Thanks for all your input so far – will keep you posted on the outcome, but for now it seems as if I got wrong SFP transceivers due to an error in the quoting tool…
New transceivers should be there by tomorrow hopefully.
Alexander Griesser
System-Administrator
ANEXIA Internetdienstleistungs GmbH
Telefon: +43-5-0556-320
Telefax: +43-5-0556-500
E-Mail:
ag@anexia.at
Web:
http://www.anexia.at
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: Borzenkov, Andrei [mailto:andrei.borzenkov@ts.fujitsu.com]
Gesendet: Dienstag, 10. Juni 2014 08:22
An: Alexander Griesser
Cc: Toasters
Betreff: Re: FCP Ports operational down
Brocade shows "no light" and NetApp shows "not connected" which suggests some issues on physical level. Did you verify that brocade port is using multi-mode transceiver and also you do not accidentally use single mode cable?
Отправлено с iPhone
09 июня 2014 г., в 15:43, "Alexander Griesser" <ag@anexia.at> написал(а):
Hi there,
I’m having a hard time currently connecting my new FAS8020 to our existing fabric – the FCP ports just won‘t get online and I’m not sure where exactly the problem is and how to debug that since I’m more the NAS guy not having much practical experience with FCP configurations, so here’s the deal for all of you who are wanting to help.
FAS8020 Clustered Data Ontap 8.2.1
Brocade DS4900B
Brocade Switchport:
> portcfgshow 0
Area Number: 0
Speed Level: AUTO(HW)
Fill Word: 0(Idle-Idle)
AL_PA Offset 13: OFF
Trunk Port ON
Long Distance OFF
VC Link Init OFF
Locked L_Port OFF
Locked G_Port OFF
Disabled E_Port OFF
Locked E_Port OFF
ISL R_RDY Mode OFF
RSCN Suppressed OFF
Persistent Disable OFF
LOS TOV enable OFF
NPIV capability ON
QOS E_Port OFF
Port Auto Disable: OFF
Mirror Port OFF
F_Port Buffers OFF
Fault Delay: 0(R_A_TOV)
NPIV PP Limit: 126
> portshow 0
portIndex: 0
portName:
portHealth: OFFLINE
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x1 PRESENT U_PORT
LocalSwcFlags: 0x0
portType: 10.0
POD Port: Port is licensed
portState: 2 Offline
Protocol: FC
portPhys: 4 No_Light portScn: 0
port generation number: 0
state transition count: 0
portId: 010000
portIfId: 4302100d
portWwn: 20:00:00:05:1e:5b:f9:a3
portWwn of device(s) connected:
Distance: normal
portSpeed: N4Gbps
LE domain: 0
FC Fastwrite: OFF
Interrupts: 2 Link_failure: 0 Frjt: 0
Unknown: 0 Loss_of_sync: 0 Fbsy: 0
Lli: 2 Loss_of_sig: 2
Proc_rqrd: 5 Protocol_err: 0
Timed_out: 0 Invalid_word: 0
Rx_flushed: 0 Invalid_crc: 0
Tx_unavail: 0 Delim_err: 0
Free_buffer: 0 Address_err: 0
Overrun: 0 Lr_in: 0
Suspended: 0 Lr_out: 0
Parity_err: 0 Ols_in: 0
2_parity_err: 0 Ols_out: 0
CMI_bus_err: 0
Port part of other ADs: No
FCP Adater on NetApp:
Node: jetfire
Adapter: 1b
Description: Fibre Channel Target Adapter 1b (QLogic 8324 (8362), rev. 2, 16G)
Physical Protocol: fibre-channel
Maximum Speed: 16
Status: link not connected
Substatus: ADAPTER UP
Host Port Address: 0
Firmware Revision: 6.10.0
Data Link Rate (Gbit): 0
Fabric Established: false
Connection Established: loop
Mediatype: ptp
Configured Speed: 4
Configured State: up
Switch Port: :
AFAIK, the 16Gbit/s adapter should be backwards compatible to 4Gbit/s, our switch only has 4Gbit/s but it supports NPIV which seems to be a requirement for running Clustered Data Ontap via FC.
So, I have no idea what information I should provide upfront for someone who’s wanting to help me through get through that, but I’m more than happy to send more info when requested.
Thanks,
Alexander Griesser
System-Administrator
ANEXIA Internetdienstleistungs GmbH
Telefon: +43-5-0556-320
Telefax: +43-5-0556-500
E-Mail: ag@anexia.at
Web: http://www.anexia.at
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters