Nope.

Tried IP name, fully qualfied name, different browser IE6 8 9
 
From: Chaim Rieger [mailto:chaim.rieger@gmail.com]
Sent: Wednesday, August 31, 2011 06:18 PM
To: steve klise <sklise@hotmail.com>
Cc: toasters@teaparty.net <toasters@teaparty.net>
Subject: Re: 8.0.2p1
 

Can you access it via the ip address

On Aug 31, 2011 9:16 PM, "steve klise" <sklise@hotmail.com> wrote:
>
> Figured I would ask the crowed this one... I have a current issue with a version of ontap (8x) and we have been working with support to reproduce in our lab and at Netapp (NDMP is not working with some of our vols). Make a long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2, then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't RTFM going backwards... So it was bad). I had to go on vaction and a Netapp SE came onsight to repair and get the filer back up to 8.x for the support folks. I was not there, but the current filer is running is runnin OT 8.0.2p1 and I can do the normal console stuff, system manager, blah blah.
> Problem:filerview is not launching, and I don't think it ever has worked since 8.0.1p2. I compared to another files options, and they all seemed in order. I also ran the software download and rebooted. What is strange is I can telnet to port 80, but I get a 404 errror. I tried via IP, via ip/Na_filer, everything I can think of.. Its in the IO lab, so I can blast it... Any suggestions is appreciated..