On Monday, May 15, 2017, 12:40, Ehrenwald, Ian <Ian.Ehrenwald@hbgusa.com> wrote:
HelloI’m curious what other people are using for software to back up volumes to tape? We’ve recently purchased a Dell TL4000 with 2 x LTO7 drives and 24 tapes. We have a four-node cluster running 8.3.2Px and for now we’re directly connecting the TL4000’s A-side FC to node 1 and the B-side to node 3. AFAIK the device itself is set up correctly and all the physical and virtual status LEDs and are happy.After installing the correct TCF file, ‘sysconfig –t’ run against the directly connected nodes shows the drive as supported (IBM LTO-7 ULT3580) with all sorts of device name permutations (rewind, no rewind, unload, etc). Running ‘storage tape show’ shows two tape drives, one per directly attached node, named st0 and a media changer on node 3 named mc0. The tape drives are offline, the media changer is available.I’ve played with the various ‘storage tape’ commands but am making no headway. I’m sure the docs are out there, and I’ve looked through the NetApp documentation as well as Googling for a while, but don’t see a way to control the media changer to, for example, tell tape drive 1 to load slot 6, and then another command to dump a volume to it. I understand we want SVM-scoped ndmp. Does anyone have bare bones examples using ndmp or some other local utility? If we need to purchase something like Tivoli or Netbackup or CommVault etc then I guess we will, but we’d prefer free.Thanks!--Ian EhrenwaldSenior Infrastructure EngineerHachette Book Group, Inc.This may contain confidential material. If you are not an intended recipient, please notify the sender, delete immediately, and understand that no disclosure or reliance on the information herein is permitted. Hachette Book Group may monitor email to and from our network._______________________________________________Toasters mailing list