Have pulled out all the ram, still the same black screen

 

 

 

I would start with the obvious.

RAM.

I don’t recall the configuration in there, been a LONG time, but remove half of it (if you can) or Ebay it..its gotta be cheap by now.


On 10/5/05 8:24 PM, "Alex Soo" <alex@coolserve.com> wrote:

After it report some recoverable error in the ECC SRAM for about 3 days. I try to reboot but It stuck at the boot. The LCD show the top half fill with Black box. I have try to remove all the PCI card and ram for reboot with the same result. Any ideal what is the cause for this, faulty CPU / mother board or any other? Was hoping to fire it up for enough time to retrieve all the file in the system and decommission the unit. Any suggestion to retrieve the file?
 
 
Thanks,
Alex Soo


CONFIDENTIAL NOTE: The information contained in this email is intended only for the use of the individual or entity named above and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete the mail. Thank you.