal.

 

On 6/6/06, Hannu.Kettinen@ubs.com <Hannu.Kettinen@ubs.com> wrote:

Hey,

We are having an issue with DFM reporting "qtree capacity" incorrectly,
no real errors can be found in the logs, and it is quite a mystery.

It worked perfectly until last week, and now it is only reporting that
same old figures over and over again, and never updating the numbers.

Does any of you have experiences regarding these kind of issues and how
did you solve it?

(we are running dfm 3.2)


Thanks and Regards,
Hannu

Visit our website at http://www.ubs.com

This message contains confidential information and is intended only
for the individual named.  If you are not the named addressee you
should not disseminate, distribute or copy this e-mail.  Please
notify the sender immediately by e-mail if you have received this
e-mail by mistake and delete this e-mail from your system.

E-mail transmission cannot be guaranteed to be secure or error-free
as information could be intercepted, corrupted, lost, destroyed,
arrive late or incomplete, or contain viruses.  The sender therefore
does not accept liability for any errors or omissions in the contents
of this message which arise as a result of e-mail transmission.  If
verification is required please request a hard-copy version.  This
message is provided for informational purposes and should not be
construed as a solicitation or offer to buy or sell any securities or
related financial instruments.