On Apr 26, 2015, at 7:11 AM, Fred Grieco <fredgrieco@yahoo.com> wrote:

Ontap 8.1.2 has a bug that with dedupe filling volumes with metadata that requires running "sis start -s" occasionally.  Not sure if that's what's going on here:

NetApp Knowledgebase - Stale metadata not automatically removed as part of the 'sis start' operation on the volume when running Data ONTAP® 8.1x

Fred

				NetApp Knowledgebase - Stale metadata not automatically ... This Knowledgebase article is not available to the public. Please login with your NetApp Support Site account in order to view the KB.
				View on kb.netapp.com	Preview by Yahoo

 

---

From: tmac <tmacmd@gmail.com>
To: Fletcher Cocquyt <fcocquyt@stanford.edu>
Cc: "<toasters@teaparty.net> Lists" <toasters@teaparty.net>
Sent: Sunday, April 26, 2015 9:24 AM
Subject: Re: Vol 100% - which VM?

Ok, let's start here:

Are you thin provisioning?

If so, it is possible that some other volume on the same aggregate got out of hand.

Do you have OnCommand Unified Manager, OnCommand Performance Manager?

Those  might have been able to predict (if you are using cDOT)

--tmac

Tim McCarthy

Principal Consultant

  

On Sun, Apr 26, 2015 at 8:49 AM, Fletcher Cocquyt <fcocquyt@stanford.edu> wrote:

Never seen this before

FAS3250
ONTAP 8.1.2

at 2am the volume hosting 110 VMs fills up and starts alerting

Get the call and delete several snapshots to take it to 83%, reboot the 110 VMs ;(

I have lots of tools (splunk, inmon etc) they are not able to show why this volume filled up

ideas?



_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters

_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters

_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters